DTF transfer powder

DTF printing powder is white or black in colour. It acts as an adhesive material that binds the colour pigments of the print to the fabric fibres. There are different grades of DTF hot melt powders which are specified in microns. An appropriate grade should be chosen according to the requirements. Black powder is mainly used on dark textiles to avoid leaving a slight trace of adhesive residue.

GridView VueListe

7 article(s)

  1. DTF White Transfer Powder - 1kg

    Product In stock

    Ref:ZHS_POUDRE_1KG

    Discover our DTF transfer powder!

    You can use our powder with all DTF printers using DTF transfer inks and films. It is a thermoplastic polyurethane (TPU) hot melt adhesive powder specially formulated for DTF.

    How to use hot melt powder?

    DTF transfer is made using DTF transfer films and DTF transfer powder.
    First, print from your DTF or DTG adapted printer with textile ink or DTF ink onto sheets or rolls of DTF film.
    ollow your print with DTF transfer powder.
    t remains to dry the powder at 120°C for 90 seconds. For the transfer drying step, you can use a heat press, a screen printing tunnel, an intermediate screen printing dryer, an oven or a conventional oven.
    All that remains is to apply your transfer to your textile at 150°C for 8 to 10 seconds with a cold peel.

    You can:
    - For your white or light textiles: print only your colours
    - For your dark textiles: you must print an under layer of white then your colours

    What is the advantage of DTF (Direct to Film)?

    DTF allows transfers on both light and dark textiles thanks to the white inks applied as an undercoat.
    DTF gives an airy, smooth-touch and more stretchy transfer.
    DTF does not require the image to be cut out of the transfer.
    DTF allows for vivid colours.

    The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

    The powder can be stored in a dry place for 2 years. It gives your transfer an excellent resistance to washing (up to 90°C).

    To know more about it
    EX. VAT : 24,92 € INCL. VAT : 29,90 €

  2. < 3

    in stock

    DTF Powder Shovel - 600 grams - 350mm

    Product In stock

    Ref:PELLE_350MM
    To make reloading with DTF powder easier, we offer this aluminium scoop. The scoop is 350mm long and can load about 600 grams of DTF powder in one go. We recommend it for 60cm printers and powder machines. Read more about this product
    EX. VAT : 13,25 € INCL. VAT : 15,90 €

  3. < 6

    in stock

    DTF Powder Shovel - 400 grams -260mm

    Product In stock

    Ref:PELLE_260MM
    To make reloading with DTF powder easier, we offer this aluminium scoop. The scoop is 260mm long and can load about 400 grams of DTF powder in one go. We recommend it for 30cm printers and powder machines. Read more about this product
    EX. VAT : 10,75 € INCL. VAT : 12,90 €

  4. < -12

    in stock

    DTF white transfer powder

    Poudre blanche pour transfert DTF - 2KG

    Product In stock

    Réf.:ZHS_poudre_2KG

    Discover our DTF transfer powder!

    You can use our powder with all DTF printers using DTF transfer inks and films. It is a thermoplastic polyurethane (TPU) hot melt adhesive powder specially formulated for DTF.

    How to use hot melt powder?

    DTF transfer is made using DTF transfer films and DTF transfer powder.
    First, print from your DTF or DTG adapted printer with textile ink or DTF ink onto sheets or rolls of DTF film.
    ollow your print with DTF transfer powder.
    t remains to dry the powder at 120°C for 90 seconds. For the transfer drying step, you can use a heat press, a screen printing tunnel, an intermediate screen printing dryer, an oven or a conventional oven.
    All that remains is to apply your transfer to your textile at 150°C for 8 to 10 seconds with a cold peel.

    You can:
    - For your white or light textiles: print only your colours
    - For your dark textiles: you must print an under layer of white then your colours

    What is the advantage of DTF (Direct to Film)?

    DTF allows transfers on both light and dark textiles thanks to the white inks applied as an undercoat.
    DTF gives an airy, smooth-touch and more stretchy transfer.
    DTF does not require the image to be cut out of the transfer.
    DTF allows for vivid colours.

    The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

    The powder can be stored in a dry place for 2 years. It gives your transfer an excellent resistance to washing (up to 90°C).

    To know more about it
    EX. VAT : 49,83 € INCL. VAT : 59,80 €

  5. DTF White Transfer Powder - 5kg bag

    Product In stock

    Ref:ZHS_POUDRE_5KG

    Discover our DTF transfer powder!

    You can use our powder with all DTF printers using DTF transfer inks and films. It is a thermoplastic polyurethane (TPU) hot melt adhesive powder specially formulated for DTF.

    How to use hot melt powder?

    DTF transfer is made using DTF transfer films and DTF transfer powder.
    First, print from your DTF or DTG adapted printer with textile ink or DTF ink onto sheets or rolls of DTF film.
    ollow your print with DTF transfer powder.
    t remains to dry the powder at 120°C for 90 seconds. For the transfer drying step, you can use a heat press, a screen printing tunnel, an intermediate screen printing dryer, an oven or a conventional oven.
    All that remains is to apply your transfer to your textile at 150°C for 8 to 10 seconds with a cold peel.

    You can:
    - For your white or light textiles: print only your colours
    - For your dark textiles: you must print an under layer of white then your colours

    What is the advantage of DTF (Direct to Film)?

    DTF allows transfers on both light and dark textiles thanks to the white inks applied as an undercoat.
    DTF gives an airy, smooth-touch and more stretchy transfer.
    DTF does not require the image to be cut out of the transfer.
    DTF allows for vivid colours.

    The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

    The powder can be stored in a dry place for 2 years. It gives your transfer an excellent resistance to washing (up to 90°C).

    To know more about it
    EX. VAT : 99,17 € INCL. VAT : 119,00 €

  6. DTF White Transfer Powder - 20kg

    Product In stock

    Ref:ZHS_POUDRE_20KG

    Discover our DTF transfer powder!

    You can use our powder with all DTF printers using DTF transfer inks and films. It is a thermoplastic polyurethane (TPU) hot melt adhesive powder specially formulated for DTF.

    Packed in 4 x 5kg bags

    How do I use hot melt powder?

    DTF transfer is made with DTF transfer films and DTF transfer powder.
    First, print from your DTF or DTG printer with textile ink or DTF ink onto sheets or rolls of DTF film.
    ollow your print with DTF transfer powder.
    t remains to dry the powder at 120°C for 90 seconds. For the transfer drying step, you can use a heat press, a screen printing tunnel, an intermediate screen printing dryer, an oven or a conventional oven.
    All that remains is to apply your transfer to your textile at 150°C for 8 to 10 seconds with a cold peel.

    You can:
    - For your white or light textiles: print only your colours
    - For your dark textiles: you must print an under layer of white then your colours

    What is the advantage of DTF (Direct to Film)?

    DTF allows transfers on both light and dark textiles thanks to the white inks applied as an undercoat.
    DTF gives an airy, smooth-touch and more stretchy transfer.
    DTF does not require the image to be cut out of the transfer.
    DTF allows for vivid colours.

    The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

    The powder can be stored in a dry place for 2 years. It gives your transfer an excellent resistance to washing (up to 90°C).

    To know more about it
    EX. VAT : 332,50 € INCL. VAT : 399,00 €

  7. < -41

    in stock

    DTF black transfer powder

    DTF Black Transfer Powder - 1kg

    Product In stock

    Ref:ZHS_POUDRE_NOIRE_1KG

    Discover our DTF transfer powder!

    You can use our powder with all DTF printers using DTF transfer inks and films. It is a thermoplastic polyurethane (TPU) hot melt adhesive powder specially formulated for DTF.

    The black powder is particularly used for application on black textiles. This allows you to avoid any excess powder on your textile during the transfer.

    How to use hot melt powder?

    DTF transfer is made with DTF transfer films and DTF transfer powder.
    First, print from your DTF or DTG printer with textile ink or DTF ink on sheets or rolls of DTF film.
    ollow your print with DTF transfer powder.
    t remains to dry the powder at 120°C for 90 seconds. For the transfer drying step, you can use a heat press, a screen printing tunnel, an intermediate screen printing dryer, an oven or a conventional oven.
    All that remains is to apply your transfer to your textile at 150°C for 8 to 10 seconds with a cold peel.

    You can:
    - For your white or light textiles: print only your colours
    - For your dark textiles: you must print an under layer of white then your colours

    What is the advantage of DTF (Direct to Film)?

    DTF allows transfers on both light and dark textiles thanks to the white inks applied as an undercoat.
    DTF gives an airy, smooth-touch and more stretchy transfer.
    DTF does not require the image to be cut out of the transfer.
    DTF allows for vivid colours.

    The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

    The powder can be stored in a dry place for 2 years. It gives your transfer an excellent resistance to washing (up to 90°C).

    To know more about it
    EX. VAT : 29,08 € INCL. VAT : 34,90 €

GridView VueListe

7 article(s)