More views

Papier Multi-Trans Pro Format A3

Product In stock

EX. VAT : 154,17 € INCL. VAT : 185,00 €

The Multi-Trans PRO paper can be used on any type of laser printer. With this paper, you can easily personalize hard surfaces such as wood, paper, cardboard, cork and much more.


With a very short press time at low temperature, you can heat peel your Multi-Trans PRO, making it one of the most efficient products on the laser transfer market. Produce an infinite variety of media for all types of events, weddings, restaurant or interior decoration, festivals ...


This paper is applicable on Wood, Paper, Card, Metal, Mirrors, Glass, Leather, Cork


Applications: Cups , Paper bags, Wooden products, Coasters, Towels, Face masks (1 use), Plastic cups (PP), Book covers;...


1 pack = 100 sheets


Steps for use : 


1. Pre-press your product with the settings in the table below.
2. Place your design on your substrate/product (printed side down) and if necessary,
secure it with high temperature tape.
3. Press your transfer with the settings shown below and cover it with the
silicone pads in the table below.
4. Peel off the transfer paper using the recommended settings in the table below.
CAUTION: At this point, the media is very hot. Take care when handling it.
5. If indicated in the table below, press your product again at the same temperature as in step 3 for approximately 2 to 5 seconds.


Comments

Write your own review

Vous commentez : Papier Multi-Trans Pro Format A3

How would you rate this product? *

Quality
0/5