Créez, Osez, Soyez Passionnés !
Transparent Plastisol glue for screen printing transfer: ready to use
27,90 €
23,25 €
Disponibilité :
En stock
SKU
AM122124
Colle Plastisol transparente pour transfert sérigraphique : prêt à l'emploi
Cette colle s'utilise sur du papier siliconé. Elle est idéale pour la réalisation de transfert sérigraphique en vue d'une pose sur textile clair.
Caractéristiques:
Colle pour préparation pour feuilles de transfert (silicone) et feuilles de finition Flock
Bonne élasticité et flexibilité
Sans phtalates
Haute élasticité et flexibilité
Bonne résistance au lavage
Preparation:
Ready-to-use adhesive. It is necessary to mix the ink well before use.
We recommend the use of Amex SCREEN SOL QT BLU as a light emulsion.
Application:
It is necessary to print on a screen of maximum 34 wires/cm. We recommend that you apply the glue a few tenths of a millimetre beyond the perimeter of your visual.
Drying:
The transfer is dried at 120 to 130°C for a maximum of 60 to 90 seconds.
It is important to check the drying temperature carefully in order to obtain complete curing of the ink.
Conversely, a temperature that is too high or a drying time that is too long will alter the properties of the adhesive.
Application of the transfer:
170/180 °C for 12-15 seconds. Pressure: high 4 bar
For a successful transfer, peel off cold.
Cleaning :
Wash tools with Solvent.
This transparent plastisol glue can also be used with flock finishing sheets.
In the case of multi-colour screen printing transfer boards, you must first apply your plastisol inks one after the other, proceed to dry between each colour (120°C-130°C for 60 to 90 seconds), you can possibly add a support white, then finish by applying your layer of white adhesive glue (120-130°C for 60 to 90 seconds).
Your screen for applying the glue should be slightly larger than your visual.
To improve the elasticity and mechanical strength of your transfer, you can apply a first layer of transparent ink.
Finally, to further improve the durability of your transfer, you can add hot melt powder.
Write your own review
