Glue shredder

Attention : It is possible that polycarbonate or other plastic surfaces (e.g. headlight lenses), synthetic materials such as acrylic, Plexiglas, Perspex, polystyrene as well as varnished surfaces can be damaged by Adhesive Remover Pro, especially if these substrates are old. Cracking may occur. Therefore, we recommend that all users of Adhesive Remover Pro perform a pre-test on a small (preferably hidden) area to verify compatibility. 

The following steps are therefore strongly recommended:

1. A minimum temperature of +10°C is required to use this product. In hot weather (+30°C), work in the shade.
2. Soak a lint-free cloth or a large brush with Adhesive Remover.
3. Properly coat the surface containing adhesive residue with Adhesive Remover Pro. The recommended reaction time/application time varies depending on the thickness of the layer, the composition and the age of the adhesive and is several minutes. AVOID from immediately and vigorously rubbing the adhesive residues as this may scratch the substrate. Give the product time to work on the adhesive.
4. Adhesive residues liquefied and impregnated with Adhesive Remover MUST becompletely removed with a clean cloth. The use of multiple wipesis STRONGLY RECOMMENDED.
5. Adhesive Remover Pro isNOT suitable for substrate preparation prior to film application. After using Adhesive Remover, we recommend a thorough cleaning of the substrate with Surface Cleaner Pro before any new application of self-adhesive film.

The Adhesive Remover is designed so that it does not fall into the category of environmentally hazardous products.