With a thickness of 235 microns, the Twinkle flex is THE glitter flex with a smooth feel! The glitter is embedded directly into the flex for a very smooth finish. When exposed to sunlight, the effect is intensely shiny and reflective. Easy to cut and weave, it can be pressed in 15 seconds at 150°C.
It can be applied to cotton, polyester and poly/cotton textiles with a heat press or a simple iron. Please note that it cannot be applied on treated, dyed or already sublimated textiles.
Tip Créadhésif : Before starting a production, always remember to carry out a test to find the right balance between pressure, time and heating temperature.
Layering Tip: You cannot layer another flex over the Flex Twinkle but it can be layered over other thin flexes.
( Les pastilles de couleurs que vous voyez sur votre écran sont en RVB et peuvent différer d’un écran à l’autre en fonction de leur calibrage. Pour visualiser les couleurs réelles, nous vous conseillons donc de vous appuyer sur les nuanciers que nous proposons en cliquant ICI )
Application tips:
1) Cut the flex in mirror mode (recommended blade: 45°)
2) Trim the excess material.
3) Place your flex on your textile.
4) Press the marking on the textile by protecting it with a teflon paper at 150°C - 15 seconds - medium pressure.
5) Peel off the fabric when cold.
Precautions for use :
- Respect the instructions specified on the garment.
- After pressing, wait 24 hours before the first washing.
- Washing : 40°C max. inside out, do not use aggressive products (bleach...).
- Tumble dry: yes (delicate cycle)
- Ironing: inside out
| Manufacturer | Siser |
|---|---|
| Documents |