Créez, Osez, Soyez Passionnés !
Retro-reflective 3M Retro-reflective Vinyl Flexible 580
91,30 €
76,08 €
Disponibilité :
Expédié sous 2 à 3 jours
SKU
SPX_3M Vinyle rétro-réfléchissant Flexible 580
Retroreflective cast film for vehicle marking - permanent - 180µm
This 3M™ Scotchlite™ 580E film is ideally suited for fleet retro-reflective marking applications where visibility is needed both day and night (same appearance) and even at side viewing angles.
This coating is ideally suited for applications on corrugated or riveted, flat or curved surfaces and for use in cold climates.
With a permanent adhesive, this product cannot be removed by heat alone.
3M™ Scotchlite™ 580E films with a permanent gray adhesive are as flexible as they are durable. The surface is covered with millions of tiny glass beads that catch the light and reflect it. These reflections ensure maximum visibility of your messages and are sure to engage the public, day or night. This visibility also contributes to increased road safety.
Available colours : Bright white - Bright orange - Gold - Bright yellow - Bright red - Bright blue - Bright light blue - Bright green - Lemon yellow - Bright ruby red - Black
Width: 1220 cm
Available lengths: from 1 m
Pour tous les vinyles un délai de livraison de 48h supplémentaire est appliqué. Les rouleaux étant commandés à la demande aucune reprise de marchandise ne sera accepté.
Type of application
| Application | Signs Vehicle markings Trucks Security Public transport |
| Use | Exterior |
Adhesive and Liner
| Adhesive | Acrylic, permanent, pressure-activated |
| Composition of the adhesive | Solvent-based acrylics |
| Adhesive colour | Transparent |
| Bond strength | 19 N/25mm |
| Type of adhesive | Pressure sensitive |
| Removability | Permanent |
| Type of liner | Paper with PE coating on both sides |
| Liner colour | White |
Temperature resistance
| Minimum temperature resistance | -34 °C |
| Maximum temperature resistance | 95 °C |
Application specifications
| Surface | Flat surfaces Smooth and non-textured surfaces Rivets |
Dimensions
| Thickness | 180 µm |
Product storage
| Storage time | 2 years from the date of manufacture indicated on the original packaging. Up to 1 year after treatment. |
| Storage and transport conditions | Between 4°C and 40°C, away from direct sunlight, in the original packaging in a clean and dry place. |
Application temperature
| Minimum application temperature | 15 °C |
Sustainability
| Sustainability | 6 years old |
Type of surface
| Type of surface | Smooth and untextured surface Flat surfaces |
Type of product
| Type of product | Cast |
Additional information
CAUTION:
Equipped with a permanent adhesive, this product cannot be simply removed with heat.
For reusable graphics or low temperature application, we recommend the 3M™ 680CR E series.
The 580E series is characterized by an approval number, which appears as an optical watermark every 10 cm, it can be seen perpendicularly to the applied surface.
Entry angle 5°
Observation angle: 0.33
Application temperature:
- on flat surfaces without rivets: 13°C to 38°C
- on corrugated surfaces: 16°C to 38°C
IMPORTANT: Follow 3M's instructions for use!
| Expédition | Ships within 2 to 3 days |
|---|
Write your own review
