More views

2.5 Kg of fine screen printing transfer powder - 0 to 80 microns

Product In stock

EX. VAT : 71,50 € INCL. VAT : 85,80 €

2,5Kg of transfer powder - 0 to 80 microns


This transfer powder is used for the realization of your screen printing transfers. The fine powder is used directly mixed with your ink in a proportion of 10 to 15% depending on the viscosity of your ink.


After firing your transfer at 100°C for 1min30 - 2min, the powder will melt in the ink. Finally during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.


1/ Make these frames with a mirror image
2/ Print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
3/ Once all the colours are superimposed, apply the last layer of ink containing the powder.
4/ Bake your transfer at 100°C for 1min30 - 2minutes - Your transfer is ready!


This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.


The powder can be stored in a dry place for up to 2 years. 


This powder gives your transfer an excellent resistance to washing (up to 90°C).


Tip Créadhésif : press your transfer at 160°C-180°C for 10 to 15 seconds. Peeling is done cold.


 

Comments

Write your own review

You're reviewing : 2,5 Kg of fine screen printing transfer powder - 0 to 80 microns

How would you rate this product? *

Quality
0/5