More views

Rodent base for plastisol ink: Ryocharge

Product In stock

EX. VAT : 160,00 € INCL. VAT : 192,00 €

Options

* Mandatory fields

EX. VAT : 160,00 € INCL. VAT : 192,00 €

Imagine the look and feel of a gnawing ink with plastisol. Just add 50% RyoCharge additive with 50% plastisol ink, mix with the activator and you can now print with a hybrid plastisol/rodent ink. RyoCharge additive works very well with all Plastisol inks.

Note, RyoCharge base must be activated with activator for rodent ink

Available in 1 gallon or 5 gallon jars

Application:

1) Mix RyoCharge 50/50 with your Plastisol ink. Stir until a homogenous consistency is obtained for mixing. Do not use high speed mixers that can heat the ink and make it harden in the container.
2) Add 3 to 6% by weight of activating agent to the mixture, and mix until the agent is completely dissolved in the ink.

Once mixed, the ink can be kept for up to 24 hours.

Printing:

Use a squeegee with high hardness. Print wet-on-wet without intermediate drying. The true colour will only appear once the baking process has been completed. On long print runs, when dry, spray the screen with water to improve ink viscosity.

Drying:

Bake for a minimum of 90 seconds at 160°C to activate the gumming agent and obtain good wash resistance. Evaporation of the water too quickly stops the gnawing reaction and can lead to dull colours.

Comments

Write your own review

You're reviewing Ryocharge : Eroding base for plastisol ink : Ryocharge

How would you rate this product? *

Quality
0/5