Flex Printable Phosphorescent Glow in the dark - 50 cm x 25 m

Soyez le premier à commenter ce produit

289,00 € 240,83 €

Disponibilité : En stock

SKU

STH_PHOSPHO_CADCOLOR

Ideal to shine in the evening, in a nightclub, in concert... This printable flex will allow you to create professional designs with a soft touch and a phosphorescent effect!
This flex has indeed the particularity to "glow" in the dark after exposure to light. The film stores the light and releases it in the night or in the dark.

Printable film for solvent and eco-solvent printers in polyurethane.

Advantages:
- Resistant
- Requires transfer film.

We recommend using it on 100% polyester, 100% non-shrinking cotton and mixed fabrics (polyester/cotton).

Characteristics:
Roll size: 25 m x 50 cm
Fine material: 160 microns
Price per m² : 19,26 €/m².

Tip Créadhésif: Be sure to do some cutting tests beforehand to determine which blade will be the best fit.

Details

Precautions of use:

Follow the instructions on the garment.
After pressing, wait 24 hours before the first wash.
Wash 40°C max. inside out, do not use aggressive products (bleach...).
Dry cleaning: no
Ironing: inside out
Coil storage: max. one year, vertically, in a dry place, 15-25°C, protected from light.

Application advice:

1) Printing and cutting
- Prepare the printout of the pattern in positive by following the operating instructions of the printer (no mirror printing!). Check the printing and drying temperatures of the inks. Then use the appropriate print profile (e.g. on Roland, select Colorip or Versawork, then the TTRH profile, textile).
- Cut immediately after printing your design.

2) Hot Transfer
- Peel off excess material.
- Apply the taped application to your design, making sure that all air bubbles are removed. Remove the carrier film, revealing the adhesive side.
- Pre-press your garment for 3 to 5 seconds at 150°C to remove any wrinkles or moisture.
- Position and press the pattern on the textile (previously protected by a silicon paper) at 150°C - 10 seconds - medium pressure.
- If you have used a taped application, peel it off while hot.