Blades and Blade Holders

Découvrez notre offre de lames et porte-lames adaptée à votre plotter et à vos besoin.
Découpez votre flex ou vinyle en toute sérénité et donnez leur la forme de votre choix grâce à notre variété de produits.
Vous pourrez ainsi réaliser des créations en flockage (avec du flex) mais également de la signalétique (avec du vinyle).

Nous proposons différentes marques et degrés de lames pour convenir à toutes vos envies :
- Les lames de 45° sont utilisées pour tous types de découpes et de matériaux d'une épaisseur de 0,5 à 1,1 mm, c'est la lame dite "standard"
- Les lames de 60° sont recommandées pour la découpe de matériaux épais tels que le flock, le vinyle réfléchissant, le masque de sablage....
- Les lames de 30° sont recommandées pour la découpe de matériaux fins, les petits lettrages et les logos complexes




Find many explanations, tips and tricks via our video tutorials on our channel YouTube : Créadhésif ! You can also subscribe to one of our Webinars (Support category on our website).

GridView VueListe

2 article(s)

  1. < -10

    in stock

    Blade holder for Secabo C IV - S and T plotters

    Blade holder Secabo C IV - S and T

    Product In stock

    Ref:SCB_LAME_HOLDER_CIV

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder. This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged. Once you have changed your blade holder, you will see the cutting quality improve.

    Fits on all Secabo CIV plotters. Aluminium blade holder.

    Equipped with adjusting screw and double ball bearing.

    Tip Créadhésif : You must change your tool holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 52,00 € INCL. VAT : 62,40 €

  2. < -12

    in stock

    Blade holder Secabo C V - S II and T II

    Product In stock

    Réf.:SCB_154.800.41

    Fits on all Secabo CIV plotters. Aluminium blade holder.

    Equipped with adjusting screw and double ball bearing.

    When you lose accuracy, especially when cutting fine logos, it is time to change your cutter head. Indeed, this loss of precision can come either from the teflon tape or from the damaged blade holder. Once you have changed your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : You should change your cutter holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 52,00 € INCL. VAT : 62,40 €

GridView VueListe

2 article(s)