Graphtec

How to choose the right angle for your cutting blade?

- The CB09 adaptable or CB09-UD (45°) blades are recommended materials such as flex, flock, vinyl, inactinic film, fine sandblasting masking film

- The CB09-UA (45°) blades are recommended materials such as flex, flock, vinyl, inactinic film, fine sandblasting masking film
as well as fine polyester film (solar, protection...).


- The CB15-U blade (45°) is recommended for materials such as flex, flock, vinyl, inactinic film, fine sandblasting masking film
as well as for thick materials, cardboard, flexible synthetics, thick polymers


- The CB15-UK 30 blade (60°) is recommended for thick and soft materials, thick rubbery blasting mask

GridView VueListe

Articles 11 to 16 out of a total of 16

Page :
  1. 1
  2. 2
  1. < -5

    in stock

    Adaptable blade holder for Graphtec CB09 plotter

    Adaptable blade holder for Graphtec CB09 plotter

    Product In stock

    SKU:PKT_PL_GRAPHTEC_CB09

    High quality aluminium blade holder that fits all Graphtec plotters

    When you lose precision, especially when cutting fine logos, it's time to change your blade holder.

    This loss of accuracy can be caused either by the Teflon tape or by the damaged blade holder.

    Once you change your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : you must change your tool holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 49,92 € INCL. VAT : 59,90 €

  2. < -3

    in stock

    Adaptable blade holder for Graphtec CB15 plotter

    Adaptable Blade Holder Graphtec CB15

    Product In stock

    SKU:PKT_Graphtec CB15

    High quality aluminium blade holder that fits all Rabbit plotters (CB15).

    When you lose precision, especially when cutting fine logos, it is time to change your blade holder.
    This loss of accuracy can be caused either by the Teflon tape or by the blade holder being damaged.
    Once you have changed your blade holder, you will see the cutting quality improve.

    Tip Créadhésif : You should change your cutter holder at least every two years. To check the condition of your cutter head, take out the blade and try to rotate it, if you feel that it is "sticking" despite cleaning the blade, it is time to change the cutter head.

    To know more about it
    EX. VAT : 49,92 € INCL. VAT : 59,90 €

  3. < -4

    in stock

    Graphtec plastic tool holder for CB09 blade (Ø 0

    Graphtec plastic tool holder for CB09 blade (Ø 0

    Product In stock

    Ref:ANK_PHP33-CB09

    Graphtec plastic tool holder for CB09 blade (Ø 0,9mm) Ref : PHP 33-CB 09

    To know more about it
    EX. VAT : 156,00 € INCL. VAT : 187,20 €

  4. Graphtec metal tool holder for CB09 blade (Ø 0

    Product In stock

    Ref:ANK_PHP35-CB09

    Ref : PHP 31-CB 09

    To know more about it
    EX. VAT : 245,00 € INCL. VAT : 294,00 €

  5. < 2

    in stock

    Graphtec plastic tool holder for CB15 blade (Ø 1

    Graphtec plastic tool holder for CB15 blade (Ø 1

    Product In stock

    Ref:ANK_PHP33-CB15

    Ref : PHP32-CB 15

    To know more about it
    EX. VAT : 156,00 € INCL. VAT : 187,20 €

  6. Graphtec metal tool holder for CB15 blade (Ø 1

    Product In stock

    Ref:ANK_PHP35-CB15

    Ref : PHP 31-CB 15

    To know more about it
    EX. VAT : 245,00 € INCL. VAT : 294,00 €

GridView VueListe

Articles 11 to 16 out of a total of 16

Page :
  1. 1
  2. 2