Press Accessories

Créadhésif vous propose un large choix d'accessoires qui sauront s'adapter à votre presse chaud.
Vous retrouvrez ainsi des plateaux interchangeables, des accessoires en téflon, des accessoires en silicone, ...




Find many explanations, tips and tricks via our video tutorials on our channel YouTube : Créadhésif ! You can also subscribe to one of our Webinars (Support category on our website).

GridView VueListe

Items 1 to 10 out of a total of 89

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. < 7

    in stock

    Coussins en téflon kit 4 tailles

    Teflon cushions - kit 4 sizes

    Out of stock

    Réf.:KIT_coussin_téflon

    Pour protéger tous vos vêtements et tissus lors du processus du transfert à chaud, et obtenir un rendu de qualité professionnelle, adoptez nos coussins en téflon ! Ces coussins peuvent être utilisés de nombreuses fois. 

    Ce kit de quatre coussins permet de réaliser des transferts en toute simplicité aussi bien sur des manches et des t-shirts enfants que sur des t-shirts taille XXL.
    Un kit indispensable pour obtenir un transfert de qualité sur tous types de textiles.


    Protection et qualité garantie !

    L’Astuce Créadhésif : Si vous réalisez du transfert sur des textiles qui ont des boutons, placez votre coussin à l’intérieur du vêtement de façon à obtenir une pression plus uniforme et ainsi un rendu de bien meilleure qualité. Ces coussins sont particulièrement recommandés pour le flockage textile.

    To know more about it
    EX. VAT : 51,62 € INCL. VAT : 61,95 €

  2. < -31

    in stock

    Surface cleaner

    Product In stock

    Article number: SPX_surface cleaner pro orange

    This product is strictly forbidden in delivery BY PLANE for DOM-TOM and international countries. Any material or merchandise considered dangerous is forbidden in the hold or cabin (e.g. all gas cylinders, industrial lacquers, varnishes or paints and chemical products).

    The surface cleaner,
    Surface Cleaner Pro is a highly effective biochemical cleaner, developed for the pre-treatment of surfaces to which adhesive films are to be applied. The latest glass coatings and lacquer systems have the highest demands on surface cleaners in order to ensure optimal adhesion between the surface and the adhesive. All surfaces should be considered dirty and/or contaminated. Unwanted waxes and silicone particles, although not visible to the naked eye, can completely deteriorate the adhesion qualities. The total covering of vehicles requires a lot of adhesive films, therefore it is essential to pay a lot of time and attention to the surface preparation phase. Therefore, we recommend the use of Surface Cleaner Pro for a thorough cleaning before each application.

    To know more about it
    EX. VAT : 14,96 € INCL. VAT : 17,95 €

  3. Cleaning Stick for heat press

    Product In stock

    Réf.:STH_STICK_CLEAN_013690

    Entretenez et nettoyez votre presse grâce à ce stick nettoyant Stahls !

    Ce stick vous permettra de retirer tous les résidus d'encre et les dépôts collés au plateau chauffant supérieur. Pour un résultat optimal, vous devrez utiliser ce nettoyant régulièrement.

    Evitez également de tâcher vos supports lors du pressage.

    Conseils d'utilisation :
    1. Faites chauffer votre presse à chaud à 140°
    2. Appliquez le nettoyant avec parcimonie sur le plateau chauffant supérieur et laissez agir quelques secondes
    3. Frottez votre presse avec un chiffon pour nettoyer l'ensemble du plateau

    A delay of one week may apply to this product.

    To know more about it
    EX. VAT : 5,75 € INCL. VAT : 6,90 €

  4. 40x50 heating plate for Secabo modular press

    Product In stock

    Réf.:SCB_992.90005021.01

    Heating tray 40x50 cm for heat press Secabo Modular (old model).

    If in doubt, please send us your press serial number for verification.

    To know more about it
    EX. VAT : 217,50 € INCL. VAT : 261,00 €

  5. Press Controller TC Smart Secabo

    Out of stock

    Ref:SCB_HPC01_Controller TC Smart

    Controller heat press Secabo Tc Smart

    To know more about it
    EX. VAT : 270,83 € INCL. VAT : 325,00 €

    Delivered within 15 days

  6. < -1

    in stock

    Carte de puissance 11586 - PB01 rev 11-Ste_ TC Smart Secabo

    Carte pour contrôleur TC Smart Secabo

    Product In stock

    Réf.:SCB_Carte HPC01_100.991.11586.03

    Carte de puissance 11586 - PB01 rev 11-Ste pour Presse à chaud Secabo Tc Smart

    To know more about it
    EX. VAT : 141,67 € INCL. VAT : 170,00 €

    Delivered within 15 days

  7. 2 in 1 Tray Special Labels Stahls

    Product In stock

    Ref:STH_PLTAGA

    Have you been dreaming of a tray that personalizes the front and inside of the shirt simultaneously? Stahls has designed it for you! 

    With this latest innovation, you will save precious time when making all your textile markings. In addition to your usual markings, you can also put your name or brand on the inside of your textiles, which is intended for labels.

    The 40 x 50 cm table top is compatible with the following Stahls presses: Maxx Clam (40 x 50 cm), Hotronix 40 x 50 cm Auto Clam, Hover, Fusion IQ, Air Fusion IQ, Dual Air Fusion IQ and Table Top Air Fusion IQ models.

    Strong and sturdy, this aluminum tray has a thick silicone foam.

    L'Astuce Créadhésif : si vous avez sur votre textile une fermeture éclair ou des boutons, pensez à utiliser un coussin en téflon au moment du pressage. Vous éviterez ainsi de rayer le plateau supérieur de votre presse. 

    To know more about it
    EX. VAT : 389,00 € INCL. VAT : 466,80 €

  8. < 2

    in stock

    Temperature tests for heat press

    Kit 10 Temperature Test Strips

    Product In stock

    Réf.:STH_THERMOTAPE_013688

    These strips will allow you to check whether the temperature of your press is homogeneous over the entire surface of the platen. This will enable you to carry out an efficient hot pressing. The kit contains 10 disposable strips.

    How to use them?
    1
    . Heat your press to 180°C
    2
    . Place your strips on the tray
    3. Press for 8 seconds at 180°C
    4. Look at the temperature indicated on the strips and adjust your press if necessary

    Tip Créadhésif : We recommend that you place three strips at different places on the tray: bottom, middle and top. This will ensure that there are no failures in the heating plate and position your customised media in the best possible way.

    To know more about it
    EX. VAT : 15,83 € INCL. VAT : 19,00 €

  9. Bottom tray for multiple STAHLS caps

    Product In stock

    SKU:STH_PLHBILL

    Lower tray for caps.

    Customize your cap visors easily with this interchangeable bottom tray.

    Place your cap visor in the space provided with a protective sheet over it and press!

    Tip Créadhésif You can customize the inside and outside of the visor.

    Compatible with the following presses:
    - Air Fusion / Fusion IQ / Table Top
    - Dual Air Fusion / Air Fusion IQ
    - Fusion / Fusion IQ Heat Press
    - Auto Clam / Hover Press
    - MAXX Clam

    To know more about it
    EX. VAT : 208,32 € INCL. VAT : 249,99 €

    Ships within 2 to 3 days

  10. Laser de positionnement modulaire 1 diode sur table

    Out of stock

    Reference:SCB_109.510.200

    Finally a modular laser that adapts to your equipment and your creations!

    With this positioning laser, you can quickly and accurately place your logo on your textile.
    Save time and money by limiting costly mistakes.

    To do this, position the laser next to your press. Then all you have to do is place your design in the corner of the cross formed by the laser.

    The advantage of this laser is that you can modify it according to your needs: add a diode, increase the size of the laser with an additional vertical bar, etc.

    To know more about it
    EX. VAT : 155,00 € INCL. VAT : 186,00 €

GridView VueListe

Items 1 to 10 out of a total of 89

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5