Blades and Blade Holders

Découvrez notre offre de lames et porte-lames adaptée à votre plotter et à vos besoin.
Découpez votre flex ou vinyle en toute sérénité et donnez leur la forme de votre choix grâce à notre variété de produits.
Vous pourrez ainsi réaliser des créations en flockage (avec du flex) mais également de la signalétique (avec du vinyle).

Nous proposons différentes marques et degrés de lames pour convenir à toutes vos envies :
- Les lames de 45° sont utilisées pour tous types de découpes et de matériaux d'une épaisseur de 0,5 à 1,1 mm, c'est la lame dite "standard"
- Les lames de 60° sont recommandées pour la découpe de matériaux épais tels que le flock, le vinyle réfléchissant, le masque de sablage....
- Les lames de 30° sont recommandées pour la découpe de matériaux fins, les petits lettrages et les logos complexes




Find many explanations, tips and tricks via our video tutorials on our channel YouTube : Créadhésif ! You can also subscribe to one of our Webinars (Support category on our website).

GridView VueListe

4 article(s)

  1. < -7

    in stock

    Adaptable blade holder for Roland plotter

    Adaptable blade holder for Roland plotter

    Product In stock

    SKU:PKT_PL_ROLAND

    Blade holder for Plotter Roland

    High quality aluminum blade holder that fits all Roland plotters.

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder. This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged. Once you have changed your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : you must change your tool holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  2. Box of 5 blades 45° Roland, Secabo & Rabbit

    Product In stock

    SKU:PKT_ROLAND 45

    Box of 5 blades for Roland, Secabo, Rabbit plotter...

    Dimensions :  

    Diameter: 2mm
    Length: 23mm
    Angle: 45°.

    These blades fit on all types of cutting plotter using Roland standard blades.
    Can also be used with Roland CAMM-1, BN20, CammJet, Stika, GCC, PUMA, LYNX, KOCY, Vynil espress, Liyu, Refine, Secabo, Allen Datagraph, CSR Ecom-2, Anagraph.

    The 45° angle is ideal for cutting materials with a thickness of 0.5 to 1.1mm.

    To know more about it
    EX. VAT : 33,25 € INCL. VAT : 39,90 €

  3. < -84

    in stock

    Box of 5 Roland & Secabo 30° blades

    Box of 5 blades 30° Roland, Secabo & Rabbit

    Product In stock

    SKU:PKT_ROLAND 30

    Dimension:
    Diameter: 2mm
    Length: 23mm
    Angle: 30°

    These blades can also be used with Roland CAMM-1, BN20, CammJet, Stika, GCC, PUMA, LYNX, KOCY, Vynil espress, Liyu, Refine, Secabo, Allen Datagraph, CSR Ecom-2, Anagraph.

    These blades fit all types of cutting plotter using Roland standard blades. The 30° blades are recommended for cutting thin materials (0.2 to 0.4mm), small lettering and complex logos.

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

  4. < -58

    in stock

    Box of 5 Roland & Secabo 60° blades

    Box of 5 blades 60° Roland, Secabo & Rabbit

    Product In stock

    SKU:PKT_ROLAND 60

    Dimension:
    Diameter: 2mm
    Length: 23mm
    Angle: 60°

    These blades can also be used with Roland CAMM-1, BN20, CammJet, Stika, GCC, PUMA, LYNX, KOCY, Vynil espress, Liyu, Refine, Secabo, Allen Datagraph, CSR Ecom-2, Anagraph

    These blades fit on all types of cutting plotter using Roland standard blades. The 60° blades are recommended for cutting thick materials ( > 1,2mm ) such as flex, flock, reflective vinyl, sandblasting mask...

    To know more about it
    EX. VAT : 41,58 € INCL. VAT : 49,90 €

GridView VueListe

4 article(s)