Flex Printable Stahls Premium - 50 cm x 25 m

2 Avis Ajoutez votre commentaire

199,50 € 166,25 €

Disponibilité : En stock

SKU

STH_PREMIUM_CADCOLOR

Printable film for solvent and eco-solvent printer made of polyurethane.

This very thin, light matt printable flex with a matt finish can be used to sublimate both light and dark garments.

The Premium CAD Color flex is very elastic and soft and will enhance your most beautiful creations. Equipped with the unique StiX² technology, it adheres to all types of fabrics. You will be able to realize your designs on many supports, cotton, polyester, elastane, nylon... However, be careful with nylon materials on which it is essential to make tests. The characteristics of nylon may vary according to its colour, finish etc...

This opaque printable flex will enhance your most beautiful creations... Don't hesitate any longer!

Characteristics :
- Matt finish
- Very fine
- Extensible
- Easy to cut
- Easy to scale
- Adheres to a large number of tissues
- Requires transfer film

We recommend using it on 100% cotton, 100% polyester, mixed fabrics (polyester/cotton), lycra/elastane, most nylons and similar materials.

Roll size: 25 m x 50 cm
Material: 50 microns
Price per m² : 13,30 €/m².

Tip Créadhésif : Be sure to do some cutting tests beforehand to determine which blade will be the best fit.

Details

Application tips:

1) Printing and cutting

- Prepare to print the pattern in positive by following the operating instructions of the printer (no mirror printing!) Check the printing and drying temperatures of the inks. Use the correct print profile (e.g. on Roland, select Colorip or Versawork, then the TTRH profile, textile).
- Cut your design immediately after printing.

2) Hot transfer

- Scale off the excess material.
- Apply the tap application to your design, making sure that all air bubbles are removed. Remove the carrier film, revealing the adhesive side.
- Pre-press your garment for 3 to 5 seconds at 150°C to remove any wrinkles or moisture.
- Position and press the pattern on the textile (previously protected by a teflon sheet) at 150°C - 5 seconds - medium pressure.
- Peel when hot.
- Press again for 5 seconds.

Precautions for use:

Follow the instructions specified on the garment.
After pressing, wait 24 hours before the first wash.
Wash 40°C max. inside out, do not use aggressive products (bleach...).
Dry cleaning : no
Ironing: inside out
Coil storage: max. one year, vertically, in a dry place, 15-25°C, protected from light.