Flex Printable Laser'Print Stretch -

The Laser'Print Stretch is a printable flex consisting of a highly elastic and non-adhesive printable film. You will thus obtain an easy, fast and ultra-softweeding . Sold in A4 or A3 format, with a thickness of 60 microns, it is compatible with the majority of colour laser printers. We recommend OKI printers for best results.
It is ideal for heart markings and open graphics. Easy to use, it will allow you to propose professional quality creations without being limited by the colors or the fineness of details related to the visual. It can only be used on light-coloured textiles. Its transparent support will allow you to position the motif precisely on your support. No tape is required to use this printable flex. 

Laser'Print Stretch can be used on cotton, polyester, poly/cotton blends, and nylon (subject to testing). It is resistant to machine washing up to 60°C and does not crease.In an ecological approach, it is made from an aqueous base without the use of solvents or PVC. Moreover, it is made only from European raw materials, which reduces its carbon footprint.

Its + Products:
- Its transparent support allows precise positioning of the product on the fabric.
- Fast and easy to use: print all your texts and photos available from your computer directly to your colour laser printer.
- Easy to store: It is sold in batches of 10, 50 or 100 sheets in A4 or A3 format.
- Possibility of precise trimming using a cutting plotter
- Can be applied to most textiles
- Film Elastic and resistant, does not crease after washing.
- Environmentally friendly: water-based, solvent-free, PVC-free
- No transfer film required
- Can be applied to white or light-coloured textiles
- Better wash fastness: can be washed up to 30 times at 60°.

Tip Créadhésif : We advise you to always pre-press your garment alone for 2 to 3 seconds to remove any wrinkles and moisture before positioning your visual to be transferred. On an automatic press, adjust the pressure to 5 bar, on a manual press, use the maximum pressure.

Please note: We do not recommend the use of this printable flex for small letterings or graphics with very fine details because if a detail comes off, it will not be possible to reattach it to the liner or the substrate. We also advise against the use of OKI C834, OKI C844 DN printers. A list of recommended printers is indicated in the "characteristics" tab.