Sublimation accessories

Find all the necessary equipment to create your prints for sublimation on white cotton textiles (Chromablast) as well as on white polyester textiles and sublimable objects (Sublijet)! Discover our different sublimation accessories, to help you in your activity and in the realization of textiles or personalized objects. We offer a wide range of teflon sheets, high temperature tape, heat-shrinkable films, etc... You can also find accessories for more specific creations, especially on mugs, cups, flasks, etc.

Find many explanations, tips and tricks via our video tutorials on our channel YouTube : Créadhésif ! You can also subscribe to our various Free online training (Webinar). Register now in the Support section of our website.


GridView VueListe

Articles 41 to 50 out of a total of 54

Page :
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. Roll of high temperature tape 10 mm

    Product In stock

    Ref:SCOTCH_HT_CUIVRE

    Roll of high temperature resistant scotch tape to fix your images on its support to sublimate.

    Dimensions:
    - Length: 33 m
    - Width : 10 mm

    To know more about it
    EX. VAT : 4,96 € INCL. VAT : 5,95 € incl. VAT : From 4,90 €

  2. Anti Yellowing Felt Coil

    Out of stock

    Ref:FRV_FEUTRINE_ANTI_YELLOWING

    Protection against yellowing of white textiles during the transfer process.

    Felt is used for longer presses, strongly recommended when applying FOREVER paper.

    Dimensions
    Width: 45 cm
    Length: 100m

    To know more about it
    EX. VAT : 125,00 € INCL. VAT : 150,00 €

  3. < 8

    in stock

    sleeve Conical mug 12 oz

    Product In stock

    SKU:BST_KLBJ-12

    Discover our sleeve specially designed for the sublimation of 12 oz. conical mugs. This very easy to use sleeve can be used with a traditional rotary heat oven, or a 3D oven.
    With this new sublimation technique, you will be able to sublimate the entire surface of your mugs. A revolution in polyester sublimation!
    3D sublimation is a technique that allows you to personalize all types of objects; phone cases Iphone, mugs, glasses, plates, photo frames, textiles, ceramic tiles ... Don't wait any longer, adopt this new sublimation technique which is simple, fast and adapted to all types of supports.
    This technique has many advantages and will allow you to save precious time. Try it, you will be seduced!

    The + of the Product: is that you will be able to sublimate up to 12 mugs in one go. thanks to the 3D oven ! For this, it is necessary to have several mug sleeves.

    Tip Creadhesive: Use duct tape to fix your printed visual on your mug, before inserting it into the mould. Leave your mugs in an oven at 200° for 8 minutes.

    To know more about it
    EX. VAT : 14,12 € INCL. VAT : 16,95 €

  4. sleeve 16 oz conical mug

    Product In stock

    Ref:ZBO_Manchette pour Mugs coniques 16 oz

    Discover our sleeve specially designed for the sublimation of 16 oz. conical mugs. This very easy to use sleeve can be used with a traditional rotary heat oven, or a 3D oven.

    With this new sublimation technique, you will be able to sublimate the entire surface of your mugs. A revolution in polyester sublimation!

    3D sublimation is a technique that allows you to personalize all types of objects; phone cases Iphone, mugs, glasses, plates, photo frames, textiles, ceramic tiles ... Don't wait any longer, adopt this new sublimation technique which is simple, fast and adapted to all types of supports.
    This technique has many advantages and will allow you to save precious time. Try it, you will be seduced!

    The + of the Product: is that you will be able to sublimate up to 12 mugs in one go. thanks to the 3D oven For this, it is necessary to have several mug sleeves.

    Tip Creadhesive: Use duct tape to fix your printed visual on your mug, before inserting it into the mould. Leave your mugs in an oven at 200° for 8 minutes.

    To know more about it
    EX. VAT : 15,79 € INCL. VAT : 18,95 €

  5. sleeve for 15 oz conical mugs

    Out of stock

    SKU:XNH_conic 15oz green wand

    Discover our sleeve specially designed for the sublimation of 15 oz conical mugs. This sleeve is very easy to use and can be used with a traditional oven with rotating heat, or a 3D oven.

    With this new sublimation technique, you will be able to sublimate the entire surface of your mugs. A revolution in polyester sublimation!

    3D sublimation is a technique that allows you to personalize all types of objects; phone cases Iphone, mugs, glasses, plates, photo frames, textiles, ceramic tiles ... Don't wait any longer, adopt this new technique of sublimation which is simple, fast and adapted to all types of supports.
    This technique has many advantages and will allow you to save a precious time. Test it, you will be seduced!

    The + of the Product: is that you will be able to sublimate up to 12 mugs in one go. thanks to the 3D oven For this, it is necessary to have several mug sleeves.

    Tip Creadhesive: Use duct tape to fix your printed visual on your mug, before inserting it into the mould. Leave your mugs in an oven at 200° for 8 minutes.

    To know more about it
    EX. VAT : 15,79 € INCL. VAT : 18,95 €

  6. < -5

    in stock

    sleeve 3D Mug 15 oz

    Product In stock

    SKU:XNH_MANCHETTE_15OZ

    Discover our 3D sleeve specially designed for the 3D sublimation of 15 oz mugs. This very easy to use sleeve can be used with a traditional oven with rotating heat, an oven or a 3D oven.

    With this new sublimation technique, you will be able to sublimate the entire surface of your mugs. A revolution in polyester sublimation!

    3D sublimation is a technique that allows you to personalize all types of objects; phone cases Iphone, mugs, glasses, plates, photo frames, textiles, ceramic tiles ... Don't wait any longer, adopt this new sublimation technique which is simple, fast and adapted to all types of supports.
    This technique has many advantages and will allow you to save precious time. Try it, you will be seduced!

    The + of the Product: is that you will be able to sublimate up to 12 mugs in one go. thanks to the 3D oven For this, it is necessary to have several mug sleeves.

    Tip Creadhesive: Use high temperature scotch tape to fix your printed visual on your mug, before inserting it into the mould. Leave your mugs in an oven at 200° for 8 minutes.

    To know more about it
    EX. VAT : 17,46 € INCL. VAT : 20,95 €

  7. sleeve 3D Mug 11 oz

    Out of stock

    SKU:BST_PJB9-N

    Discover our 3D sleeve specially designed for the 3D sublimation of 11 oz mugs. This very easy to use sleeve can be used with a traditional rotary heat oven, or a 3D oven.

    With this new sublimation technique, you will be able to sublimate the entire surface of your mugs. A revolution in polyester sublimation!

    3D sublimation is a technique that allows you to personalize all types of objects; phone cases Iphone, mugs, glasses, plates, photo frames, textiles, ceramic tiles ... Don't wait any longer, adopt this new sublimation technique which is simple, fast and adapted to all types of supports.
    This technique has many advantages and will allow you to save precious time. Try it, you will be seduced!

    The + of the Product: is that you will be able to sublimate up to 12 mugs in one go. thanks to the 3D oven For this, it is necessary to have several mug sleeves.

    Tip Creadhesive: Use duct tape to fix your printed visual on your mug, before inserting it into the mould. Leave your mugs in an oven at 200° for 8 minutes.

    To know more about it
    EX. VAT : 15,79 € INCL. VAT : 18,95 €

  8. < -6

    in stock

    sleeve 3D Conical Mug 11 oz

    Product In stock

    SKU:XNH_conic 11oz green wand

    Discover our sleeve specially designed for the sublimation of 11 oz. conical mugs. This very easy to use sleeve can be used with a traditional rotary heat oven, or a 3D oven.

    With this new sublimation technique, you will be able to sublimate the entire surface of your mugs. A revolution in polyester sublimation!

    3D sublimation is a technique that allows you to personalize all types of objects; phone cases Iphone, mugs, glasses, plates, photo frames, textiles, ceramic tiles ... Don't wait any longer, adopt this new sublimation technique which is simple, fast and adapted to all types of supports.
    This technique has many advantages and will allow you to save precious time. Try it, you will be seduced!

    The + of the Product: is that you will be able to sublimate up to 12 mugs in one go. thanks to the 3D oven For this, it is necessary to have several mug sleeves.

    Tip Creadhesive: Use duct tape to fix your printed visual on your mug, before inserting it into the mould. Leave your mugs in an oven at 200° for 8 minutes.

    To know more about it
    EX. VAT : 15,79 € INCL. VAT : 18,95 €

  9. < -42

    in stock

    Digicoat adhesion pre-treatment

    Digicoat Adhesion Pretreatment

    Product In stock

    Ref:DIGICOAT-BOTTLE

    This product is strictly prohibited in delivery BY PLANE for DOM-TOM and countries abroad. Any material or goods considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints and chemicals).

    Digicoat Pretreatment of adhesion allows you to obtain a better adhesion of your dye-sublimation inks on your surfaces.

    We recommend using the low-pressure gun for a homogeneous and optimized application. 

    The Digi-Coat sublimation coating range is designed for the short and medium term, made to measure:

    Ce pré-traitement est un composé spécialement formulé qui a une forte affinité pour le verre, la céramique et les métaux polis, ce qui lui permet de former des liaisons physiques robustes sur vos surfaces.

    Il est également conçu pour réagir chimiquement avec la gamme spéciale de produits DigiCoat, offrant ainsi un lien puissant entre le revêtement et la surface.

    L'utilisation de DigiCoat pré-traitement sur le verre, la céramique, le métal et les surfaces polies avant le revêtement, améliore la durabilité globale, et la résistance chimique des autres revêtements Digicoat.

    Mode d'emploi cliquez ici :
    1. Assurez-vous que la surface à pré-traiter soit propre, et exempt de saleté ou de graisse

    2. Appliquez généreusement à l'aide du pistolet basse pression sur toute la surface à revêtir, en essayant d'assurer une couche uniforme.
    3. Laisser le composé se lier avec la surface pendant 30 secondes environ, avant de retirer l'excédent avec un tissu propre.

    To know more about it
    EX. VAT : 24,12 € INCL. VAT : 28,95 €

  10. < -47

    in stock

    Digicoat white opaque - dark surface

    Digicoat white opaque - dark surface

    Product In stock

    Ref:RED DIGICOAT

    This product is strictly prohibited in delivery BY PLANE for DOM-TOM and countries abroad. Any material or goods considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints and chemicals).

    Le Digicoat blanc opaque vous permet d'appliquer une sous-couche blanche sur vos supports foncés en vue de leur sublimation comme par exemple un morceau d'ardoise ou autre.

    En effet, pour être sublimé, votre support doit être blanc ou proche du blanc pour donner du relief à votre image.
    Afin de préparer votre surface à la sublimation, il faut d'abord appliquer le Digicoat opaque blanc puis le DigiCoat transparent. Le DigiCoat Opaque a été spécialement conçu pour s'utiliser avec le Digi Coat transparent.

    Il est facile à appliquer et peut s'utiliser sur de nombreux substrat. Enfin, il ne s'écaille pas et ne se décolore pas à la chaleur.
    Avec le Digicoat opaque vous pouvez désormais sublimer de nouveaux et nombreux supports foncés

    Mode d'emploi cliquez ici :
    1. Bien agiter pendant 1 minute.

    2. S'assurer que la surface à revêtir est propre, sec et exempt de graisse.

    3. Si votre surface a une finition brillante, il est conseillé d'utliser le DigiCoat prétraitement d'adhérence.

    4. Pour un meilleur résultat, appliquer le Digi Coat opaque à une distance d'environ 25cm de la surface.

    5. Laisser sécher à l'air pendant 5 minutes puis cuire votre support dans un four à 160 ° C pendant 15-20 minutes.

    Attention, les produits aérosols ne peuvent pas être acheminés par voie aérienne.

     

    To know more about it
    EX. VAT : 25,79 € INCL. VAT : 30,95 € incl. VAT : From 26,23 €

GridView VueListe

Articles 41 to 50 out of a total of 54

Page :
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6