You have a project and you don't know which material to choose? Do you have a question about one of our products or need technical advice? Créadhésif has set up a free telephone number to allow you to speak with our advisers and thus refine your project. Our team is there to answer all your questions, advise you and give you tips to get you off to a good start. Once your order has been received, you can also contact us for advice on the installation and use of equipment and consumables. Our Technical Hot Line is at your disposal: from Monday to Friday from 10am to 12pm and from 2pm to 5pm on 01 34 33 01 55 (free number).
Customer Comments
notice
hello, works well after having found the operation because no notice received !!!! this is the thing that I would have reproached no instructions received or none on the site apart from it produced at the top
my brother printer HL-L3230CDW nickel copy
Very good product
Works very well with an oki833 printer provided you have the correct printer and press settings. Very satisfied with the rendering.
good touch on cotton and polyester
good paper, after some research on youtoube and the after-sales service which advised me I finally understood the technique for the installation, it is good once you have well adjusted the printer and your press after all is done normally, great for the reasons with gradient or that one cannot scale.
Bravo
All right.
very good product Thank you
Thank you
Good product
Perfect printing (after a few adjustments) on HP Pro 200
More delicate pose.
After testing (see previous comment) the result is very good.
Much better than Chromablast!
Good impression
After a few tests, I managed to understand how it works! The instructions in English are not very good, so to tell you how to do it, you need to read these instructions:
- raise the temperature to 180/185
- fairly strong pressure
- 15 seconds pressing time
- leave the garment in the press while wiping it with a cloth to cool it down.
- take it off right away afterwards or the paper will stay stuck!
- re-press 15 seconds with sulfur paper to fix it !
AT THE TOP !!!!
VERY HAPPY WITH THE PRODUCT AND FAST DELIVERY.
REALLY SHABBY
The result is really lousy for the price, I do not recommend this product at all.
Deplorable
Not compatible with HP Laser printers ( 3 different tested)
The after-sales service that clearly thinks I'm an idiot by telling me I must have printed on the wrong side. Then they tell me to send an email with the pictures... thank you but there is no email in the contact us form.
And to finish, when I find a compatible laser printer, IMPOSSIBLE to apply the transfer!! The manual indicates 30 seconds at 180° with a maximum of pressure. I gave up on the 4th T-shirt I threw in the trash!
60€ of transfer + 4 t-shirts at 5€ in the trash, and to finish I went to buy some transfer papers at the hypermarket in the corner.
Honestly, it sucks!
quality not optimum
Acceptable results, operating instructions not in accordance with the paper.
Ask the service department for the new operating instructions.
Does not work with all laser printers
Test on a Xerox Phaser 6140, with all existing paper profiles in the printer.
The result is not acceptable. Despite following the manufacturer's instructions.
Even foresee possible damage to the printer.
No list of compatible printers at the manufacturer, see the phaser 6140 is not compatible.