Créez, Osez, Soyez Passionnés !
Digipeel HD Polyester Film for Digital Screen Transfer - 200 sheets - 32x46cm
etait
179,00 €
Prix Spécial
139,00 €
115,83 €
Disponibilité :
En stock
SKU
film-digipeel-hd
Digipeel HD Polyester Film for Digital Screen Transfer - 200 sheets - 32x46cm
You wish to carry out digital screen printing transfer and work on four-colour visuals. For a perfect color reproduction and a reduced cost: Adopt the Digipeel HD.
This 100 micron, cold laminated, matt coated polyester screen transfer film offers excellent dimensional stability and a perfect matt finish suitable for laser printing with Oki, Xerox or Ricoh printers.
After printing your visual with your laser printer, you just have to apply a layer of hot melt screen printing ink (using powder or glue). You can use water-based inks or Plastisol to make the screen printing undercoat.
Dimension: 32 x 46cm
Thickness: 100 microns
Quantity: 200 sheets
Carrying out the transfer :
Step 1. Print your mirrored visual using your laser printer on our Digipeel HD transfer film. There is no need to dry the film after printing.
Step2. Print an undercoat of white, leaving an extra 0.5mm margin over the intended print size. Apply the powder and run your paper over it to remove the excess powder.
Step3 . Run the paper through the drying tunnel at 130 degrees for 30 seconds and then protect your paper while waiting for printing to prevent dirt from sticking to your paper.
Pressing on textile :
- Water-based inks: Hot press 130 - 160 degrees for 6 - 12 seconds with low pressure. Coat your coat cold or warm .
- Plastisol inks: Press hot 100 - 130 degrees for 6 to 12 seconds with medium pressure. Coat your coat cold or warm.
Write your own review
