Flex Accessories

Find all the equipment you need to make your flocking creations! Discover our various accessories to facilitate the installation of your flex on your textiles! We offer a wide range of weeding pliers, teflon sheets, cutters ... Flocking will no longer hold any secrets for you!

Find many explanations, tips and tricks via our video tutorials on our channel YouTube : Créadhésif ! You can also subscribe to our various Free online training (Webinar). Register now in the Support section of our website.



GridView VueListe

Articles 21 to 30 out of a total of 34

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  1. < -28

    in stock

    Teflon cover for heat press STAHLS

    STAHLS Teflon Cover for Bottom Tray heat press

    Product In stock

    Réf.:STH_HOUSSE_INF_013676

    The Teflon cover for the bottom plate is designed to protect your plate and all textile supports from all traces: dust, traces of glue, traces of ink, dirt ...
    You can use it for all types of transfers and techniques.
    Investing in a Teflon cover will allow you to preserve your heat press and prolong its life.

    Available in several sizes:
    - 15 x 25 cm
    - 40 x 50 cm
    - 38 x 38 cm

    A delay of one week may apply to this product.

    To know more about it
    EX. VAT : 41,62 € INCL. VAT : 49,95 €

  2. < 7

    in stock

    Coussins en téflon kit 4 tailles

    Teflon cushions - kit 4 sizes

    Out of stock

    Réf.:KIT_coussin_téflon

    Pour protéger tous vos vêtements et tissus lors du processus du transfert à chaud, et obtenir un rendu de qualité professionnelle, adoptez nos coussins en téflon ! Ces coussins peuvent être utilisés de nombreuses fois. 

    Ce kit de quatre coussins permet de réaliser des transferts en toute simplicité aussi bien sur des manches et des t-shirts enfants que sur des t-shirts taille XXL.
    Un kit indispensable pour obtenir un transfert de qualité sur tous types de textiles.


    Protection et qualité garantie !

    L’Astuce Créadhésif : Si vous réalisez du transfert sur des textiles qui ont des boutons, placez votre coussin à l’intérieur du vêtement de façon à obtenir une pression plus uniforme et ainsi un rendu de bien meilleure qualité. Ces coussins sont particulièrement recommandés pour le flockage textile.

    To know more about it
    EX. VAT : 51,62 € INCL. VAT : 61,95 €

  3. Innovation ! Stacking table - Make it easy for yourselfweeding STAHLS

    Out of stock

    Ref:STH_WEEDINGTABLE_163072

    Are you looking for a time-saving solution for your flex cutting jobs?

    We have the perfect solution for you: the weeding table for flex!

    Thanks to its large heated work surface, this table allows you to easily weave all types of flex and in particular glitter flex.

    Up to 80% of the time is saved onweeding. 

    Adjust the tilt (4 possible positions) and temperature of the table for the operator's comfort and according to the desired productivity gain.

    Product advantages :
    Theweeding table has :
    - A clamp that allows you to fix your flex sheet to facilitate theweeding, both flat and inclined.
    - A storage space to keep all your tools.

    An innovation you won't be able to live without!

    To know more about it
    EX. VAT : 650,00 € INCL. VAT : 780,00 €

  4. Product to remove Flex - Décol'Flex

    Product In stock

    SKU:THB_DECOLFLEX

    This product is strictly prohibited in delivery BY PLANE for DOM-TOM and countries abroad. Any material or goods considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints and chemicals).

    Start your textile markings with peace of mind!

    You made a mistake in the installation of your flex, or in theweeding ? The final result is not up to your expectations ? No need to panic! This Decol'flex will allow you to remove the flex and the flock of any textile in all simplicity.


    Instructions for use:

    1. Apply a generous amount of Decol'flex on the part of the fabric where the flex is located with a spatula
    2. Once you have applied the Decol'flex, remove it by hand or with a weeding tool.
    3. Remove the flex with protective gloves
    4. After removing the flex, it is best to press the area by covering it with a sheet of paper for 3 seconds at 160°C.

    To remove the imprint left on the textile, wash your textile, it will be as new. 

    Important: we recommend you to use this product on recent t-shirts, that you have just pressed, following a mistake for example. We cannot guarantee the result on shirts that were flocked several weeks or months ago. Depending on the material, the marks left on the T-shirt can be more or less important. Prefer natural cotton and recent materials for the use of this product.

    To know more about it
    EX. VAT : 20,75 € INCL. VAT : 24,90 €

  5. Precision knife

    Product In stock

    Article number: C-621S

    Cut your visuals with your fingertips!

    This knife has an ergonomic shape and a non-slip part that allows a good grip of the product.
    It is ideal for freehand cutting of shapes on vinyl for example, or for precise and meticulous cuts. Simply hold the tool between your thumb and forefinger, like a pen, and the blade will cut when your forefinger points down.

    It comes with 5 extra blades and a safety cover for the blade.

    To know more about it
    EX. VAT : 5,79 € INCL. VAT : 6,95 €

  6. Scalpel knife with 5 extra blades

    Product In stock

    Article number: C-601CS

    This scalpel knife has an ergonomic shape and a non-slip part that allows a good grip of the product. It is ideal for freehand cutting of shapes on vinyl for example, or for precise and meticulous cuts.

    It is sold with 5 extra blades and a safety cover for the blade.

    To know more about it
    EX. VAT : 6,62 € INCL. VAT : 7,95 €

  7. < -22

    in stock

    5 in 1 Knife Kit All Supports

    Product In stock

    Article number: 6001

    This knife will allow you to make a work of great precision on all types of supports.
    With this product, you will be able to cut paper, plastic, soft wood like balsa, fine metal, fabric ...

    This knife kit is delivered with 5 elements:
    - Needle point
    - Spoon point
    - Ball point
    - Pencil point
    - 3 incisive blades of great finesse

    In the same range, discover also our X-Acto knife.

    Tip CréadhésifWe recommend using the "ball point" to apply your transfers and stickers gently and precisely.

    To know more about it
    EX. VAT : 5,75 € INCL. VAT : 6,90 €

  8. Scalpel X-Acto + 10 blades

    Product In stock

    Ref:MRT_SCALPEL+LAME

    Pencil-shaped aluminium knife for precise cuts. Ideal for cutting "windows".

    To know more about it
    EX. VAT : 11,67 € INCL. VAT : 14,00 €
  9. 10 Ergonomic Film Cutting Blades

    Product In stock

    Reference:MRT_37020.50

    Refill blades for ergonomic film cutting.

    Sold by 10.


    Dimensions:
    Length: 43.00 mm
    Width: 22.00 mm
    Thickness: 0.20 mm

    To know more about it
    EX. VAT : 5,79 € INCL. VAT : 6,95 €

  10. < 5

    in stock

    10 X-Acto blades

    10 Spare blades for Scalpel X-Acto

    Product In stock

    Ref:MRT_72.50

    X-Acto knife blade refills.

    Sold by 10.


    Dimensions
    Length : 41.00 mm
    Width : 8.60 mm
    Thickness : 0.50 mm

    To know more about it
    EX. VAT : 5,75 € INCL. VAT : 6,90 €

GridView VueListe

Articles 21 to 30 out of a total of 34

Page :
  1. 1
  2. 2
  3. 3
  4. 4