Unisub

Unisub

Unisub and ChromaLuxe are the leading brands of hard surface sublimable products in the United States and abroad. Offering customers the ability to customize a variety of products with vibrant color graphics on a wide variety of surfaces ranging from plates to key rings to coasters...

Unisub values the relationships it has developed in the sublimation sector and is constantly looking for solutions to meet the needs of its customers.

Unisub continues to create high quality products that will help develop and support the sublimation industry. Knowledge and skills are critical to success, and the brand is committed to providing technical and marketing support to its customers to help them grow and achieve their goals.

GridView VueListe

Articles 61 to 70 out of a total of 75

Page :
  1. 4
  2. 5
  3. 6
  4. 7
  5. 8
  1. Rectangular Wooden Luggage Tag

    Product In stock

    Réf.:MCR_90041003-REC

    Indispensable lorsque vous partez en voyage, cette étiquette bagage rectangulaire vous assure un voyage en toute sécurité. Léger et résistant, cet accessoire vous permettra de différencier votre bagage à l'aéroport et de le reconnaître en quelques secondes seulement.

    Vous pourrez personnaliser cette étiquette au gré de vos envies avec votre nom, votre adresse et pourquoi pas une photo.

    Etiquette vendue avec un lien en plastique transparent.

    Pensez à retirer le film protecteur avant marquage.

    L'Astuce Créadhesif : Pour améliorer la qualité de votre travail, pensez à utiliser une feuille de téflon et du scotch haute température. Nous vous conseillons de presser votre porte clés durant 40 secondes environ à 200°C avec une pression moyenne. Avant de lancer une production complète, réalisez toujours quelques essais, de façon à trouver le parfait équilibre entre votre pression, le temps de chauffe et la température.

    To know more about it
    EX. VAT : 2,46 € INCL. VAT : 2,95 € incl. VAT : From 2,09 €

  2. Cadre Photo Créatif en Bois avec Pied Fixe 19 x 12,5 cm

    Product In stock

    Réf.:ZBO_Cadre_MDF_19x12_pied_fixe

    Enhance your photos with this baroque photo frame with an original cut-out and folding foot. The glossy white surface finish will add a luminous effect to all your creations.

    This product is intended for use in polyester sublimation.

    Tip Creadhesive: To improve the quality of your work, consider using a teflon sheet and high temperature tape. We advise you to press your frame for about 40 seconds at 200°C with medium pressure. Before starting a complete production, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature. 

    To know more about it
    EX. VAT : 4,96 € INCL. VAT : 5,95 € incl. VAT : From 5,30 €

  3. Étiquette Bagage Feuille en MDF

    Product In stock

    Réf.:MIC_90041005-FEU

    Indispensable lorsque vous partez en voyage, cette étiquette bagage rectangulaire vous assure un voyage en toute sécurité. Léger et résistant, cet accessoire vous permettra de différencier votre bagage à l'aéroport et de le reconnaître en quelques secondes seulement.

    Vous pourrez personnaliser cette étiquette au gré de vos envies avec votre nom, votre adresse et pourquoi pas une photo.

    Etiquette vendue avec un lien en plastique transparent.

    Pensez à retirer le film protecteur avant marquage.

    L'Astuce Créadhesif : pour améliorer la qualité de votre travail, pensez à utiliser une feuille de téflon et du scotch haute température. Nous vous conseillons de presser votre porte clés durant 40 secondes environ à 200°C avec une pression moyenne. Avant de lancer une production complète, réalisez toujours quelques essais, de façon à trouver le parfait équilibre entre votre pression, le temps de chauffe et la température.

    To know more about it
    EX. VAT : 2,46 € INCL. VAT : 2,95 € incl. VAT : From 2,09 €

  4. 1 MDF Photo Frame with stand 17.5 x 11.5 cm

    Out of stock

    Réf.:ZBO_Cadre_photo_MDF _17.5_x_11.5cm

    Showcase your photos with this MDF photo frame with folding foot. Its original shape will seduce you and will easily find its place in any interior!

    Whether it'sa souvenir of a weekend with friends, a family meal or a trip, you can make the frame look as good as you want. It will fit in perfectly with any style of decoration. It can also be the ideal gift for all types of occasions: birthday, wedding, baptism ...


    The white glossy finish will give a bright rendering of all your creations and the composition in MDF (medium density wood fibre composite) makes it very solid.)

    NB: the foot is not fixed in order to facilitate marking. Once sublimated, simply peel off the adhesive part and position the foot on the frame.

    Tip Créadhesif: to improve the quality of your work, remember to use a sheet of Teflon and high temperature tape. We advise you to press your frame for about 80 seconds at 180°C with medium pressure. Before starting a full production run, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature.

    To know more about it
    EX. VAT : 4,12 € INCL. VAT : 4,95 € incl. VAT : From 4,40 €

  5. < -47

    in stock

    MDF photo frame with stand 18.4 x 11.4 cm

    1 Cadre Photo en MDF avec pied détachable 18,4 x 11,9 cm

    Product In stock

    Réf.:ZBO_Cadre_MDF _18x11_pied_detachable

    Mettez en valeur vos photos avec ce cadre photo en MDF avec pied rabattable. Sa forme originale saura vous séduire et trouvera facilement sa place dans un intérieur !

    Qu'il s'agisse d'un souvenir d'un week-end entre amis, d'un repas de famille ou d'un voyage, sublimez-le cadre à votre guise. Il s'intégrera parfaitement à tous les styles de décorations. Il peut également être le cadeau idéal à offrir pour tous types d'occasions :  anniversaire, mariage, baptème ...


    La finition blanc brillant vous donnera un rendu lumineux de toutes vos créations et la composition en MDF (composite de fibres de bois à densité moyenne) lui confère une solidité à toute épreuve).

    Le pied n'est pas fixé pour vous faciliter le marquage. De plus, il y a 2 encoches à l'arrière du cadre pour vous laisser le choix entre le mode portrait ou paysage !

    L'Astuce Créadhesif : pour améliorer la qualité de votre travail, pensez à utiliser une feuille de téflon et du scotch haute température. Nous vous conseillons de presser votre cadre durant 80 secondes environ à 180°C avec une pression moyenne. Avant de lancer une production complète, réalisez toujours quelques essais, de façon à trouver le parfait équilibre entre votre pression, le temps de chauffe et la température.

    To know more about it
    EX. VAT : 4,96 € INCL. VAT : 5,95 € incl. VAT : From 4,80 €

  6. 1 Cadre Photo en MDF avec pied détachable 28 x 15,5 cm

    Product In stock

    SKU:ZBO_MDF_photo_frame _28_x_15,5 cm

    Showcase your photos with this MDF photo frame with folding foot. Its original shape will seduce you and will easily find its place in any interior!

    Whether it'sa souvenir of a weekend with friends, a family meal or a trip, you can make the frame look as good as you want. It will fit in perfectly with any style of decoration. It can also be the ideal gift for all types of occasions: birthday, wedding, baptism ...


    The white glossy finish will give a bright rendering of all your creations and the composition in MDF (medium density wood fibre composite) makes it very solid.

    NB: the foot is not fixed in order to facilitate marking. Once sublimated, simply peel off the adhesive part and position the foot on the frame.

    Tip Créadhesif: to improve the quality of your work, remember to use a sheet of Teflon and high temperature tape. We advise you to press your frame for about 80 seconds at 180°C with medium pressure. Before starting a full production run, always carry out a few tests to find the perfect balance between your pressure, heating time and temperature.

    To know more about it
    EX. VAT : 7,46 € INCL. VAT : 8,95 € incl. VAT : From 7,60 €

  7. 100 One Side Plastic Keychain Badges 37 mm

    Product In stock

    SKU:TLN_PORTE037N

    This product will allow you to make original key rings and let your imagination run wild.

    This product includes:

    - a top shell

    - a film foil
    - a back shell
    - a steel ring and a chain

    The use of a badge press is necessary

     

     

    To know more about it
    EX. VAT : 29,96 € INCL. VAT : 35,95 €

  8. 100 double-sided plastic key ring badges 37mm

    Product In stock

    SKU:TLN_PORTE2FACES037N

    With this product you can make original double-sided key rings.

    Pour réaliser votre porte-clé vous devrez d'abord faire vos badges et les coller ensuite sur le support en plastique à l'aide du double face fournit dans le pack.

    Ce produit comprend :
    - 2 x coque métal avant
    - 2 x coque métal arrière
    - 2 x film mylar
    - 1 x anneau en plastique noir et une chaîne
    - 2 x pastilles de double-face

    L'utilisation d'une presse à badges est nécessaire. Nous recommandons d'utiliser nos presses à badges pour personnaliser ces produits. Pour vérifier la compatibilité avec votre presse, merci de vous rapporcher du service commercial.

    To know more about it
    EX. VAT : 34,96 € INCL. VAT : 41,95 €

  9. 500 double-sided plastic name tags 25 mm

    Product In stock

    SKU:TLN_PORTE2FACES025

    Avec ce produit vous pourrez réaliser des porte-clés double faces originaux. Pour cela, vous devrez d'abord faire vos badges et les coller ensuite sur le support en plastique à l'aide du double face fournit dans le pack. Attention, l'utilisation d'une presse à badges est nécessaire.

    Nous recommandons d'utiliser nos presses à badges pour personnaliser ces produits. Pour vérifier la compatibilité avec votre presse, merci de vous rapprocher du service commercial.

    Ce produit comprend :

    - 2 x front metal shell
    - 2 x metal back shell
    - 2 x film foil
    - 1 x black plastic ring and chain
    - 2 x double-sided pads

     This product exists in 37 mm

    To know more about it
    EX. VAT : 112,46 € INCL. VAT : 134,95 €

  10. 500 single-sided plastic key ring badges 25 mm

    Out of stock

    SKU:TLN_PORTE025

    Avec ce produit vous pourrez réaliser des porte-clés originaux. Pour cela, vous devrez d'abord faire vos badges et les coller ensuite sur le support en plastique à l'aide du double face fournit dans le pack. Attention, l'utilisation d'une presse à badges est nécessaire.

    Nous recommandons d'utiliser nos presses à badges pour personnaliser ces produits. Pour vérifier la compatibilité avec votre presse, merci de vous rapprocher du service commercial.

    Ce produit comprend :

    - 1 x coque métal avant
    - 1 x coque métal arrière
    - 1 x film mylar
    - 1 x anneau en plastique noir et une chaîne
    - 1 x pastilles de double-face

     This product exists in 37 mm

    To know more about it
    EX. VAT : 84,12 € INCL. VAT : 100,95 €

GridView VueListe

Articles 61 to 70 out of a total of 75

Page :
  1. 4
  2. 5
  3. 6
  4. 7
  5. 8