Tools

GridView VueListe

10 item(s)

  1. < -5

    in stock

    Adaptable blade holder for Graphtec CB09 plotter

    Adaptable blade holder for Graphtec CB09 plotter

    Product In stock

    SKU:PKT_PL_GRAPHTEC_CB09

    High quality aluminium blade holder that fits all Graphtec plotters

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder.

    This loss of accuracy can be caused either by the Teflon tape or by the damaged blade holder.

    Once you change your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : you must change your tool holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 49,92 € INCL. VAT : 59,90 €

  2. < -1

    in stock

    Felt holder for Graphtec plotter

    Felt holder for Graphtec plotter

    Product In stock

    SKU:ANK_PHP31-Fiber

    Felts are sold separately.

    Part Number : PHP31-Fiber

    To know more about it
    EX. VAT : 84,00 € INCL. VAT : 100,80 €

  3. Drive roller for Graphtec plotter

    Out of stock

    SKU:PKT_GALET GRAPHTEC

    Sold individually

    After several years of use, it is time to change your drive rollers.

    It is recommended to replace them all at the same time. They fit on all Graphtec plotters.

    Dimensions

    Diameter: 16mm
    Width: 11mm
    Shaft diameter: 4mm

    Tip Créadhésif : Before making a cut, position your pebbles 1.5 cm inside the vinyl. This will give you a better hold on the vinyl and therefore a more precise cut and repeatability.

    To know more about it
    EX. VAT : 22,00 € INCL. VAT : 26,40 €

  4. Graphtec metal tool holder for CB15 blade (Ø 1

    Product In stock

    Ref:ANK_PHP35-CB15

    Ref : PHP 31-CB 15

    To know more about it
    EX. VAT : 245,00 € INCL. VAT : 294,00 €

  5. < 2

    in stock

    Graphtec plastic tool holder for CB15 blade (Ø 1

    Graphtec plastic tool holder for CB15 blade (Ø 1

    Product In stock

    Ref:ANK_PHP33-CB15

    Ref : PHP32-CB 15

    To know more about it
    EX. VAT : 156,00 € INCL. VAT : 187,20 €

  6. < -3

    in stock

    Graphtec plastic tool holder for CB09 blade (Ø 0

    Graphtec plastic tool holder for CB09 blade (Ø 0

    Product In stock

    Ref:ANK_PHP33-CB09

    Graphtec plastic tool holder for CB09 blade (Ø 0,9mm) Ref : PHP 33-CB 09

    To know more about it
    EX. VAT : 156,00 € INCL. VAT : 187,20 €

  7. Graphtec metal tool holder for CB09 blade (Ø 0

    Product In stock

    Ref:ANK_PHP35-CB09

    Ref : PHP 31-CB 09

    To know more about it
    EX. VAT : 245,00 € INCL. VAT : 294,00 €

  8. < -44

    in stock

    Carrying sheet A3 for Craft-robo Pro

    1 Graphtec A3 Carrier Sheet

    Product In stock

    Réf.:ANK_PM-CM-003

    Transport sheets are used to cut the paper and hold the assembly together.

    The sheets are squared for better positioning.

    To know more about it
    EX. VAT : 33,80 € INCL. VAT : 40,56 €

  9. < -69

    in stock

    All Teflon martyr strips for Graphtec plotter

    All Teflon martyr strips for Graphtec plotter

    Product In stock

    Ref:Graphtec Teflon

    Trouvez toutes les bandes martyres en téflon pour votre plotter Graphtec

    Lorsque vous perdez en précision en particulier sur les petites lettrages, il est temps de changer votre bande de téflon. En effet, cette perte de précision peux provenir soit de la bande en téflon ou du porte-lame qui est abîmée. Une fois changé, vous verrez la qualité de découpe s'améliorer la plupart du temps. Si le problème persiste, contactez alors votre revendeur.

    Bande de téflon PTFE noir graphité antistatique et adhésif sur une face.

    Epaisseur : 25/100ème

    Sélectionnez ci-dessous votre modèle.

    To know more about it
    EX. VAT : 20,83 € INCL. VAT : 25,00 €

  10. Graphtec CE LITE-50 Pen Holder

    Product In stock

    Ref:ANK_PM-BH-001

    This pen holder allows your Graphtec CE-LITE 50 to draw lines with a simple ballpoint pen. It is useful for drawing with your own pens or felt-tip pens. This product is the ideal complement to all your cutting tools. It is compatible only with your Graphtec CE LITE-50.

    To know more about it
    EX. VAT : 15,00 € INCL. VAT : 18,00 €

GridView VueListe

10 item(s)