Créez, Osez, Soyez Passionnés !
Flex Printable SuperTek Sublistop - 50 cm x 25 m
239,50 €
199,58 €
Disponibilité :
En stock
SKU
STH_SUPERTEK_SUBLISTOP
Printable film for solvent and eco-solvent printer made of polyurethane.
Sublistop printable flex offers a protective sublimation barrier: the colour of your garment will not alter the colours of your design!
It is also very elastic, thin and quick to apply and will enhance your creations. Equipped with the unique StiX² technology, it adheres to all types of fabrics. You will be able to realize your designs on many supports, cotton, polyester, elastane, nylon...
However, be careful with nylon materials on which it is essential to carry out tests. The characteristics of nylon may vary according to its colour, finish etc...
Characteristics :
- Protective sublimation barrier
- Matt finish
- End
- Easy to scale
- Adheres to a large number of tissues
- Requires transfer film
We recommend using it on 100% cotton, 100% polyester, mixed fabrics (polyester/cotton), lycra/elastane, most nylons and similar materials.
Roll size: 25 m x 50 cm
Fine material: 105 microns
Price per m² : 15,96 €/m².
Tip Créadhésif : Be sure to do some cutting tests beforehand to determine which blade will be the best fit.
Application tips:
1) Printing and cutting
- Prepare to print the design in positive by following the printer's operating instructions (no mirror printing!) Check the printing and drying temperatures of the inks. Use the correct print profile (e.g. on Roland, select Colorip or Versawork, then TTRH, textile profile).
- Cut immediately after printing your design.
2) Heat transfer
- Trim off excess material.
- Place the tape application on your design, making sure to remove all air bubbles. Remove the carrier film revealing the adhesive side.
- Pre-press your garment for 3 to 5 seconds at 150°C to remove any wrinkles or moisture.
- Position and press the pattern on the textile (protected by a teflon sheet) at 150°C - 5 seconds - medium pressure.
- Peel while hot.
- Press again for 5 seconds.
Precautions for use :
Respect the instructions specified on the garment.
After pressing, wait 24 hours before the first washing.
Wash at 40°C max. inside out, do not use aggressive products (bleach...).
Dry clean : no
Ironing : inside out
Storage of the roll: max. one year, upright, in a dry place, 15-25°C, protected from light.
Write your own review
