Papier transfert laser CMJN

GridView VueListe

Articles 21 to 23 out of a total of 23

Page :
  1. 1
  2. 2
  3. 3
  1. < -16

    in stock

    Papier Multi-Trans Pro Format A3

    Product In stock

    Ref:FRV_MULTITRANS_PRO

    The Multi-Trans PRO paper can be used on any type of laser printer. With this paper, you can easily personalize hard surfaces such as wood, paper, cardboard, cork and much more.

    With a very short press time at low temperature, you can heat peel your Multi-Trans PRO, making it one of the most efficient products on the laser transfer market. Produce an infinite variety of media for all types of events, weddings, restaurant or interior decoration, festivals ...

    This paper is applicable on Wood, Paper, Card, Metal, Mirrors, Glass, Leather, Cork

    Applications: Cups , Paper bags, Wooden products, Coasters, Towels, Face masks (1 use), Plastic cups (PP), Book covers;...

    1 pack = 100 sheets

    Steps for use : 

    1. Pre-press your product with the settings in the table below.
    2. Place your design on your substrate/product (printed side down) and if necessary,
    secure it with high temperature tape.
    3. Press your transfer with the settings shown below and cover it with the
    silicone pads in the table below.
    4. Peel off the transfer paper using the recommended settings in the table below.
    CAUTION: At this point, the media is very hot. Take care when handling it.
    5. If indicated in the table below, press your product again at the same temperature as in step 3 for approximately 2 to 5 seconds.

    To know more about it
    EX. VAT : 154,17 € INCL. VAT : 185,00 €

  2. < -6

    in stock

    Forever - Flex soft ( No cut ) - Sample pack

    PREMIUM Flex Soft Sample Kit (No-Cut)

    Product In stock

    SKU:FRV_FLEX_SOFT_PREMIUM

    This new paper allows a fast and efficient production, without having to invest in a new specific printer or in a cutting plotter !

    Its strong points:

    - Without cutting, without weeding

    - Low installation temperature of 100-160°C
    - Transfer on almost all textile substrates and on different materials (cotton, mixed fabric, polyester, nylon, polypropylene, paper, wood, etc.).
    - For black/white or CMYK Laser/LED printers and copiers
    - Resistant to washing up to 40°.
    - Complicated patterns and fine details can be transferred without any problems.
    - Enormous time saving
    - Great possibilities in the elaboration of designs and patterns (Vintage, Worn Look, Fashion, Vector)
    - Available in A3 & A4

    See the Description tab below for the precise composition of this kit.

     Tip Créadhésif :Choose a printout with a flatbed, choose the "multifunction tray". Otherwise your paper may be scratched and damaged by the passage through the printer.

    To know more about it
    EX. VAT : 32,50 € INCL. VAT : 39,00 €

  3. Sample Kit BASIC Flex Soft (No-Cut)

    Product In stock

    SKU:FRV_FLEX_SOFT_BASIC

    This new media allows for fast and efficient production without having to invest in a new specific printer or a cutting plotter

    Its strengths:

    - No cutting, no weeding

    - Low installation temperature of 100-160°C
    - Transfer on almost all textile substrates and on different materials (cotton, mixed fabric, polyester, nylon, polypropylene, paper, wood, etc.).
    - For black/white or CMYK Laser/LED printers and copiers
    - Resistant to washing up to 40°.
    - Complicated patterns and fine details can be transferred without any problems.
    - Enormous time saving
    - Great possibilities in the elaboration of designs and patterns (Vintage, Worn Look, Fashion, Vector)
    - Available in A3 & A4

    Tip Créadhésif :Choose a printout with a flatbed, choose the "multifunction tray". Otherwise your paper may be scratched and damaged by the passage through the printer.

    See the Description tab below to know the precise composition of this kit.

    To know more about it
    EX. VAT : 20,83 € INCL. VAT : 25,00 €

GridView VueListe

Articles 21 to 23 out of a total of 23

Page :
  1. 1
  2. 2
  3. 3