Blades and Blade Holders

Découvrez notre offre de lames et porte-lames adaptée à votre plotter et à vos besoin.
Découpez votre flex ou vinyle en toute sérénité et donnez leur la forme de votre choix grâce à notre variété de produits.
Vous pourrez ainsi réaliser des créations en flockage (avec du flex) mais également de la signalétique (avec du vinyle).

Nous proposons différentes marques et degrés de lames pour convenir à toutes vos envies :
- Les lames de 45° sont utilisées pour tous types de découpes et de matériaux d'une épaisseur de 0,5 à 1,1 mm, c'est la lame dite "standard"
- Les lames de 60° sont recommandées pour la découpe de matériaux épais tels que le flock, le vinyle réfléchissant, le masque de sablage....
- Les lames de 30° sont recommandées pour la découpe de matériaux fins, les petits lettrages et les logos complexes




Find many explanations, tips and tricks via our video tutorials on our channel YouTube : Créadhésif ! You can also subscribe to one of our Webinars (Support category on our website).

GridView VueListe

Items 1 to 10 out of a total of 49

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. < -5

    in stock

    Adaptable blade holder for Graphtec CB09 plotter

    Adaptable blade holder for Graphtec CB09 plotter

    Product In stock

    SKU:PKT_PL_GRAPHTEC_CB09

    High quality aluminium blade holder that fits all Graphtec plotters

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder.

    This loss of accuracy can be caused either by the Teflon tape or by the damaged blade holder.

    Once you change your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : you must change your tool holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 49,92 € INCL. VAT : 59,90 €

  2. Mimaki Adaptable Blade Holder

    Product In stock

    SKU:PKT_PL_MIMAKI

    High quality aluminium blade holder that fits all Mimaki plotters.

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder.

    This loss of accuracy can be caused either by the Teflon tape or the damaged blade holder.

    Once you change your blade holder, you will see the quality of the cut improve.

    Tip Créadhésif : You should change your cutter holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

     

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  3. Blade holder for Pcut plotter

    Product In stock

    SKU:PKT_PL_PCUT

    High quality aluminium blade holder that fits all Rabbit plotters.

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder.

    This loss of precision can be caused either by the Teflon tape or by the damaged blade holder.

    Once you change your blade holder, you will see the quality of the cut improve.

    Tip Créadhésif : You should change your cutter holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  4. Graphtec metal tool holder for CB09 blade (Ø 0

    Product In stock

    Ref:ANK_PHP35-CB09

    Ref : PHP 31-CB 09

    To know more about it
    EX. VAT : 245,00 € INCL. VAT : 294,00 €

  5. < -3

    in stock

    Graphtec plastic tool holder for CB09 blade (Ø 0

    Graphtec plastic tool holder for CB09 blade (Ø 0

    Product In stock

    Ref:ANK_PHP33-CB09

    Graphtec plastic tool holder for CB09 blade (Ø 0,9mm) Ref : PHP 33-CB 09

    To know more about it
    EX. VAT : 156,00 € INCL. VAT : 187,20 €

  6. < 2

    in stock

    Graphtec plastic tool holder for CB15 blade (Ø 1

    Graphtec plastic tool holder for CB15 blade (Ø 1

    Product In stock

    Ref:ANK_PHP33-CB15

    Ref : PHP32-CB 15

    To know more about it
    EX. VAT : 156,00 € INCL. VAT : 187,20 €

  7. Graphtec metal tool holder for CB15 blade (Ø 1

    Product In stock

    Ref:ANK_PHP35-CB15

    Ref : PHP 31-CB 15

    To know more about it
    EX. VAT : 245,00 € INCL. VAT : 294,00 €

  8. < -3

    in stock

    Adaptable blade holder for Graphtec CB15 plotter

    Adaptable Blade Holder Graphtec CB15

    Product In stock

    SKU:PKT_Graphtec CB15

    High quality aluminium blade holder that fits all Rabbit plotters (CB15).

    When you lose precision, especially when cutting fine logos, it is time to change your blade holder.
    This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged.
    Once you have changed your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : You should change your cutter holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 49,92 € INCL. VAT : 59,90 €

  9. < -3

    in stock

    Adaptable blade holder for Summa plotter

    Summa Adaptable Blade Holder

    Product In stock

    SKU:PKT_PL_SUMMA

    High quality aluminium blade holder that fits all Summa plotters.

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder.
    This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged.
    Once you have changed your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : You must change your tool holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  10. < -2

    in stock

    Blade holder for Rabbit plotter

    Rabbit Blade Holder

    Product In stock

    Ref:PKT_PL_RABBIT

    High quality aluminium blade holder that fits all Rabbit plotters.

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder.
    This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged.
    Once you have changed your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : You should change your cutter holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

GridView VueListe

Items 1 to 10 out of a total of 49

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5