Liberty Subli for Virtuoso Sublijet

Évaluation:

60 % of 100

10 Avis Ajoutez votre commentaire

23,90 € 19,92 €

Disponibilité : En stock

SKU

CFP_S701A

Do you want to customise all kinds of colours and materials with a simple printer? The Flex Liberty Subli is the product for you!

D'une épaisseur de 130 microns, ce papier fait office de flex imprimable et s'utilise à la fois avec des imprimantes jet d'encre mais également les imprimantes de sublimation polyester (encres Sublijet) sur textiles clairs et foncés en coton, polyester, élasthane ou nylon.

Ce papier vous permettra d'obtenir un résultat professionnel et notamment sur tous vos textiles foncés qui ne peuvent pas etre personnalisés avec un simple papier Truepix. Le résultat obtenu est bluffant ! Toucher très doux, fin et élastique, avec des couleurs profondes et vibrantes.

Simple à découper et à écheniller, il vous permettra de mettre en valeur toutes vos créations. Vous pouvez manipuler le papier à la main pour les formes simple. Toutefois, il est recommandé d'utiliser un tape de transfert pour le transfert des lettrages et visuels fins.

Very resistant, you can wash it at 30°C, preferably in a short cycle. It is long lasting, up to 40 washes. We recommend that you wash your fabric inside out, and not to use a tumble dryer.

Its Advantages:
- A universal iron-on which allows it to be used on all textiles
- A layer of top coat which allows compatibility with different types of inks
- A low temperature pressing gives it a use on all textiles, including fragile textiles
- A layer of adhesive polyester (liner) which allows to highlight fine details

The Green Product Plus: composed of water-based polyurethane, this innovative printable flex does not release any solvent-based products into the atmosphere but only water. This 100% French product is environmentally friendly and therefore not harmful.

Astuce Créadhésif : si vous utilisez une imprimante Sawgrass, sélectionnez papier "Type A" et support "Polyester" dans le logiciel SPM. Laissez reposer votre impression 5 minutes avant d'effectuer le pressage.

Details

Pressing conditions: 15 seconds at 140°C

Creation steps:
1. Create your visual or import your photo (without specific rip)
2. Print your visual without activating the mirror mode (your visual must be facing you at the time of pressing) using a polyester sublimation printer or an inkjet printer (NB: print with the marks if you wish to make a cut with a plotter). Wait 5 minutes after printing, then cut and press as the ink dries quickly.
3. Cut out your design using a plotter or a simple pair of scissors.
4. Proceed toweeding.
5. Peel your design off the adhesive polyester backing by hand. For pre-spaced shapes (lettering), use a transfer tape (wait 10 minutes before applying the tape).
6. Place your substrate and design on the press. The transfer takes place quickly and at a low temperature: 15 seconds at 140 degrees, depending on your heat press. If you are using a black polyester t-shirt, 5 seconds of pressing is enough.
7. If you had to use a transfer tape, peel it off cold.
And you're done!

Washing instructions:

Wash at 30°C
Wait 24 hours before the first wash
Wash separately
Do not use aggressive detergents
Iron on reverse side

Plus d’information

Plus d’information
Features	Print settings SAWGRASS Substrate: polyester or HTV Paper: Type A Quality : High quality EPSON SC-F100 Paper : DS transfer multi use/textile Quality: high Reduce the density to -30% by going to "Maintenance" > "Print density".