Supports and tools

GridView VueListe

Articles 11 to 20 out of a total of 56

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. < -10

    in stock

    USB Serial port CIV, S, T, CV, SII, TII

    USB port for Secabo CIV plotter

    Product In stock

    Ref:SCB_portuSB_series-IV
    USB port for Secabo Series IV plotter Learn more
    EX. VAT : 36,67 € INCL. VAT : 44,00 €

  2. < -84

    in stock

    Box of 5 Roland & Secabo 30° blades

    Box of 5 blades 30° Roland, Secabo & Rabbit

    Product In stock

    SKU:PKT_ROLAND 30

    Dimension:
    Diameter: 2mm
    Length: 23mm
    Angle: 30°

    These blades can also be used with Roland CAMM-1, BN20, CammJet, Stika, GCC, PUMA, LYNX, KOCY, Vynil espress, Liyu, Refine, Secabo, Allen Datagraph, CSR Ecom-2, Anagraph.

    These blades fit all types of cutting plotter using Roland standard blades. The 30° blades are recommended for cutting thin materials (0.2 to 0.4mm), small lettering and complex logos.

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  3. < -58

    in stock

    Box of 5 Roland & Secabo 60° blades

    Box of 5 blades 60° Roland, Secabo & Rabbit

    Product In stock

    SKU:PKT_ROLAND 60

    Dimension:
    Diameter: 2mm
    Length: 23mm
    Angle: 60°

    These blades can also be used with Roland CAMM-1, BN20, CammJet, Stika, GCC, PUMA, LYNX, KOCY, Vynil espress, Liyu, Refine, Secabo, Allen Datagraph, CSR Ecom-2, Anagraph

    These blades fit on all types of cutting plotter using Roland standard blades. The 60° blades are recommended for cutting thick materials ( > 1,2mm ) such as flex, flock, reflective vinyl, sandblasting mask...

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  4. < -11

    in stock

    Mounting kit for interchangeable trays

    Mounting kit for Secabo interchangeable trays

    Product In stock

    Réf.:SCB_109.501.20_2 vis

    Fastening kit for Secabo interchangeable trays for direct mounting on the plinth without using a quick-loading trolley

    To know more about it
    EX. VAT : 9,00 € INCL. VAT : 10,80 €

  5. < -19

    in stock

    Interchangeable tray 15cm x 15cm for Secabo heat presses

    Interchangeable tray 15cm x 15cm for Secabo heat presses

    Product In stock

    Réf.:SCB_109.501.02_plateau 15*15

    Interchangeable platen 15cm x 15cm for heat press Secabo.

    Can be used with press models TC5, TC7 and TS7 TPD7.

    To use without loading trolley the optional mounting kit is required.

    To know more about it
    EX. VAT : 89,00 € INCL. VAT : 106,80 €

  6. < -16

    in stock

    Interchangeable tray 20cm x 30cm for Secabo heat presses

    Interchangeable tray 20cm x 30cm for Secabo heat presses

    Product In stock

    Réf.:SCB_109.501.01_plateau 20*30

    Interchangeable tray 20cm x 30cm for heat press Secabo.

    For use with TC5, TC7 and TS7 TPD7 press models.

    For use without loading trolley, the optional mounting kit is required.

    To know more about it
    EX. VAT : 99,00 € INCL. VAT : 118,80 €

  7. < -10

    in stock

    Blade holder for Secabo C IV - S and T plotters

    Blade holder Secabo C IV - S and T

    Product In stock

    Ref:SCB_LAME_HOLDER_CIV

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder. This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged. Once you have changed your blade holder, you will see the cutting quality improve.

    Fits on all Secabo CIV plotters. Aluminium blade holder.

    Equipped with adjusting screw and double ball bearing.

    Tip Créadhésif : You must change your tool holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 52,00 € INCL. VAT : 62,40 €

  8. 4 interchangeable platens for Secabo presses

    Product In stock

    Réf.:SCB_4-plateaux-8*12+15*15+12*38+20*30

    Set of four interchangeable plates for SECABO hot presses.

    This set contains the following plates:
    - 1 x Exchangeable plate 15 cm x 15cm
    - 1 x Exchangeable plate 20 cm x 30cm
    - 1 x Exchangeable plate 12 cm x 8 cm
    - 1 x Exchangeable plate 12 cm x 38 cm


    Suitable for TC5 smart, TC7 smart, TS7, TPD7 and TPD7 Premium models.

    Tip Créadhésif : we recommend the quick loading trolley for an easier use of your trays

    To know more about it
    EX. VAT : 319,00 € INCL. VAT : 382,80 €
  9. < -2

    in stock

    Interchangeable tray 38cm x 38cm for Secabo heat presses

    Plateau interchangeable 38 cm x 38 cm pour adaptateur pour presses à chaud Secabo

    Product In stock

    Réf.:SCB_109.505.40_plateau inf 38*38

    It can be used with the TC5, TC7, TS7 and TPD7 press models.
    However, in order to use it without a loading carriage, it is necessary to use the optional mounting kit.

    To know more about it
    EX. VAT : 129,00 € INCL. VAT : 154,80 €

    Delivered within 7 days

  10. < 2

    in stock

    Conical heating element 17 oz

    Elément chauffant conique Presse à mugs 17 oz

    Product In stock

    Ref:XNH_ELEMENT_CONIQUE_17OZ

    Si votre élément chauffant présente des traces d'usure ou si vous souhaitez élargir votre gamme de produits, vous pouvez tout à fait opter pour cet élément chauffant conique. Cet élément est parfait pour les objets coniques d'une contenance de 17 oz.

    Cet élément s'adapte sur les presses à mugs Créadhésif et est facile à changer.

    Cet élément possède sur chaque côté 4 trous de fixation en L.

    Please note: the edges of the mug and the areas near its handle cannot be customized. The heating element does not completely surround your mug and the heat will not be homogeneous and strong enough to personalize the ends of the mug. You need to choose a suitable design and allow for a technical margin of 3-4 mm on the edges of your mug. Also check the area covered by your heating element and allow a margin of 7-8 mm from the handle of the mug.

    To know more about it
    EX. VAT : 32,50 € INCL. VAT : 39,00 €

GridView VueListe

Articles 11 to 20 out of a total of 56

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5