Créez, Osez, Soyez Passionnés !
Tête de remplacement Epson 4720 pour imprimante DTF et carte encodeur
1 249,00 €
1 040,83 €
Disponibilité :
En stock
Plus que 2 en stock
SKU
ZHS_TETE_4720
Epson 4720 replacement head for DTF large format printer
If you notice a loss of print quality, it may be a sign that your print head needs to be replaced. Unfortunately, it may also be a sign that your print head needs to be cleaned. How do you know what is needed?
It's simple: clean the print head first. Your printing system might just be clogged and need a good deep cleaning. Try using the printer's utilities first, such as nozzle cleaning, head alignment. Run one or two cleaning cycles to remove any dried ink. If you have done this and still see no improvement, the next step is to perform a manual head cleaning. These two steps should solve most print head problems, but if not, it's probably time to replace your print head.
CET ARTICLE NE PEUT ETRE REPRIS NI ECHANGE - NON SOUMIS À GARANTIE
- Tête d'impression Epson 4720
- Type d'encre : encre aqueuse
- Nombre de buses : 3220
- Largeur x profondeur x hauteur : 69,1 x 59,4 x 35,6mm
- Poids : 82g
- Emballage d'origine Epson
- Pays d'origine : Japon
With the unique micro piezoelectric printing technology to control the deformation of the piezoelectric crystal, allows precise control of the size of the ink droplets, and ensures excellent printing accuracy. The smallest ink droplets can be as small as 3.5 pl. In the inkjet process, the print head does not need a heating process, so the chemical composition of the ink does not change, so the single nozzle can maintain high frequency stability during operation. The ejection frequency of the micro piezo nozzle is higher than that of the thermal foam nozzle. The frequency is high, which directly increases the overall printing speed.
Write your own review
