More views

DTF Black Transfer Powder - 1kg

Product In stock

EX. VAT : 29,08 € INCL. VAT : 34,90 €

Discover our DTF transfer powder!


You can use our powder with all DTF printers using DTF transfer inks and films. It is a thermoplastic polyurethane (TPU) hot melt adhesive powder specially formulated for DTF.


The black powder is particularly used for application on black textiles. This allows you to avoid any excess powder on your textile during the transfer.

How to use hot melt powder?

DTF transfer is made with DTF transfer films and DTF transfer powder.
First, print from your DTF or DTG printer with textile ink or DTF ink on sheets or rolls of DTF film.
ollow your print with DTF transfer powder.
t remains to dry the powder at 120°C for 90 seconds. For the transfer drying step, you can use a heat press, a screen printing tunnel, an intermediate screen printing dryer, an oven or a conventional oven.
All that remains is to apply your transfer to your textile at 150°C for 8 to 10 seconds with a cold peel.


You can:
- For your white or light textiles: print only your colours
- For your dark textiles: you must print an under layer of white then your colours


What is the advantage of DTF (Direct to Film)?


DTF allows transfers on both light and dark textiles thanks to the white inks applied as an undercoat.
DTF gives an airy, smooth-touch and more stretchy transfer.
DTF does not require the image to be cut out of the transfer.
DTF allows for vivid colours.


The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.


The powder can be stored in a dry place for 2 years. It gives your transfer an excellent resistance to washing (up to 90°C).

Comments

Write your own review

You're reviewing : DTF Black Transfer Powder - 1kg

How would you rate this product? *

Quality
0/5