DTF Printheads and Accessories

Discover all the accessories to make your markings in DTF but also to maintain your material. You will find Teflon sheets for your pressings but also a set of tools for maintenance: sticks and cleaning solutions. We also offer replacement parts in case of wear and tear of your equipment and in particular dampers and print heads. With this section, you will be ready to succeed in all your marking projects!

Find many explanations, tips and tricks via our video tutorials on our channel YouTube : Créadhésif ! You can also subscribe to our various Free online training (Webinar). Register now in the Support section of our website.

GridView VueListe

5 article(s)

  1. Epson i3200 replacement head for DTF printer

    Product In stock

    Reference:ADL_I3200-A1

    Epson i3200 replacement head for DTF large format printer

    If you notice a loss of print quality, it may be a sign that your print head needs to be replaced. Unfortunately, it may also be a sign that your print head needs to be cleaned. How do you know what is needed?

    It's simple: clean the print head first. Your printing system might just be clogged and need a good deep cleaning. Try using the printer's utilities first, such as nozzle cleaning, head alignment. Run one or two cleaning cycles to remove any dried ink. If you have done this and still see no improvement, the next step is to perform a manual head cleaning. These two steps should solve most print head problems, but if not, it's probably time to replace your print head.

    CET ARTICLE NE PEUT ETRE REPRIS NI ECHANGE - NON SOUMIS À GARANTIE

    To know more about it
    EX. VAT : 999,17 € INCL. VAT : 1 199,00 €

  2. Ink damper for i3200 white print head

    Product In stock

    SKU:ADL_DAMP_I3200_WHITE
    Ink damper for Epson i3200 white print head With DTF inks, it is necessary to clean your printer regularly. But, despite regular maintenance, you may notice printing problems. It is then perhaps time to replace your dampers. The ink damper seal can wear out and let air in. If this is the case, you will notice missing print starts and poor print quality. We recommend that you replace the dampers when you change the print head. The shock absorber is connected with a 4 x 3mm or 4.2 x 2.8mm hose Read more
    EX. VAT : 5,75 € INCL. VAT : 6,90 €

  3. < -36

    in stock

    Ink damper for i3200 color printhead

    Product In stock

    Réf.:ADL_DAMP_I3200_COUL
    Ink damper for i3200 color print head + gasket and connector These dampers are used on the CMYK print head. With DTF inks, it is necessary to clean your printer regularly. But, in spite of a regular maintenance, it can happen that you observe printing problems. It is then perhaps time to replace your dampers. The ink damper seal can wear out and let air in. If this is the case, you will notice missing print starts and poor print quality. We recommend that you replace the dampers when you change the print head. The damper is connected with a 4 x 3mm hose Read more
    EX. VAT : 5,75 € INCL. VAT : 6,90 €

  4. < -119

    in stock

    Tablecloth for i3200 head

    Epson I3200 print head tablecloth - 450mm

    Product In stock

    Ref:ADL_NAPP_I3200

    Epson I3200 print head ribbon
    This ribbon is connected from the encoder board to the print head. We recommend you to replace the tablecloths when you change your printheads for a better result during your prints !

    Characteristics:
    - Length: 450 mm

    To know more about it
    EX. VAT : 3,25 € INCL. VAT : 3,90 €

  5. < -4

    in stock

    Glue 704

    Sealant for print head

    Out of stock

    Ref:Glue 704

    Protect your printheads from ink deposits!

    This industrial glue will allow you to deposit a waterproof silicone paste on the electronic parts of the head. Durable, it ensures an excellent permeability.

    Expiration date: 12 months.

    To know more about it
    EX. VAT : 8,25 € INCL. VAT : 9,90 €

GridView VueListe

5 article(s)