FLEX SOFT NO CUT - 1 Colour 100 Sheets

1 Avis Ajoutez votre commentaire

À partir de 109,00 € 90,83 € etait 120,00 €

Disponibilité : En stock

Plus que %1 en stock

SKU

FLEX-SOFT_A+B

Color

Format

Qté:

With this new product, no moreweeding !

This paper is compatible with black and white LED or CMYK printers or copiers. With a simple desktop printer by printing in black you can obtain visuals in white, colour, metallic or fluorescent. So you don't need a white toner printer or cutting plotter.
This transfer is composed of 2 sheets: sheet A is the one you are going to print and sheet B is going to be superimposed on it. You just have to press the 2 sheets together in order to deposit the coating on the transfer paper.
Then you have to separate the 2 sheets delicately and the glue of sheet B is transferred on the visual of sheet A. All you have to do now is to press your visual on your T-shirt.
It's easy to do: just wash your shirt inside out at 40°C.

This pack contains :
1 x 100 B-Paper sheets (Low Temp)
1 x 100 Flex Soft (no cut) sheets in the colour of your choice

If you're not sure which colour to choose, you can order the sample pack. BASIC 7 FLEX-Soft No-Cut or PREMIUM 17 FLEX-Soft No-cut (A4 size)

The + product is that the transfer is possible on many supports (cotton, mixed textile, polyester, nylon, polypropylene, paper, wood).
Tip Créadhésif :choose a print with a flatbed, choose the "multifunction tray". Otherwise your paper may be scratched and damaged by the passage through the printer.

Details

This product contains 2 sheets :
A FOIL. This sheet allows you to print your visual
B FOIL. This sheet is used to deposit the glue on sheet A

Instructions for use :

1) Print your visual in mirror on paper A.
Position a sheet of paper, then place on your paper A, the sheet of paper B, place the whole on your heat press. Be careful not to cover with a sheet of Teflon. Cover with a second sheet of paper.

2) Press for 90 sec. for an A4 format and 120s. for an A3 format.
Then set the temperature to 130°-135°C (color) to 140°C (white).
Finally, exert a pressure of approx. 3-4 bar (medium pressure).

3) Separate the still hot paper A and paper B in a smooth and steady motion (without clutches) on the hot lower platen of your press.
Then vou may want to wipe the paper with a cloth, as it can be very hot. However, thehe glue of the B-paper must remain on the coloured sheet.

4) Place paper A on your support and a teflon sheet or parchment paper, then press for 30 seconds at 130-135°C or 140°C (adjust these parameters according to the type of media). Medium to high pressure.

5) Allow to cool, then peel off the coloured sheet. Your product is ready.