Roland Secabo & Rabbit

How to choose the right angle for your cutting blade?

- The 45° blade is used for all types of cuts and materials with a thickness of 0.5 to 1.1 mm, it is the so-called "standard" blade.

- 60° blades are recommended for cutting thick materials such as flock, reflective vinyl, sandblasting mask....

- The 30° blades are recommended for cutting fine materials, small lettering and complex logos.

GridView VueListe

7 article(s)

  1. Box of 5 blades 45° Roland, Secabo & Rabbit

    Product In stock

    SKU:PKT_ROLAND 45

    Box of 5 blades for Roland, Secabo, Rabbit plotter...

    Dimensions :  

    Diameter: 2mm
    Length: 23mm
    Angle: 45°.

    These blades fit on all types of cutting plotter using Roland standard blades.
    Can also be used with Roland CAMM-1, BN20, CammJet, Stika, GCC, PUMA, LYNX, KOCY, Vynil espress, Liyu, Refine, Secabo, Allen Datagraph, CSR Ecom-2, Anagraph.

    The 45° angle is ideal for cutting materials with a thickness of 0.5 to 1.1mm.

    To know more about it
    EX. VAT : 33,25 € INCL. VAT : 39,90 €

  2. < -75

    in stock

    Box of 5 Roland & Secabo 30° blades

    Box of 5 blades 30° Roland, Secabo & Rabbit

    Product In stock

    SKU:PKT_ROLAND 30

    Dimension:
    Diameter: 2mm
    Length: 23mm
    Angle: 30°

    These blades can also be used with Roland CAMM-1, BN20, CammJet, Stika, GCC, PUMA, LYNX, KOCY, Vynil espress, Liyu, Refine, Secabo, Allen Datagraph, CSR Ecom-2, Anagraph.

    These blades fit all types of cutting plotter using Roland standard blades. The 30° blades are recommended for cutting thin materials (0.2 to 0.4mm), small lettering and complex logos.

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  3. < -57

    in stock

    Box of 5 Roland & Secabo 60° blades

    Box of 5 blades 60° Roland, Secabo & Rabbit

    Product In stock

    SKU:PKT_ROLAND 60

    Dimension:
    Diameter: 2mm
    Length: 23mm
    Angle: 60°

    These blades can also be used with Roland CAMM-1, BN20, CammJet, Stika, GCC, PUMA, LYNX, KOCY, Vynil espress, Liyu, Refine, Secabo, Allen Datagraph, CSR Ecom-2, Anagraph

    These blades fit on all types of cutting plotter using Roland standard blades. The 60° blades are recommended for cutting thick materials ( > 1,2mm ) such as flex, flock, reflective vinyl, sandblasting mask...

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  4. < -6

    in stock

    Adaptable blade holder for Roland plotter

    Adaptable blade holder for Roland plotter

    Product In stock

    SKU:PKT_PL_ROLAND

    Blade holder for Plotter Roland

    High quality aluminum blade holder that fits all Roland plotters.

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder. This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged. Once you have changed your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : you must change your tool holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  5. < -2

    in stock

    Blade holder for Rabbit plotter

    Rabbit Blade Holder

    Product In stock

    Ref:PKT_PL_RABBIT

    High quality aluminium blade holder that fits all Rabbit plotters.

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder.
    This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged.
    Once you have changed your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : You should change your cutter holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  6. < -10

    in stock

    Blade holder for Secabo C IV - S and T plotters

    Blade holder Secabo C IV - S and T

    Product In stock

    Ref:SCB_LAME_HOLDER_CIV

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder. This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged. Once you have changed your blade holder, you will see the cutting quality improve.

    Fits on all Secabo CIV plotters. Aluminium blade holder.

    Equipped with adjusting screw and double ball bearing.

    Tip Créadhésif : You must change your tool holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 52,00 € INCL. VAT : 62,40 €

  7. < -10

    in stock

    Blade holder Secabo C V - S II and T II

    Product In stock

    Réf.:SCB_154.800.41

    Fits on all Secabo CIV plotters. Aluminium blade holder.

    Equipped with adjusting screw and double ball bearing.

    When you lose accuracy, especially when cutting fine logos, it is time to change your cutter head. Indeed, this loss of precision can come either from the teflon tape or from the damaged blade holder. Once you have changed your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : You should change your cutter holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 52,00 € INCL. VAT : 62,40 €

GridView VueListe

7 article(s)