Huawei

Are you looking for a trendy and fashionable support to customize? We have the products you need!
There is no need to pre-treat our sublimable objects. All our items are directly sublimable thanks to our Artainium/Sublijet sublimation kits using True pix transfer sheets. Discover the world of object personalization by sublimating your ideas!


GridView VueListe

Items 1 to 10 out of a total of 12

Page :
  1. 1
  2. 2
  1. 51% de remise
    Coque rigide Huawei Y9A à sublimer

    1 Coque Rigide Huawei Y9A

    Product In stock

    Réf.:CQU_HUAWEI_Y9A

    Cette coque est fournie avec une plaque en aluminium sublimable avec une simple presse à chaud (presse à plat).

    Parfaitement adaptée à votre téléphone, la coque épousera parfaitement le Huawei. Cette coque bénéficie d'une surface adhésive sur laquelle la plaque en aluminium est ensuite fixée, offrant une coque totalement personnalisée.

    Pour réaliser tous types de création, pour communiquer ou pour offrir, la coque Huawei est un objet tendance offrant une infinité de possibilités, c'est l'accessoire à avoir !
    Elle ne nécessite pas l'utilisation d'un four à sublimation. 

    Ses points forts:
    Coques fines et adaptées au Huawei Y9A
    Finition glossy pour une coque élégante et raffinée
    Protège des rayures
    Résiste aux chocs et aux rayons du soleil (UV)

    Pour cela, réalisez un pressage durant 45 secondes, à 200° avec une pression moyenne. Avant de lancer une production complète, réalisez toujours quelques essais, de façon à trouver le parfait équilibre entre votre pression, le temps de chauffe et la température.

    Tip Créadhésif : After sublimating your hull, apply some Digicoat UV on the entire surface of the plate to protect the colours of the visual. Your hull will thus have an excellent hold over time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

  2. 51% de remise
    Coque rigide Huawei Y9A à sublimer

    1 Coque Rigide Huawei Y9 2019

    Product In stock

    Réf.:CQU_HUAWEI_Y92019

    Cette coque est fournie avec une plaque en aluminium sublimable avec une simple presse à chaud (presse à plat).

    Parfaitement adaptée à votre téléphone, la coque épousera parfaitement le Huawei. Cette coque bénéficie d'une surface adhésive sur laquelle la plaque en aluminium est ensuite fixée, offrant une coque totalement personnalisée.

    Pour réaliser tous types de création, pour communiquer ou pour offrir, la coque Huawei est un objet tendance offrant une infinité de possibilités, c'est l'accessoire à avoir !
    Elle ne nécessite pas l'utilisation d'un four à sublimation. 

    Ses points forts:
    Coques fines et adaptées au Huawei Y9 2019
    Finition glossy pour une coque élégante et raffinée
    Protège des rayures
    Résiste aux chocs et aux rayons du soleil (UV)

    Pour cela, réalisez un pressage durant 45 secondes, à 200° avec une pression moyenne. Avant de lancer une production complète, réalisez toujours quelques essais, de façon à trouver le parfait équilibre entre votre pression, le temps de chauffe et la température.

    Tip Créadhésif : After sublimating your hull, apply some Digicoat UV on the entire surface of the plate to protect the colours of the visual. Your hull will thus have an excellent hold over time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

  3. 51% de remise
    phone cases Rigid Huawei Y6 2019

    1 Huawei Y6 2019 Hard Case

    Product In stock

    Réf.:CQU_HUAWEI-Y6-2019

    This case is provided with an aluminium plate that can be sublimated with a simple heat press (flat press).
    Perfectly adapted to your phone, the shell will perfectly fit the Huawei. This shell has an adhesive surface on which the aluminium plate is then fixed, offering a totally personalised shell.
    To realize all types of creation, to communicate or to offer, the Huawei case is a trendy object offering an infinity of possibilities, it is the accessory to have!
    It does not require the use of a sublimation oven.

    Its strong points:
    phone cases thin and suitable for Huawei Y6 2019
    Glossy finish for an elegant and refined shell
    Protects against scratches
    Resistant to shocks and sunlight (UV)

    To do this, please press for 45 minutes.To do this, press for 45 seconds at 200° with medium pressure. Before launching a full production run, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature.
    Tip Créadhésif : After sublimating your hull, apply Digicoat UV on the entire surface of the plate to protect the colours of the visual. This will ensure that your hull will last for a long time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

  4. 51% de remise
    phone cases Rigid Huawei P40 Pro

    1 Huawei P40 Pro Hard Case

    Product In stock

    SKU:CQU_HUAWEI-P40-PRO

    This case is provided with an aluminium plate that can be sublimated with a simple heat press (flat press).
    Perfectly adapted to your phone, the shell will perfectly fit the Huawei. This shell has an adhesive surface on which the aluminium plate is then fixed, offering a totally personalised shell.
    To realize all types of creation, to communicate or to offer, the Huawei case is a trendy object offering an infinity of possibilities, it is the accessory to have!
    It does not require the use of a sublimation oven.

    Its strong points:
    phone cases thin and adapted to the Huawei P40 Pro
    Glossy finish for an elegant and refined shell
    Protects against scratches
    Resistant to shocks and sunlight (UV)

    To do this, please press for 45 minutes.To do this, press for 45 seconds at 200° with medium pressure. Before launching a full production run, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature.
    Tip Créadhésif : After sublimating your hull, apply Digicoat UV on the entire surface of the plate to protect the colours of the visual. This will ensure that your hull will last for a long time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

  5. 51% de remise
    phone cases Rigid Huawei P40 Lite

    1 Huawei P40 Lite Hard Case

    Product In stock

    SKU:CQU_HUAWEI-P40-LITE

    This case is provided with an aluminium plate that can be sublimated with a simple heat press (flat press).
    Perfectly adapted to your phone, the shell will perfectly fit the Huawei. This shell has an adhesive surface on which the aluminium plate is then fixed, offering a totally personalised shell.
    To realize all types of creation, to communicate or to offer, the Huawei case is a trendy object offering an infinity of possibilities, it is the accessory to have!
    It does not require the use of a sublimation oven.

    Its strong points:
    phone cases thin and adapted to the Huawei P40 Lite
    Glossy finish for an elegant and refined shell
    Protects against scratches
    Resistant to shocks and sunlight (UV)

    To do this, please press for 45 minutes.To do this, press for 45 seconds at 200° with medium pressure. Before launching a full production run, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature.
    Tip Créadhésif : After sublimating your hull, apply Digicoat UV on the entire surface of the plate to protect the colours of the visual. This will ensure that your hull will last for a long time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

  6. 51% de remise
    phone cases Rigid Huawei P40

    1 Huawei P40 Hard Case

    Product In stock

    SKU:CQU_HUAWEI-P40

    This case is provided with an aluminium plate that can be sublimated with a simple heat press (flat press).
    Perfectly adapted to your phone, the shell will perfectly fit the Huawei. This shell has an adhesive surface on which the aluminium plate is then fixed, offering a totally personalised shell.
    To realize all types of creation, to communicate or to offer, the Huawei case is a trendy object offering an infinity of possibilities, it is the accessory to have!
    It does not require the use of a sublimation oven.

    Its strong points:
    phone cases thin and adapted to the Huawei P40
    Glossy finish for an elegant and refined shell
    Protects against scratches
    Resistant to shocks and sunlight (UV)

    To do this, please press for 45 minutes.Press for 45 seconds at 200° with medium pressure. Before launching a full production run, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature.
    Tip Créadhésif : After sublimating your hull, apply Digicoat UV on the entire surface of the plate to protect the colours of the visual. This will ensure that your hull will last for a long time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

  7. < 3

    in stock

    phone cases Rigid Huawei P30 Pro

    1 Huawei P30 Pro Hard Case

    Out of stock

    SKU:CQU_HUAWEI-P30-PRO

    This case is provided with an aluminium plate that can be sublimated with a simple heat press (flat press).
    Perfectly adapted to your phone, the shell will perfectly fit the Huawei. This shell has an adhesive surface on which the aluminium plate is then fixed, offering a totally personalised shell.
    To realize all types of creation, to communicate or to offer, the Huawei case is a trendy object offering an infinity of possibilities, it is the accessory to have!
    It does not require the use of a sublimation oven.

    Its strong points:
    phone cases thin and adapted to the Huawei P30 Pro
    Glossy finish for an elegant and refined shell
    Protects against scratches
    Resistant to shocks and sunlight (UV)

    To do this, please press for 45 minutes.To do this, press for 45 seconds at 200° with medium pressure. Before launching a full production run, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature.
    Tip Créadhésif : After sublimating your hull, apply Digicoat UV on the entire surface of the plate to protect the colours of the visual. This will ensure that your hull will last for a long time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

  8. 51% de remise
    phone cases Rigid Huawei P30 Lite

    1 phone cases Rigid Huawei P30 Lite

    Out of stock

    SKU:CQU_HUAWEI-P30-LITE

    These phone cases are supplied with a sublimable aluminium plate with a simple heat press (flat press).
    Perfectly adapted to your phone, the hull will perfectly fit the Huawei. This shell benefits from an adhesive surface on which the aluminium plate is then fixed, offering a totally personalised shell.
    To create all types of creations, to communicate or to give as a gift, the Huawei case is a trendy object offering an infinite number of possibilities, it is the accessory to have!
    They do not require the use of a sublimation oven.

    Its strong points:
    phone cases thin and adapted to the Huawei P30 Lite
    Glossy finish for an elegant and refined shell
    Protects from scratches
    Resistant to shocks and sunlight (UV)

    For this purpose, rPress for 45 seconds at 200° with medium pressure. Before starting a complete production, always carry out a few tests to find the perfect balance between pressure, heating time and temperature.
    Tip Créadhésif : After sublimating your hull, apply some Digicoat UV on the entire surface of the plate to protect the colours of the visual. Your hull will thus have an excellent hold over time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

  9. < 4

    in stock

    phone cases Rigid Huawei P30

    1 Huawei P30 Hard Case

    Product In stock

    SKU:CQU_HUAWEI-P30

    This case is provided with an aluminium plate that can be sublimated with a simple heat press (flat press).
    Perfectly adapted to your phone, the shell will perfectly fit the Huawei. This shell has an adhesive surface on which the aluminium plate is then fixed, offering a totally personalised shell.
    To realize all types of creation, to communicate or to offer, the Huawei case is a trendy object offering an infinity of possibilities, it is the accessory to have!
    It does not require the use of a sublimation oven.

    Its strong points:
    phone cases thin and adapted to the Huawei P30
    Glossy finish for an elegant and refined shell
    Protects against scratches
    Resistant to shocks and sunlight (UV)

    To do this, please press for 45 minutes.Press for 45 seconds at 200° with medium pressure. Before launching a full production run, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature.
    Tip Créadhésif : After sublimating your hull, apply Digicoat UV on the entire surface of the plate to protect the colours of the visual. This will ensure that your hull will last for a long time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

  10. 51% de remise
    phone cases Rigid Huawei P20 Pro

    1 Huawei P20 Pro Hard Case

    Product In stock

    SKU:CQU_HUAWEI-P20-PRO

    This case is provided with an aluminium plate that can be sublimated with a simple heat press (flat press).
    Perfectly adapted to your phone, the shell will perfectly fit the Huawei. This shell has an adhesive surface on which the aluminium plate is then fixed, offering a totally personalised shell.
    To realize all types of creation, to communicate or to offer, the Huawei case is a trendy object offering an infinity of possibilities, it is the accessory to have!
    It does not require the use of a sublimation oven.

    Its strong points:
    phone cases thin and adapted to the Huawei P20 Pro
    Glossy finish for an elegant and refined shell
    Protects against scratches
    Resistant to shocks and sunlight (UV)

    To do so, please press for 45 minutes.To do this, press for 45 seconds at 200° with medium pressure. Before launching a full production run, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature.
    Tip Créadhésif : After sublimating your hull, apply Digicoat UV on the entire surface of the plate to protect the colours of the visual. This will ensure that your hull will last for a long time.

    To know more about it

    Normal price : 2,95 €

    Special Price EX. VAT : 1,21 € INCL. VAT : 1,45 €

GridView VueListe

Items 1 to 10 out of a total of 12

Page :
  1. 1
  2. 2