Silhouette

Silhouette

The products of the Silhouette brand are very varied cutting machines, blades, mats, accessories, vinyls, pens, inks, ...

All SILHOUETTE cutting machines are equipped with an optical sensor that detects the printed marks at the same time as your creation made with the Silhouette Studio software in order to cut precisely the contours created. Simply print your design on your printer, then load the printed paper into the SILHOUETTE. The device reads the marks on the sheet and cuts the contours around your creation.

The advantage of this brand is the possibility to use the PIXSCAN mat with your electronic cutting machine and the Silhouette Studio software. This mat allows you to cut precisely around a printed pattern or when you need to place cutting lines at a specific location on your image.

The flagship model of the brand is the Silhouette CAMEO. It is the ultimate DIY machine. It connects to your PC or Mac with a simple USB cable. The Silhouette CAMEO uses a small blade to cut over 100 different materials including paper, vinyl and fabric up to 30 centimeters wide and 3 meters long. When you replace the blade with a pen, the CAMEO can also draw and make dotted lines. The machine has the ability to cut out images printed with the mark detection system.

GridView VueListe

4 article(s)

  1. < -26

    in stock

    SILHOUETTE CAMEO 5

    Nouveauté ! SILHOUETTE CAMEO 5

    Product In stock

    Réf.:SILH-CAM5

    The last Cameo nugget has finally arrived! 

    La Cameo 5 bénéficie de toutes les caractéristiques de la Caméo 4 mais avec une rapidité et une précision de découpe améliorée. Découpez vinyle, papier cartonné et bien d'autres matériaux dans une largeur de 30,5 cm et jusqu'à 3 mm d'épaisseur.

    Les galets ont été repensés et sont entièrement ajustables pour vous permettre de les régler plus facilement. Vous pourrez enfin réaliser des découpes de petits matiériaux sans tapis de découpe.

    Les repères d'alignement pour les créations en Print & Cut sont détectés plus facilement et la découpe peut s'effectuer à distance en Bluetooth.

    Autres avantages :
    - Couvercle coulissant à ouverture douce
    - Capacité de coupe sans tapis
    - Fonctionnement plus silencieux
    - Lecture améliorée des repères d'alignement pour les créations en Print & Cut
    - Détection automatique des outils
    - Dégagement en hauteur permettant de couper des matériaux jusqu'à 3 mm d'épaisseur (contre 2 mm sur la Caméo 3)
    - Coupe transversale automatique avec l'Autoblade
    - Découpe sans fil avec connectivité Bluetooth
    - Compatible avec les outils électriques Silhouette
    - Compatible avec PixScan
    - Pilloté par le logiciel de conception illimité pour personnaliser vos projets

    The Product + : this plotter also benefits from a tutorial mode, which will guide you step by step during your first uses of the machine.

    Important : enregistrez-vous sur le site de Silhouette America , suivez bien les étapes d'enregistrement puis télécharger le logiciel : https://www.silhouetteamerica.com/setup. Une mise à jour du logiciel Silhouette Studio est nécessaire.

    Available in white only.

    Câble USB non fourni.

    To know more about it
    EX. VAT : 290,83 € INCL. VAT : 349,00 €

  2. < -10

    in stock

    Silhouette Studio Business Edition software

    Product In stock

    Ref:SILH_STUDIOBUSINESS

    N'attendez plus pour découvrir les nouvelles possibilités qui s'offrent à vous avec le logiciel Silhouette Studio Business Edition.

    Ce logiciel comprend toutes les fonctionnalités du logiciel Silhouette Studio et Designer Edition, avec en plus la possibilité d'ouvrir des fichiers AI, EPS, CDR, de réaliser des bordures d'échenillage et bien plus encore…

    Cette nouvelle version du logiciel vous permet désormais :

    - d'ouvrir, transformer et découper les fichiers ai, eps, cdr

    - de lancer deux découpes simultanément depuis le même logiciel
    - de réaliser du lettrage sur des dimensions importantes (pour des camions, des murs ...)
    - de réaliser des découpes par panneau à assembler
    - de réaliser des imbrications améliorées
    - de réaliser des bordures d'échenillage

    Ce logiciel offre une large palette de possibilités pour toutes vos créations.  Laissez vous séduire et ouvrez une nouvelle porte de la création !

    A noter : si vous commandez le logiciel seul, pensez à cliquer sur "retrait magasin" comme mode de livraison de façon à ne pas payer les frais de ports. Nous vous enverrons par mail le code qui vous permettra de télécharger le logiciel.

    Pour information ce logiciel peut être installé sur 3 postes de travail.

    Pour accéder au tableau comparatif des différentes versions de Silhouette Studio, cliquez ici !

     

    To know more about it
    EX. VAT : 99,99 € INCL. VAT : 119,99 €

  3. < -8

    in stock

    Plug-In Silhouette Connect PC & MAC

    Product In stock

    Ref:SILH_CONNECTDIGITAL

    Discover without further delay a brand new software that allows you to interface directly the Cameo Silhouette and the Silhouette Portrait professional Illustrator and Corel Draw software, on both PC and Mac.

    Don't wait any longer to discover the many possibilities that are available to you with this software!

    This software will allow you:
    - To manage the format of the transport page

    - To control the cutting parameters
    - To generate a frame ofweeding for vinyl films and supported materials

    This plug-in offers a wide range of possibilities for all your creations. Let yourself be seduced and open a new door of creation!

    Tip Créadhesif: If you start creating with your cameo, we recommend you use our starter kits to familiarize yourself with the different methods of customization.

    The + Product is that this software will also allow you to make a selective cut, by layer or by color.

    Please note: if you order only this software, do not add shipping costs to your order, choose the option "store pick-up" to pay no charge. Indeed the software will be sent to you by email in code form. You will not receive any other support by parcel.

    Pour information ce logiciel peut être installé sur 3 postes de travail.

     

    To know more about it
    EX. VAT : 36,66 € INCL. VAT : 43,99 €

  4. < -1

    in stock

    Silhouette Studio Designer Special Edition Strass

    Product In stock

    SKU:SILH_STUDIO-DE

    This new version of the software now allows you:
    - Open, transform and cut svg files

    - To create and cut your own rhinestone patterns
    - Convert your cutting contours into pencil effects (for ballpoint pens)
    - Easily apply effects to borders with the creative knife
    - Edit drawings more accurately with the improved eraser tool
    - Align and create with precision thanks to the guide lines

    This software offers a wide range of possibilities for all your creations, especially for rhinestones. Let yourself be seduced and open a new door of creation!

    Tip Créadhesif: To get started in the creation of rhinestones in complete serenity and benefit from models, tips and tricks, we recommend you to use in addition our starter kit for rhinestones.

    A noter: si vous commandez uniquement ce logiciel, n'ajoutez pas de frais de ports à votre commande, choisissez l'option "retrait magasin" pour ne payer aucun frais. En effet le logiciel vous sera envoyé par mail sous forme de code. Vous ne recevrez aucun autre support par colis. 


    Pour information ce logiciel peut être installé sur 3 postes de travail.


    Pour accéder au tableau comparatif des différentes versions de Silhouette Studio, cliquez ici !

    To know more about it
    EX. VAT : 45,82 € INCL. VAT : 54,99 €

GridView VueListe

4 article(s)