2.5 Kg of screen printing transfer powder - 80 to 200 microns

2.5Kg transfer powder - 80 to 200microns

This transfer powder is to be applied on your screen printing transfer. After firing your transfer at 100°C for 1min30-2min, the powder will melt into the ink. Finally, during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.

1/ Make these frames with a mirror image
2/ print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
3/ Once all the colours are superimposed, sprinkle the powder and remove the excess powder.
4/ Bake your transfer at 100°C for 1min30-2minutes - Your transfer is ready!

The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.

The powder can be stored in a dry place for 2 years.

This powder gives your transfer an excellent resistance to washing (up to 90°C).