Press tools

GridView VueListe

Items 1 to 10 out of a total of 20

Page :
  1. 1
  2. 2
  1. Cleaning Stick for heat press

    Product In stock

    Réf.:STH_STICK_CLEAN_013690

    Entretenez et nettoyez votre presse grâce à ce stick nettoyant Stahls !

    Ce stick vous permettra de retirer tous les résidus d'encre et les dépôts collés au plateau chauffant supérieur. Pour un résultat optimal, vous devrez utiliser ce nettoyant régulièrement.

    Evitez également de tâcher vos supports lors du pressage.

    Conseils d'utilisation :
    1. Faites chauffer votre presse à chaud à 140°
    2. Appliquez le nettoyant avec parcimonie sur le plateau chauffant supérieur et laissez agir quelques secondes
    3. Frottez votre presse avec un chiffon pour nettoyer l'ensemble du plateau

    A delay of one week may apply to this product.

    To know more about it
    EX. VAT : 5,75 € INCL. VAT : 6,90 €

  2. < 2

    in stock

    Temperature tests for heat press

    Kit 10 Temperature Test Strips

    Product In stock

    Réf.:STH_THERMOTAPE_013688

    These strips will allow you to check whether the temperature of your press is homogeneous over the entire surface of the platen. This will enable you to carry out an efficient hot pressing. The kit contains 10 disposable strips.

    How to use them?
    1
    . Heat your press to 180°C
    2
    . Place your strips on the tray
    3. Press for 8 seconds at 180°C
    4. Look at the temperature indicated on the strips and adjust your press if necessary

    Tip Créadhésif : We recommend that you place three strips at different places on the tray: bottom, middle and top. This will ensure that there are no failures in the heating plate and position your customised media in the best possible way.

    To know more about it
    EX. VAT : 15,83 € INCL. VAT : 19,00 €

  3. < -20

    in stock

    Tampon pour pelage à froid

    Cold Peel Buffer

    Product In stock

    Réf.:STH_TAMPON_013691

    Ce tampon s'utilise une fois le transfert à chaud réalisé. Il vous permettra de lisser votre visuel avant d'effectuer le pelage à froid.

    L'utilisation de ce tampon favorise un refroidissement homogène de votre visuel. Vous obtiendrez ainsi un rendu de qualité professionnelle.

    Un accessoire indispensable pour une finition parfaite de tous vos visuels !

    L'Astuce Créadhésif : Effectuez des mouvements circulaires sur toute la surface de votre visuel en appliquant sur le tampon une pression homogène.

    To know more about it
    EX. VAT : 9,92 € INCL. VAT : 11,90 €

  4. Roll of high temperature tape 10 mm

    Product In stock

    Ref:SCOTCH_HT_CUIVRE

    Roll of high temperature resistant scotch tape to fix your images on its support to sublimate.

    Dimensions:
    - Length: 33 m
    - Width : 10 mm

    To know more about it
    EX. VAT : 4,96 € INCL. VAT : 5,95 € incl. VAT : From 4,90 €

  5. < -1

    in stock

    Adapter

    Platform adapter for Secabo press quick loading trolley

    Product In stock

    SKU:SCB_Beam adapter

    Thanks to this adapter that you attach to your original tray, you will be able to use the quick-loading trolley system and the sliding trolley with ease.

    To know more about it
    EX. VAT : 59,00 € INCL. VAT : 70,80 €

  6. Economiseur d'énergie pour Presse à chaud Secabo TC5 SMART & TC5 Lite

    Product In stock

    Réf.:SCB_109.ES.005.1514

    Plus besoin d'investir dans une nouvelle presse pour réduire vos coûts énergétiques ! Optez pour le Kit de Mise à Niveau ENERGY SAVER !

    Compatible avec les presses à chaud TC5 SMART et TC5 Lite, vous pourrez réaliser jusqu'à 35% d'économie d'énergie.

    Ce couvercle s'installe facilement sur le plateau supérieur et crée une isolation supplémentaire qui réduit considérablement la consommation énergétique en mode veille.

    To know more about it
    EX. VAT : 175,00 € INCL. VAT : 210,00 €

  7. Economiseur d'énergie pour Presse à chaud Secabo TC7 SMART & TC7 Lite

    Product In stock

    Réf.:SCB_109.ES.007.1514

    Plus besoin d'investir dans une nouvelle presse pour réduire vos coûts énergétiques ! Optez pour le Kit de Mise à Niveau ENERGY SAVER !

    Compatible avec les presses à chaud TC5 SMART et TC5 Lite, vous pourrez réaliser jusqu'à 35% d'économie d'énergie.

    Ce couvercle s'installe facilement sur le plateau supérieur et crée une isolation supplémentaire qui réduit considérablement la consommation énergétique en mode veille.

    To know more about it
    EX. VAT : 199,00 € INCL. VAT : 238,80 €

  8. < 4

    in stock

    Support pour presse à chaud

    Support pour presse à chaud double plateaux

    Product In stock

    Réf.:XNH_HPC-2L

    Conçu pour surélever votre presse et vous permettre de la déplacer plus facilement, ce support sur roulettes vous changera la vie !

    Facile à monter, il est également très résistant. Découvrez les joies d'une presse stable mais mobile avec ce stand.

    To know more about it
    EX. VAT : 325,00 € INCL. VAT : 390,00 €

  9. < -2

    in stock

    Height adjustable table for heat press - STAHLS

    Product In stock

    Ref:STH_162776

    Le chariot pour équipement d'impression thermique est une table réglable en hauteur, qui peut supporter jusqu'à 272 kg. Elle est idéale pour la Hotronix Dual Air Fusion IQ™ ainsi que pour d'autres presses à chaud et accessoires de finition textile.

    The worktop can be adjusted to heights between 43 and 89 centimeters. The movable wheels make it possible to move even heavy equipment around the room or to push it to the side.

    Working surface : 95 x 60cm
    Weight of the table : 57Kg

    A delay of one week may apply to this product.

    To know more about it
    EX. VAT : 575,00 € INCL. VAT : 690,00 €

  10. < -2

    in stock

    Stahls press support

    Stahls Maxx, Hotronix Auto Open, Hover press stand

    Product In stock

    Réf.:STH_FOOTCADDIE_125187

    Give yourself more flexibility with the Stahls' press stand! Adapt your heat press for each user. Adjust the height of this stand to your liking or move it at any time with its integrated wheels.

    A wrench is required for assembly. 

    Heat presses must be purchased separately. 

    Fits Stahls' MAXX, Hotronix Auto Open and Hover presses.

    Features:
    - Shipping dimensions: 84 cm (L) x 84 cm (B) x 29 cm (H)
    - Net weight: 27 kg
    - Gross weight: 30 kg

    A delay of one week may apply to this product.

    To know more about it
    EX. VAT : 349,17 € INCL. VAT : 419,00 €

GridView VueListe

Items 1 to 10 out of a total of 20

Page :
  1. 1
  2. 2