Toute notre gamme de flex et de flock de découpe

Trouvez votre prochain Flex de Découpe !

 Le plus large choix de flex à portée de main

 

Le Flocage est une technique de personnalisation qui consiste à découper une matière thermocollante (qui se colle sous l'action de la chaleur) appelée Flex. Cette matière est ensuite transférée sur le textile à l'aide d'une presse à chaud. En flocage, vous découpez donc une couleur pleine. Autrement dit, pour avoir des visuels de plusieurs couleurs, vous devrez réaliser plusieurs découpes. C'est pour cette raison que nous avons référencé pour vous de nombreuses couleurs et de nombreux flex à effets pour vous permettre de créer des marquages uniques et colorés ! Pailletés, fluos, métallisés, … il y en a pour tous les goûts ! A votre tour de trouver le flex qui VOUS correspond !

 

Nos Flex de Couleurs

Nos Flex Pailletés

Nos Flock effet velours

 

Nos Flex Spécifiques

Nos Flex Métallisés

Nos Flex Créatifs

 

 

Comment choisir son Flex de Découpe ?

Avec tout ce choix, c'est normal d'être un peu perdu ! Il est important de choisir un Flex de Découpe adapté à votre projet créatif. Mais comment le choisir ? Ne paniquez pas, on vous explique tout dans une seule et même vidéo !

 

 

 Nos Fournisseurs de flex

Plutôt Flex Imprimables ?

 

Différent des flex de découpe, les flex imprimables s'utilisent avec une imprimante et des encres Solvant / Eco-Solvant. Grâce à ces produits innovants, vous pourrez réaliser sans limite des marquages en quadrichromie sur des textiles clairs ou foncés ; en coton, polyester ou d'autres matières synthétiques. Qu'ils soient classiques ou créatifs, découvrez toute une gamme de flex imprimables adaptée à vos besoins.

 

Nos Imprimables pour Textiles Foncés

Nos Imprimables pour Textiles Blancs

Nos Films de Transfert

 

Nos Imprimables Spécifiques

Nos Imprimables Compatibles Latex

Nos Imprimables Laser

GridView VueListe

Articles 11 to 20 out of a total of 52

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. < -2

    in stock

    Flex Adhesive CAD-CUT

    Flex Adhesive for foil - CAD-CUT Width 30 cm

    Product In stock

    Ref:CAD-CUT-30cm

    For a stunning effect, make incredible customizations by combining this adhesive flex with paper foil.

    In addition to embellishing your creations, this flex will protect your textile and allow your personalization to last a very long time.

    Tip Créadhésif : To obtain an iridescent effect, crumple your sheet of paper foil.
    Press your adhesive flex at 150°C for 5 seconds with medium pressure. Carry out hot peeling then place your sheet of paper foil on your support, press at 150°C for 10 seconds with strong pressure. The peeling is carried out cold.

     

    To know more about it
    EX. VAT : 49,92 € INCL. VAT : 59,90 €

  2. Siser Flex EasyWeed P.S FILM - Width 50cm

    Product In stock

    Ref:SSR_PS_EASYWEED

    This 90 micron thick Flex has a soft and very fine finish and is available in a wide range of colours. 

     Sa composition particulière permet la superposition de deux P.S. Film, ou de Flock sur P.S. Film, vous permettant ainsi de créer des visuels uniques et originaux avec une multitude de couleurs et d'effets. Facile à découper et écheniller, ce flex peut se peler à chaud ou à froid.

    This flex is particularly resistant to washing. It can be applied to cotton, polyester and poly/cotton textiles. Attention, it cannot be applied on treated, dyed or already sublimated textiles.

    This flex is certified OekoTex Standard 100.

    L'Astuce Créadhésif : Si vous souhaitez réaliser des superpositions avec l'EasyWeed, c'est possible. Nous vous conseillons dans ce cas de presser le premier flex à 160°C pendant 5 secondes.

    To know more about it
    EX. VAT : 2,07 € INCL. VAT : 2,49 €

  3. Siser Twinkle - Le Flex Pailleté au Toucher Lisse

    Product In stock

    SKU:SSR_TWINKLE

    With a thickness of 235 microns, the Twinkle flex is THE glitter flex with a smooth feel! The glitter is embedded directly into the flex for a very smooth finish. When exposed to sunlight, the effect is intensely shiny and reflective. Easy to cut and weave, it can be pressed in 15 seconds at 150°C. 

    It can be applied to cotton, polyester and poly/cotton textiles with a heat press or a simple iron. Please note that it cannot be applied on treated, dyed or already sublimated textiles.

    Tip Créadhésif : Before starting a production, always remember to carry out a test to find the right balance between pressure, time and heating temperature. 

    Layering Tip: You cannot layer another flex over the Flex Twinkle but it can be layered over other thin flexes.

    To know more about it
    EX. VAT : 6,20 € INCL. VAT : 7,44 €

  4. Siser P.S. Electric - Flex Film

    Product In stock

    Ref:SSR_PS_ELECTRIC

    This Flex has a soft and very fine finish and is available in 6 colors.

    Its particular composition allows the superposition of two P.S. Electric, or Flex PS Film on P.S. Electric, allowing you to create unique and original visuals with a multitude of colors and effects. The proposed electric colors are slightly metallic, they will allow you to bring luminosity and modernity to your creations. 

    Easy to cut and weed, this flex can be peeled hot or cold. It is particularly resistant to washing. It can be applied to cotton, polyester and poly/cotton textiles. Please note that it cannot be applied on treated, dyed or already sublimated textiles.

    This flex is certified OekoTex Standard 100.

    Made in Italy, this high quality flex offers you unmatched product quality.

    Tip Créadhésif : Before starting a production, always remember to carry out a test to find the right balance between pressure, time and heating temperature. 

    To know more about it
    EX. VAT : 3,75 € INCL. VAT : 4,50 €

  5. Siser Flex Easy Patterns

    Product In stock

    Ref:SSR_EASY_PATTERNS

    With a thickness of 90 microns, Easy Patterns flex has a very soft and fine finish. A wide range of patterns is available to allow you to create unique and original designs. Easy to cut and weed, it presses in 15 seconds at 155°C. 

    It can be applied to cotton, polyester and poly/cotton textiles. Please note that it cannot be applied to treated, dyed or already sublimated textiles.

    Ce flex bénéficie de la certification OEKO-TEX®.

    Important : il est nécessaire d'utiliser le tape TDD Easy Siser vendu sur notre site pour transférer ce flex sur le support textile.

    Attention : ce produit est actuellement en transition. Siser vous propose désormais un flex Easy Patterns doté d'un liner, qui se découpe en mode miroir comme un flex standard, et qui ne nécessite pas de tape de transfert.

    Tous les flex de la gamme Easy Patterns n'ont pas encore été remplacés, pour l'instant ce changement concerne uniquement le coloris Arc-en-Ciel aquarelle. Pensez à vérifier votre flex avant de lancer une production. Le nouveau flex Easy Patterns est doté d'un liner et possède un côté brillant contrairement à l'ancienne version.

    Tip Créadhésif : Before starting a production, always remember to carry out a test to find the right balance between pressure, time and heating temperature. 

    To know more about it
    EX. VAT : 3,25 € INCL. VAT : 3,90 €

  6. Siser Flex Holographic

    Product In stock

    Ref:SSR_HOLOGRAPHIC

    With a thickness of 105 microns, the Holographic Crystal flex has a very soft and fine finish. Perfect for recreating the rhinestone effect, create unique and original visuals. Easy to cut and weave, it can be pressed in 15 seconds at 155°C. 

    It can be applied to cotton, polyester and poly/cotton textiles. Please note that it cannot be applied to treated, dyed or already sublimated textiles.

    Tip Créadhésif : Before starting production, always test to find the right balance between pressure, time and temperature.

     
    To know more about it
    EX. VAT : 2,92 € INCL. VAT : 3,50 €

  7. Flex Brick Siser - 50 cm wide

    Product In stock

    Ref:SSR_BRICK

    Siser Brick is the ideal flex to give your creations a 3D effect. Indeed, this very thick flex will bring relief and originality to your creations.

    With a thickness of 1000 microns, it is particularly popular on thick knits, such as sweatshirts and for large lettering.
    It can be cut and weeded very easily while offering great resistance to washing. It can be applied on cotton, polyester and polycotton.

    This REACH compliant flex is certified Oeko-Tex® Standard 100 Class II. 

    Available while stocks last. This reference will soon be replaced by the Flex Brick Siser in 600 mm.  

    TipCréadhésif : We recommend using this flex with a 60 degree blade for large lettering cuts. We do not recommend it for fine details. Letters should be cut at least 2 cm high.

    To know more about it
    EX. VAT : 4,92 € INCL. VAT : 5,90 €

  8. Siser P.S Stretch - Stretch Flex

    Product In stock

    Ref:SSR_PS_STRETCH

    Ce Flex d'une épaisseur de 90 microns, possède une finition douce, fine et élastique. Sa composition élastique le rend extrêment résistant à l'étirement. Le Siser Stretch est donc idéal pour les vêtements de sport (sauf nylon et tissus enduits).

    Facile à découper et écheniller, il peut se peler à chaud ou à froid. Il peut être appliqué sur les textiles en coton, polyester et poly / coton, et élasthanne. Attention, il ne peut pas etre appliqué sur des textiles traités, teints ou déjà sublimés.

    Siser Stretch is REACH compliant and is VEGANOK and Oeko-Tex®Standard 100 Class I certified.

    L'Astuce Créadhésif : Avant de lancer une production, pensez à toujours réaliser un test afin de trouver le juste équilibre entre la  pression, le temps et la température de chauffe. 

    To know more about it
    EX. VAT : 2,32 € INCL. VAT : 2,79 €

  9. Flex PS Perfor Siser Width 50 cm

    Product In stock

    Ref:SSR_PS_PERFOR

    The PS Perfor is the ideal flex to make markings on sports jerseys or to give an original effect to your creations. Indeed, this perforated flex has uniform holes of 1,5 mm on the whole surface. The perforation of the flex allows the textile to "breathe" while giving a unique effect to your t-shirt. It will allow you to obtain a professional result with bright and vivid colors.

    This plastic flex is slightly adhesive and can be cut and slit easily. It is available in 5 colors: white, navy blue, royal blue, red and black. The material is very resistant to washing and can be applied to all types of textiles: cotton, polyester, polymaterials, all colors. 

    It can be used for flex overlay. 

    This flex is REACH compliant andis certified Oeko-Tex® Standard 100 Class I

    L'Astuce Créadhésif : avant de lancer une production, pensez à toujours réaliser un test afin de trouver le juste équilibre entre la pression, le temps et la température de chauffe. Pour de meilleurs résultats, nous suggérons de stocker le produit à l'abri de la lumière du soleil et de la poussière, position verticale et à des températures comprises entre 18°C et 26°C.

    To know more about it
    EX. VAT : 3,75 € INCL. VAT : 4,50 €

  10. < -2292

    in stock

    Poli-Flex Turbo

    Poli-Flex Turbo - Pressing in 3 or 5 seconds at 130°C or 160°C - 30cm roll

    Product In stock

    SKU:PLT_POLI_FLEX_TURBO_30cm

    Ce film en polyuréthane fin, souple et élastique vous permettra de réaliser tous vos transferts en 3 à 5 secondes !

    Adapté à tout types de textiles comme le coton, le polycoton et le polyester,il vous offre un large choix de coloris. Ce flex est idéal pour réaliser des logos et marquages en 3 ou 4 couleurs et réaliser des créations sur tee-shirts, tote bag, sweats pour une utilisation quotidienne. Il offre, également une finition lisse mate, avec un rendu sérigraphique et une excellente opacité. De plus, son liner très adhésif thermofusible, vous permettra de réaliser la découpe de petits motifs avec un échenillage très aisé.

    There are 3 types of Poli-Flex: classic, metallic, neon

    Ses + Produits: 
    - Une véritable finition mate, un rendu bluffant !

    - Ne nécessite pas une forte pression , 2,5 / 3 bars suffisent, ce qui évite les soucis de marque de la presse sur le textile après transfert 
    - La possiblité de réaliser un pressage en express : 160°C pendant 3 secondes ou 130°C pendant 5 secondes selon les matières
    - Un liner de 100 microns qui permet une marge d'erreur plus importante au moment de la découpe au plotter
    - Un flex d'une grande résistance qui passe au sèche linge (à l'envers)
    - Un flex qui ne retient pas les "peluches" des textiles
    - Le + produit : ce flex répond aux normes Oekotex Class 1 et bénéficie du label "Vegan". 

    Please note: This product has been awarded the Craft Master Distributor certificate, which guarantees the highest quality of products delivered, professional technical support and availability of products at a fair price. 

    Tip CréadhésifTo achieve overlays with Poli-Flex Turbo, we recommend pressing the last color at 150°C for 10 seconds and removing the liner when cold. This is to avoid premature delamination of the flex.

    To know more about it
    EX. VAT : 1,21 € INCL. VAT : 1,45 €

GridView VueListe

Articles 11 to 20 out of a total of 52

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5