Produit pour décoller le Flex et le DTF - Décol'Flex & DTF

This product is strictly prohibited in delivery BY PLANE for DOM-TOM and countries abroad. Any material or goods considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints and chemicals).

Start your textile markings with peace of mind!

You made a mistake in the installation of your flex, or in theweeding ? The final result is not up to your expectations ? No need to panic! This Decol'flex will allow you to remove the flex and the flock of any textile in all simplicity.

Instructions for use:

1. Apply a generous amount of Decol'flex on the part of the fabric where the flex is located with a spatula
2. Once you have applied the Decol'flex, remove it by hand or with a weeding tool.
3. Remove the flex with protective gloves
4. After removing the flex, it is best to press the area by covering it with a sheet of paper for 3 seconds at 160°C.

To remove the imprint left on the textile, wash your textile, it will be as new. 

Important: we recommend you to use this product on recent t-shirts, that you have just pressed, following a mistake for example. We cannot guarantee the result on shirts that were flocked several weeks or months ago. Depending on the material, the marks left on the T-shirt can be more or less important. Prefer natural cotton and recent materials for the use of this product.