Secabo Plotter

Secabo : la marque de plotters conformes aux normes de sécurité allemandes !


L’entreprise Secabo, basée en Bavière, a introduit ces dernières années une large gamme de matériels et de fournitures pour les enseignes de personnalisation de textiles et d’objets. La marque propose un ensemble de plotters répondent aux normes de qualité et de sécurité les plus strictes et bénéficient d'une garantie de 24 mois.

Son avantage par rapport à ses concurrents est la présence des logiciels de découpe DrawCut. En effet, ces logiciels présentent des fonctions simples et efficaces pour la conception et la mise en page de textes et d'objets graphiques. Ils présentent aussi des fonctions puissantes telles que l'alignement de texte chemin-à-chemin, l'ombrage et la vectorisation (Drawcut Pro).




GridView VueListe

Articles 11 to 18 out of a total of 18

Page :
  1. 1
  2. 2
  1. < -1

    in stock

    cutting plotter Secabo S120 IV

    cutting plotter Secabo S120 II

    Product In stock

    Réf.:SCB_106.127.10_S120II

    Découvrez la 2ème génération des plotters Secabo série S, une gamme fiable et performante pour démarrer sereinement dans le flockage textile avec un ploter semi-professionnel.Gagnez en précision et en rapidité avec une tête de découpe avec Servo-moteurs et du système LAPOS

    Ce plotter est idéal pour la découpe d'une grande variété de matériaux, tels que le vinyle, le flex, le flock
    les pochoirs, les cartons et papiers… Avec ce plotter , vous pouvez travailler avec des rouleaux d'une largeur de 1350 cm, la découpe maximum étant de 1260 cm de large. La nouvelle génération S série II présente de nombreuses améliorations par rapport à la version S1 : paramètres de vitesse, découpe, et pression plus fiables, précis et efficaces.

    L'écran rétro-éclairé facilite par ailleurs l'utilisation au quotidien. Equipé d'un capteur Lapos 2, vous pourrez également réaliser des détourages de matériaux préalablement imprimés, pour réaliser par exemple des autocollants.

    Ce plotter possède de nombreux atouts :
    - Ce plotter est équipé d'un servo-moteur, ce qui permet une traction parfaite, un déplacement du chariot optimal et surtout une découpe des courbes parfaites.
    - Une Installation facile pour PC : inutile de télécharger des pilotes en complément. Compatible avec les système d'expoilation Windows 7, Windows 8, Windows 8.1, Windows 10 ( 32 et 64 bits )
    - Un clavier confortable, éclairé, ergonomique, qui bénéficie de grandes touches
    - Une interface USB facile à installer
    - La possibilité d'utiliser ce plotter avec Mac grace au logiciel SignCut (sans LAPOS)
      licence valable 1 an (sur demande)
    - Une lecture rapide et améliorée des croix de repères avec le logiciel Lapos 2 pour un détourage parfait : détection manuelle (DrawCut PRO en option)
    - Épaisseur maximale du support : 1 mm

    Le + produit Créadhesif : inclus dans le prix du plotter, le DrawCut Lite qui allie performance et facilité d'utilisation

    Tip Creadhesif: think about cutting the flex and flock in "mirror" mode in your software so that you can have your image or logo right on your t-shirt. We also recommend that you use two separate blades to cut the flock and flex. Indeed, your blade used for flock cutting will wear out much faster than the one used for flex.

    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés.

    Order your plotter on Créadhésif, and get 5% off your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.



    To know more about it
    EX. VAT : 1 449,00 € INCL. VAT : 1 738,80 €

  2. < -1

    in stock

    cutting plotter Secabo S60 II

    Product In stock

    Réf.:SCB_106.067.10_S60II

    Discover the 2nd generation of Secabo S series plotters, a reliable and high performance range to start serenely in textile flocking with a semi-professional plotter.

    Gain in precision and speed with a cutting head with Servo-motors and the LAPOS system

    This plotter is ideal for cutting a wide variety of materials, such as vinyl ,flex, flock, stencils, cardboard and paper... With this plotter, you can work with rolls up to 72 cm wide, the maximum cutting width being 61 cm. The new CIV generation has many improvements over the CIII version: speed, cutting and pressure settings are more reliable, accurate and efficient.

    The backlit display also makes it easier to use in everyday life. Equipped with a Lapos 2 sensor, you can also perform trimming of previously printed materials, for example to make stickers.

    This plotter has many advantages:

    - This plotter is equipped with a servo motor, which allows perfect traction, optimal carriage movement and above all perfect curve cutting.
    -
    Easy installation for PC: no need to download additional drivers
    - Compatible with Windows 7, Windows 8, Windows 8.1, Windows 10 ( 32 and 64 bits )
    - A comfortable, illuminated, ergonomic keyboard with large keys
    - An easy to install USB interface
    - The possibility to use this plotter with a Mac thanks to the SignCut software (without LAPOS)
    1 year licence (on request)
    - A fast and improved reading of the cross marks with the Lapos 2 software for a perfect trimming (manual trimming of the marks)

    The Créadhesif product advantage :included in the price of the plotter, the DrawCut Lite which combines performance and ease of use

    Tip Creadhesif: remember to cut the flex and flock in "mirror" mode in your software so that your image or logo is right side up on your T-shirt. We also recommend that you use two separate blades to cut the flock and flex. The blade you use for flock cutting will wear out much faster than the one used for flex cutting.

    Order your plotter on Créadhésif, and get 5% off your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.



    To know more about it
    EX. VAT : 1 139,00 € INCL. VAT : 1 366,80 €

  3. < -3

    in stock

    cutting plotter Secabo C120 V

    Product In stock

    Réf.:SCB_106.125.10_C120V

    Discover the new generation of Secabo CV plotters, a reliable and high performance range for a smooth start in textile flocking.

    En effet, ce plotter présente de nombreuses améliorations par rapport à la Série CIV avec une haute qualité de découpe, la pression et la vitesse et toujours une laize de découpe allant jusqu'à 126 cm (matériaux allant jusqu'à 135 cm). Ainsi, ce plotter est idéal pour la découpe d'une grande variété de matériaux, tels que le vinyle, le flex, le flock les pochoirs, les cartons et papiers …

    Équipé d'un nouveau capteur optique, celui-ci permet un détourage de feuilles pré-imprimées en toute simplicité grâce au système LAPOS. Ainsi, ce plotter vous garantit  performance à prix réduit
    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés.

  4. Items included with the Secabo C120V plotter
  5. - Multilingual software (Windows) including the automatic vectorization of your files and the possibility to use the LAPOS XPT system to cut your printed files (see video) or Sign Cut in option (mac - one year license)
    - 1 base with roller holder
    - 1 blade 30°
    - 1 blade holder
    - 1 pencil holder
    - 1 transport sheet A3
    - 1 power cable
    - Instructions

  • This plotter has many advantages!
  • - Easy installation for PC: no need to download additional drivers (works only with Win 7, 8 & 8.1, 10 (32/64 bits),
    operation with older Windows version is not possible
    - Comfortable, illuminated, ergonomic keyboard with large keys
    - Easy to install USB interface
    - Possibility to use this plotter with Mac thanks to SignCut software (without LAPOS)
    1 year license (on request)
    - Fast and improved reading of the marker crosses with Lapos 2 software for perfect trimming : manual detection (with DrawCut Pro)
    - Maximum media thickness: 1 mm

  • Our valuable advice
  • For a perfect hold of your cutting board, we recommend you to position your rollers at 1,5 cm from each end of the roll.

  • Discover the C range of Secabo plotters

  • Order your plotter on Créadhésif, and get a 5% discount on your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.

     



    To know more about it

    EX. VAT : 1 349,00 € INCL. VAT : 1 618,80 €

    Delivered within 7 days

  • < -7

    in stock

    cutting plotter Secabo C60 V

    cutting plotter Secabo C60 V

    Product In stock

    Réf.:SCB_106.065.10_C60V

    Discover the new generation of Secabo CV plotters, a reliable and performing range to start serenely in textile flocking.

    Indeed, this plotter presents many improvements compared to the CIV Series with a high cutting quality, pressure and speed and still a cutting width up to 63 cm (materials up to 72 cm). This makes this plotter ideal for cutting a wide variety of materials, such as vinyl, flex, flock
    , stencils, cardboard and paper...

    Equipped with a new optical sensor, this plotter allows for easy trimming of pre-printed sheets with the LAPOS system. Thus, this plotter guarantees performance at a reduced price

  • The elements included with the Secabo C60V plotter
  • - Multilingual software (Windows) including the automatic vectorization of your files and the possibility to use the LAPOS XPT system to cut your printed files (see video) or Sign Cut in option (mac - one year license)
    - 1 base with roller holder
    - 1 blade 30°
    - 1 blade holder
    - 1 pencil holder
    - 1 transport sheet A3
    - 1 power cable
    - Instructions

  • This plotter has many advantages!
  • - Easy installation for PC: no need to download additional drivers (works only with Win 7, 8 & 8.1, 10 (32/64 bits),
    operation with older Windows version is not possible
    - Comfortable, illuminated, ergonomic keyboard with large keys
    - Easy to install USB interface
    - Possibility to use this plotter with Mac thanks to SignCut software (without LAPOS)
    1 year license (on request)
    - Fast and improved reading of the marker crosses with Lapos 2 software for perfect trimming : manual detection (with DrawCut Pro)
    - Maximum media thickness: 1 mm

  • Our valuable advice
  • For a perfect hold of your cutting board, we recommend you to position your rollers at 1,5 cm from each end of the roll.

  • Discover the C range of Secabo plotters

  • Order your plotter on Créadhésif, and get a 5% discount on your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.

     



    To know more about it

    EX. VAT : 979,00 € INCL. VAT : 1 174,80 €

  • cutting plotter Secabo C120 IV

    Product In stock

    Réf.:SCB_106.124.09_C120IV

    Are you looking for an easy to use and efficient cutting plotter to get started in flocking?

    Discover the 4th generation of Secabo plotters, a reliable and high-performance range for a smooth start in textile flocking.

    This plotter is ideal for cutting a wide variety of materials, such as vinyl, flex, flock With this plotter you can work with rolls up to 130 cm wide, the maximum cutting width is 120 cm. The new CIV generation has many improvements over the CIII version: more reliable, accurate and efficient speed, cutting and pressure settings.

    The backlit display also makes daily use easier.
    Equipped with a Lapos 2 sensor, you can also perform trimming of previously printed materials, for example to make stickers with the DrawCut PRO.
    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés

  • Items included with the Secabo C120IV plotter
  • - Multilingual software DrawCut LITE (Windows) or Sign Cut in option (mac - one year license)
    - 1 base with roller holder
    - 1 blade 30°
    - 1 blade holder
    - 1 pencil holder
    - 1 transport sheet A3
    - 1 power cable
    - User manual

    In option Drawcut Pro software (Windows) including automatic vectorization of your files and the possibility to use the LAPOS XPT system for the clipping of your printed files (see video)

  • This plotter has many advantages!
  • - Easy installation for PC. No need to download additional drivers (works only with Windows 7, Windows 8, Windows 8.1, Windows 10 ( 32 and 64 bits )
    - Comfortable, illuminated, ergonomic keyboard with large keys
    - Easy to install USB interface
    - Possibility to use this plotter with Mac with SignCut software (without LAPOS). The license is valid for 1 year (on request)
    - A fast and improved reading of the marker crosses with the Lapos 2 software with DrawCut PRO

  • Our valuable advice
  • For a perfect hold of your cutting board, we recommend you to position your rollers at 1,5 cm from each end of the roll.


    Order your plotter on Créadhésif, and get a 5% discount on your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.

     



    To know more about it

    EX. VAT : 879,00 € INCL. VAT : 1 054,80 €

    Delivered within 7 days

  • cutting plotter Secabo C60 IV With Legs

    Product In stock

    Réf.:SCB_106.064.09+106.064.70_C60 IV_2COLIS

    This plotter is ideal for cutting a wide variety of materials, such as vinyl , flex, flock, With this plotter, you can work with rolls up to 60 cm wide. The new generation CIV has many improvements compared to the CIII version: speed, cutting and pressure parameters are more reliable, precise and efficient.

    The backlit display also makes daily use easier.
    Equipped with a Lapos 2 sensor, you can also perform trimming of previously printed materials, for example to make stickers with the DrawCut PRO

  • Items included with the Secabo C60IV plotter
  • - Multilingual software DrawCut LITE (Windows) or Sign Cut in option (mac - one year license)
    - 1 blade 30°
    - 1 blade holder
    - 1 pencil holder
    - A stand with roller holder
    - 1 transport sheet A3
    - 1 power cable
    - User manual

    In option Drawcut Pro software (Windows) including the automatic vectorization of your files and the possibility to use the LAPOS XPT system for clipping your printed files (see video)

  • This plotter has many advantages!
  • - Easy installation for PC. No need to download additional drivers (works only with Windows 7, Windows 8, Windows 8.1, Windows 10 ( 32 and 64 bits )
    - Comfortable, illuminated, ergonomic keyboard with large keys
    - Easy to install USB interface
    - Possibility to use this plotter with Mac with SignCut software (without LAPOS). The license is valid for 1 year (on request)
    - A fast and improved reading of the marker crosses with the Lapos 2 software with DrawCut PRO

  • Our valuable advice
  • For a perfect hold of your cutting board, we recommend you to position your rollers at 1,5 cm from each end of the roll.


    Order your plotter on Créadhésif, and get a 5% discount on your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.

     



    To know more about it

    EX. VAT : 684,00 € INCL. VAT : 820,80 €

  • cutting plotter Secabo C60 IV Without base

    Product In stock

    Réf.:SCB_106.064.09_plotter c60IV

    This plotter is ideal for cutting a wide variety of materials, such as vinyl, the flex, the flock, With this plotter you can work with rolls up to 60 cm wide. The new CIV generation has many improvements compared to the CIII version: speed, cutting and pressure settings are more reliable, precise and efficient.

    The backlit screen makes it easier to use in everyday life.

    Equipped with a Lapos 2 sensor, you can also perform trimming of previously printed materials, for example to make stickers with the DrawCut PRO

  • Items included with the Secabo C60IV plotter
  • - Multilingual software DrawCut LITE (Windows) or Sign Cut in option (mac - one year licence)
    - 1 blade 30°
    - 1 blade holder
    - 1 pencil holder
    - 1 transport sheet A3
    - 1 power cable
    - User manual

    In option, the Drawcut Pro software (Windows) including the automatic vectorization of your files and the possibility to use the LAPOS XPT system for the clipping of your printed files (see video)

  • This plotter has many advantages!
  • - Easy installation for PC. No need to download additional drivers (works only with Windows 7, Windows 8, Windows 8.1, Windows 10 ( 32 and 64 bits )
    - Comfortable, illuminated, ergonomic keyboard with large keys
    - Easy to install USB interface
    - Possibility to use this plotter with Mac with SignCut software (without LAPOS). The license is valid for 1 year (on request)
    - A fast and improved reading of the marker crosses with the Lapos 2 software with DrawCut PRO

  • Our valuable advice
  • For a perfect hold of your cutting board, we recommend you to position your rollers at 1,5 cm from each end of the roll.


    Order your plotter on Créadhésif, and get a 5% discount on your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.

     



    To know more about it

    EX. VAT : 559,00 € INCL. VAT : 670,80 €

  • < -33

    in stock

    cutting plotter Secabo C30IV with markings

    cutting plotter Secabo C30 IV

    Product In stock

    Réf.:SCB_C30IV_106.066.09

    This plotter is ideal for cutting a wide variety of materials, such as vinyl , flex, flock, stencils, cardboard and paper ...
    With this plotter you can work with rolls up to 30 cm wide .
    The new generation CIV has many improvements compared to the CIII version: speed, cutting and pressure settings are more reliable, precise and efficient.

    The backlit screen makes it easier to use in everyday life .
    Equipped with a Lapos 2 sensor, you will also be able to perform trimming of previously printed materials, for example to make stickers with the DrawCut PRO.

  • Items included with the Secabo C30IV plotter
  • - Multilingual software DrawCut LITE (Windows) or Sign Cut in option (mac - one year licence)
    - 1 blade 30°
    - 1 blade holder
    - 1 pencil holder
    - 1 transport sheet A3
    - 1 power cable
    - User manual

    In option, the Drawcut Pro software (Windows) including the automatic vectorization of your files and the possibility to use the LAPOS XPT system for the clipping of your printed files (see video)

  • This plotter has many advantages!
  • - Easy installation for PC. No need to download additional drivers (works only with Windows 7, Windows 8, Windows 8.1, Windows 10 ( 32 and 64 bits )
    - Comfortable, illuminated, ergonomic keyboard with large keys
    - Easy to install USB interface
    - Possibility to use this plotter with Mac with SignCut software (without LAPOS). The license is valid for 1 year (on request)
    - A fast and improved reading of the marker crosses with the Lapos 2 software with DrawCut PRO

  • Our valuable advice
  • For a perfect hold of your cutting board, we recommend you to position your rollers at 1,5 cm from each end of the roll.


    Order your plotter on Créadhésif, and get a 5% discount on your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.

     



    To know more about it

    EX. VAT : 449,00 € INCL. VAT : 538,80 €

    GridView VueListe

    Articles 11 to 18 out of a total of 18

    Page :
    1. 1
    2. 2