DTF Powdering and Drying Machine

The DTF printing technique consists of 3 steps: printing on a film, depositing the hot melt powder and and drying. Our dryers with drying tunnel will allow you to automate the last two steps for roll-to-roll printing. The powder is deposited evenly on your film and a collector allows the powder to be collected for reuse. This will drastically reduce powder wastage and save valuable production time.

GridView VueListe

Articles 11 to 16 out of a total of 16

Page :
  1. 1
  2. 2
  1. < 3

    in stock

    Poudreuse 60 cm pour imprimante DTF

    Nouveauté ! Poudreuse 60 cm Compact - Pour imprimante DTF 2 têtes

    Product In stock

    Réf.:ZHS_ZH6503

    Découvrez l'une de nos dernières nouveautés : la poudreuse compacte dédiée à l'impression DTF (Direct To Film) !

    Recommandée pour les imprimantes DTF 2 têtes, cette poudreuse prendra moins de place dans votre atelier sans réduire votre efficacité. D'une largeur de 60cm, vous pourrez toujours réaliser de grands formats d'impression.

    Cette machine vous permettra de déposer de la poudre de manière uniforme et sans vide sur votre film. Le réservoir et le dépôt de poudre ont été optimisé afin de réduire le nombre de rechargement en poudre.

    Le travail de l'opérateur est d'autant plus facilité grâce à l'écran de contrôle désormais tactile et en couleur ! Plus simple d'utilisation, cette poudreuse vous permettra de réaliser des marquages de qualité, dans un espace plus aéré et à moindre frais !

    Les avantages produit :
    - Consommation électrique réduite
    - Gain de place grâce à sa forme compacte
    - Optimisation de la recharge de poudre
    - Compatible avec tous les types de poudre
    - Pas de gaspillage grâce au collecteur de poudre

    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés.

    To know more about it
    EX. VAT : 5 233,33 € INCL. VAT : 6 280,00 €

    Delivered within 1 to 3 days

  2. DTF MyColor A3 - 30 cm

    Product In stock

    SKU:ADL_MYC_POUD_30CM

    Need a powder and drying solution in 30 cm for your DTF prints? Opt for our DTF My Color A3 powder machine!

    This powder applicator will allow you to apply powder evenly and without gaps on your film. With a width of up to 30cm, it is suitable for A3 and A4 formats. It is also equipped with a table for the installation of the printer and the roll holder.

    the 30 cm drying tunnel is integrated directly after the powder machine. This is an all-in-one solution to get started with DTF customization.

    Advantages of the My Color powder machines:
    -
    Cooling system included in the powder machine
    - No waste thanks to the powder collector
    - Quality finish
    - Works with all DTF 30 cm printers
    The + Product:
    - Not very bulky
    - Equipped with wheels for easy movement

    Dimension of the box: 120 x 71 x 88cm
    Dimension of the powder box (once mounted): 100 x 60 x 75cm

    Weight of the box : 110Kg
    Weight of the machine : 90Kg

    Power supply: 220V - 13A
    Consumption: 1KW - 2.3KW

    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés.

    To know more about it
    EX. VAT : 1 658,33 € INCL. VAT : 1 990,00 €

  3. heat press Stahls Sprint Mag Hover Special DTG/DTF 40x50

    Product In stock

    SKU:STH_HOVER_STX20*

    Discover the heat press Sprint Mag Hover Special DTG and DTF!

    This press has been specially designed for these personalization techniques. Indeed, you can set 2 pressing modes to close the press. Use the standard mode (with contact) to press your graphics and personalize your textiles and the second mode (without contact) to dry your DTF graphics. This mode allows you to not close the press completely and leave a gap of about 1 centimeter, a perfect option if you do not have a DTF drying oven.

    The double timer, magnetic closure andautomatic opening will allow you to work more efficiently and save time during your large productions.

    The pressure is shown on the digital display for accuracy. The number indicated corresponds to a Stahls scale between 0 and 9 where 4 - 5 corresponds to an average pressure. The pressure is easily adjusted by means of the crank located above the top plate.

    The lower tray supplied is 40 x 50 cm but can be changed with up to ten other compatible trays.

    The heating element is guaranteed for 30 years.

    A delay of one week can be applied to this product.

    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés.

    To know more about it
    EX. VAT : 1 840,00 € INCL. VAT : 2 208,00 €

  4. DTF 60 CM oven with drawer

    Out of stock

    Réf.:ZHS_A380-60CM-ADAPTATEUR

    This drying oven is ideal for drying your large format DTF transfers, an essential step before heat transfer onto the textile. More precise and professional than the use of a heat press, this oven is specially designed for intermediate productions. A simple and economical solution for your DTF transfers! 

    This oven has a warming tray with a drawer so you can safely put in and take out your visuals.

    The + Product: 6 heating tubes for a drying and a homogeneous cooking of your visuals.

    Comes with a cleaning brush, adapter and user manual.

    To know more about it
    EX. VAT : 582,50 € INCL. VAT : 699,00 €

  5. Tuyau d'extraction pour four DTF et extracteur Haute température - Diamètre 50mm

    Product In stock

    Réf.:Tuyau PU 50mm

     Tuyau en Polyuréthane pour l'Extraction des Fumées de Four DTF - Diamétre intérieur 50mm - Résistant au haute température

    Ce tuyau en Polyuréthane PU est le choix idéal pour assurer la liaison entre votre four DTF et votre extracteur de fumée. Il vous offrira une extraction des fumées fiable et sécurisée sans risque de percement, et une durabilité exceptionnelle face aux conditions d'utilisation de votre four DTF.

    Doté d'une paroi en polyuréthane pure et résistante de 0,7 mm d'épaisseur, ce tuyau encapsule une armature en acier à ressort.

    Caractéristiques :
    - Ultra-léger et extrêmement flexible, offrant une maniabilité optimale.
    - Sans halogène ni plastifiant, respectueux de l'environnement.
    - Résistant à l'abrasion, grâce à sa paroi en polyuréthane robuste.
    - Antistatique grâce à la liaison du fil métallique renforcé.
    - Résistant aux fumées DTF

    Longueur Standard : Disponible en longueurs de 5 ou 10 mètres, dans une variété de diamètres pour répondre à vos besoins spécifiques.

    Plage de Température : Fonctionne de manière fiable dans des conditions allant de -20°C à +120°C, avec une température ambiante de 20°C.
    Ce tuyau en Polyuréthane PU offre une solution de qualité supérieure pour l'extraction des fumées émanant de votre four DTF.

    To know more about it
    EX. VAT : 104,17 € INCL. VAT : 125,00 €

  6. < -7

    in stock

    DTF A3 drawer oven

    DTF A3 drawer oven

    Product In stock

    SKU:ZHS_DTF_A280

    This drying oven will allow you to dry your DTF transfers to A3 size, an essential step before heat transferring onto the textile. More precise and professional than using a heat press, this oven is ideal for small productions and sheet-fed printers. A simple and economical solution for your DTF transfers!

    The + Product : This oven has a warming tray with a drawer to allow you to safely put on and remove your visuals.

    Fourni avec un pinceau de nettoyage et un manuel d'utilisation en anglais.

    To know more about it
    EX. VAT : 415,83 € INCL. VAT : 499,00 €

GridView VueListe

Articles 11 to 16 out of a total of 16

Page :
  1. 1
  2. 2