DTF Powdering and Drying Machine

The DTF printing technique consists of 3 steps: printing on a film, depositing the hot melt powder and and drying. Our dryers with drying tunnel will allow you to automate the last two steps for roll-to-roll printing. The powder is deposited evenly on your film and a collector allows the powder to be collected for reuse. This will drastically reduce powder wastage and save valuable production time.

GridView VueListe

Items 1 to 10 out of a total of 16

Page :
  1. 1
  2. 2
  1. < -5

    in stock

    Rotating blade for dtf powder

    Blade for DTF 60cm Silicone Powder Blaster

    Product In stock

    SKU:ZHS_LAME_POUDREUSE

    After many productions, the silicone blade used to remove the excess powder at the time of powdering eventually wears out and becomes less effective.

    Don't panic, you can easily change it for a new one.

    These blades are only used on our machines and are not compatible with other materials. They are suitable for :

    - 60cm powdering machine for 2 heads printer
    - 60cm powdering machine for 4 heads printer

    To know more about it
    EX. VAT : 40,83 € INCL. VAT : 49,00 €

  2. < 6

    in stock

    DTF Powder Shovel - 400 grams -260mm

    Product In stock

    Ref:PELLE_260MM
    To make reloading with DTF powder easier, we offer this aluminium scoop. The scoop is 260mm long and can load about 400 grams of DTF powder in one go. We recommend it for 30cm printers and powder machines. Read more about this product
    EX. VAT : 10,75 € INCL. VAT : 12,90 €

  3. < 2

    in stock

    DTF Powder Shovel - 600 grams - 350mm

    Product In stock

    Ref:PELLE_350MM
    To make reloading with DTF powder easier, we offer this aluminium scoop. The scoop is 350mm long and can load about 600 grams of DTF powder in one go. We recommend it for 60cm printers and powder machines. Read more about this product
    EX. VAT : 13,25 € INCL. VAT : 15,90 €

  4. < 2

    in stock

    Extractor TS100

    Smoke Extractor TS100 - DTF Printer 60cm in 4 heads

    Product In stock

    SKU:ZHS_TS100

    Smoke Purifier 375W for DTF Machine.

    If you are using a DTF solution and do not have a dedicated outlet to the outside, you will need one of our extractors. They allow you to suck up the fumes released by the powder.

    The TS100 extractor fits on all DTF large size powder machines of 60 cm - 4 heads. You can use it simultaneously on 2 powder machines of 60 cm - 2 heads. It is supplied with 2 filters: an activated carbon filter and a paper filter. 

    Very easy to use, you just have to connect the extractor hose to your powder machine and the purifier will suck up the fumes.

    Product Benefits:
    -
    Sucks up 8m3/min
    - Compatible with large powder magazines
    - Easy to use
    - Purifier on wheels for easy movement

    To know more about it
    EX. VAT : 1 408,33 € INCL. VAT : 1 690,00 €

  5. < 4

    in stock

    Smoke extractor TS50

    Smoke Extractor TS50 - DTF Printer 60cm in 2 heads

    Product In stock

    SKU:ZHS_TS50

    100W Smoke Purifier for DTF Machine.

    If you are using a DTF solution and do not have a dedicated outlet to the outside, you will need one of our extractors. They allow you to suck up the fumes released by the DTF powder.

    The TS50 extractor fits DTF 60 cm - 2 print heads. It is also supplied with 2 filters: an activated carbon filter and a paper filter. 

    Very easy to use, you just have to connect the extractor hose to your powder machine and the purifier will suck up the fumes.

    Product Benefits:
    -
    Sucks up 170m3/h
    - Compatible with small & medium sized powders
    - Easy to use
    - Purifier on wheels for easy moving

    To know more about it
    EX. VAT : 1 158,33 € INCL. VAT : 1 390,00 €

  6. < 3

    in stock

    Conveyor belt for dtf powder

    High temperature conveyor belt for DTF powdering machine

    Product In stock

    SKU:ZHS_TAPIS_PTFE

    Need to change the conveyor belt of your powder machine?

    We offer a replacement mat made of PTFE coated glass cloth. The mesh of the mat is open to allow easier curing of the powder and evacuation of the fumes.

    The "alligator" joint allows you to easily attach the mat with a simple metal rod (supplied with the mat).

    The silicone strip on the side of the mat provides an excellent guidance system.

    Our mats are only compatible with our DTF equipment.

    To know more about it
    EX. VAT : 325,00 € INCL. VAT : 390,00 €

  7. < -7

    in stock

    Smoke Extractor 80W

    Product In stock

    Reference:ADL_EXTRACTEUR_80W

    Smoke extractor 80W for DTF machine.

    This air extractor is suitable for all DTF small size powder machines (30CM).

    Very easy to use, you just have to position the extractor pipe above the flue of your powder machine and the extractor will suck the fumes. 

    Product benefits:
    - Compatible with small powder machines
    - Easy to use
    - Purifier on wheels for easy movement
    - Air volume: 180 m³/H

    To know more about it
    EX. VAT : 325,00 € INCL. VAT : 390,00 €

  8. Poudreuse CT600s 60 cm Ultra Rapide et séchage - Pour imprimante DTF 4 têtes

    Product In stock

    Réf.:ZHS_H6501

    Discover one of our latest products: the DTF (Direct To Film) printer!

    The DTF technique is as simple as its name suggests and consists of just a few steps. Once your visual has been printed on the film, apply a layer of hot melt powder to it, before drying and pressing it.

    Thanks to this powder printer, you can make high-quality markings at a lower cost! With a width of up to 60cm, it is suitable for all sizes! It will allow you to apply powder evenly and without gaps on your film. This is the fastest and most efficient machine on the market.
    This powder applicator is recommended for DTF 4 head printers!

    Product benefits:
    - Universal compatibility
    - Easy to use and less labour intensive
    - No need for cutting
    - No waste thanks to the powder collector
    - No border
    - Has a heating tray to dry the powder after deposition

    This product is available for pre-order! So don't wait any longer and be the first to equip yourself with a DTF!

    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés.

    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés.

    To know more about it
    EX. VAT : 6 650,00 € INCL. VAT : 7 980,00 €

    Delivered within 1 to 3 days

  9. Poudreuse CT600 60 cm et séchage pour transfert DTF

    Product In stock

    Réf.:ZHS_H650

    Discover one of our latest products: the DTF printing powder for roll-to-roll printing!
    The DTF technique is as simple as its name suggests and consists of just a few steps. Once you have printed your visual on the film, apply a layer of hot melt powder to it, dry it and press it onto the textile substrate.

    With this powder printer, you can achieve high-quality markings at a low cost! With a width of up to 60cm, it is suitable for all sizes! It will allow you to apply powder uniformly and professionally to your film. With this powder applicator, you are sure to get a fine, precise and perfect result!

    The machine is equipped with 4 height adjustable feet and also 4 castors for ease of movement.

    Product benefits:
    - Universal compatibility
    - Easy to use and less labour intensive
    - No need to cut
    - No waste thanks to the powder collector
    - No edge
    - Has a heating tray to dry the powder after deposition

    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés.

    To know more about it
    EX. VAT : 5 233,33 € INCL. VAT : 6 280,00 €

    Delivered within 1 to 3 days

  10. < 2

    in stock

    30 cm DTF transfer powdering machine

    new ! CT300 30 cm powder and drying machine for DTF transfer

    Product In stock

    Article number: powder_30cm

    Discover one of our latest products: the DTF printing powder for roll-to-roll printing on a maximum media width of 30cm!

    The DTF technique is as simple as its name suggests and consists of just a few steps. Once your design has been printed on the film, apply a layer of hot melt powder to the film, dry it and press it.

    With this powder applicator, you can achieve high quality markings at low cost! With a width of up to 30cm, it is suitable for A3 and A4 formats! It will allow you to apply powder evenly and without gaps on your film.

    The machine is equipped with a table for the installation of the printer and also with a roll holder.
    From the print output

     Product benefits:
    - Universal compatibility
    - Easy to use and less labour intensive
    - No need to cut
    - No waste thanks to the powder collector
    - No edge
    - Has a heating plate to dry the powder after deposition

    Box size: 120 x 71 x 88cm
    Powder box size (when mounted): 172 x 60 x 75cm

    Box weight: 130Kg
    Machine weight: 100Kg

    Power supply: 220V - 13A
    Consumption: 1KW - 2.3KW

     

    Cet article ne peut pas être expédié en express. Merci de ne pas choisir ce mode de livraison. La livraison peut prendre 4 à 5 jours ouvrés.

    To know more about it

    Normal price : 2 490,00 €

    Special Price EX. VAT : 1 658,33 € INCL. VAT : 1 990,00 €

    Delivered within 1 to 3 days

GridView VueListe

Items 1 to 10 out of a total of 16

Page :
  1. 1
  2. 2