Silhouette

Silhouette

The products of the Silhouette brand are very varied cutting machines, blades, mats, accessories, vinyls, pens, inks, ...

All SILHOUETTE cutting machines are equipped with an optical sensor that detects the printed marks at the same time as your creation made with the Silhouette Studio software in order to cut precisely the contours created. Simply print your design on your printer, then load the printed paper into the SILHOUETTE. The device reads the marks on the sheet and cuts the contours around your creation.

The advantage of this brand is the possibility to use the PIXSCAN mat with your electronic cutting machine and the Silhouette Studio software. This mat allows you to cut precisely around a printed pattern or when you need to place cutting lines at a specific location on your image.

The flagship model of the brand is the Silhouette CAMEO. It is the ultimate DIY machine. It connects to your PC or Mac with a simple USB cable. The Silhouette CAMEO uses a small blade to cut over 100 different materials including paper, vinyl and fabric up to 30 centimeters wide and 3 meters long. When you replace the blade with a pen, the CAMEO can also draw and make dotted lines. The machine has the ability to cut out images printed with the mark detection system.

GridView VueListe

Articles 11 to 20 out of a total of 33

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  1. < -28

    in stock

    Lame silhouette pour supports épais 2 mm

    Lame support épais 2mm pour Silhouette Cameo 5 / Cameo 4 / Portrait 3

    Product In stock

    SKU: SILH_BLADE-KRAFT-B

    La lame support épais 2 mm vous permettra de découper des matériaux épais, tels que de la cartonnette, du cuir, de la mousse artisanale...

    Il peut être recommandé d'uitliser cette lame avec une feuille de transport forte adhérence.

    Détails :
    - Matériau de la lame : acier inoxydable
    - Méthode de réglage : réglage manuel
    - Longueur de la lame : 0,1 mm à 3 mm

    A noter : pour la série CAMEO 4 / 5, cette lame s’utilise dans l’emplacement 1 du chariot.

    To know more about it
    EX. VAT : 19,99 € INCL. VAT : 23,99 €

  2. Transport sheet Low Adhesion Silhouette Portrait

    Product In stock

    SKU:SILH_CUT-MAT-8LT-3T

    Cette feuille de transport s'utilise avec le plotter de découpe Silhouette Portrait. Elle est utilisée pour effectuer la découpe de papiers créatifs et maintenir l'ensemble solidaire lors de cette découpe.

    Cette feuille a la particularité de bénéficier d'une faible adhérence, ce qui évite aux papiers fins et fragiles d'être déchirés lors de son utilisation.

    Le + du Produit est que son quadrillage vous permettra d'ajuster précisément le suppport à découper.

    L'Astuce Créadhésif: Pour insérer la feuille de transport dans le bon sens, utilisez la flèche noire située sur l'une des largeurs de la feuille.

    To know more about it
    EX. VAT : 12,49 € INCL. VAT : 14,99 €

  3. < -4

    in stock

    Tapis de détourage PixScan pour Silhouette Portrait

    Pix Scan Silhouette Portrait Clipping Mat

    Product In stock

    SKU:SILH_CUT-MAT-PIX8-3T

    Pix Scan Silhouette Portrait Clipping Mat

    This cutting mat can be used to trim an image already printed on, for example, a magazine page, a printed drawing, or any other pre-printed material. It also makes it possible to place dotted lines at a given point on the substrate. A clever and creative tool to adopt without further ado!

    To use it, nothing could be simpler: "Take a photo of the carpet with the visual, import it and cut it out! "

    1. Place your printed image on the Pix Scan mat.
    2. Take a picture of the mat and the image on the mat either with a scanner or with a camera
    - With a scanner: scan the entire mat after you have placed the pre-printed image on it.
    - With a camera: place the mat on a flat surface. Take a picture of the entire mat with the pre-printed image on it. The photo can be taken from the front or slightly at an angle. Transfer the image to your computer.
    3. In your Silhouette Studio software, click on the PixScan icon (top left) and follow the on-screen instructions to import your image.
    4. Perform your cutout as usual.

    Tip Créadhesif: make your life easier by using your smartphone's camera to import the visual of the carpet and the pre-printed image into your software. To do so, you just need to calibrate your smartphone using the link available in software version 3.1.

    To know more about it
    EX. VAT : 14,16 € INCL. VAT : 16,99 €

  4. Tapis de Détourage PixScan Silhouette Cameo

    Out of stock

    SKU:SILH_CUT-MAT-PIX12-3T

    This cutting mat will allow you to cut out an image already printed on for example a magazine page, a printed drawing, or any other pre-printed support. It also allows you to place dotted lines at a given point on the material. A clever and creative tool to adopt without further ado!

    To use it, nothing could be simpler. "Take a photo of the carpet with the visual, import it and cut it out!"
    1. Place your printed image on the Pix Scan mat.

    2. Take a photo of the mat and the visual on the mat either with a scanner or with a camera.
    - With a scanner: scan the entire belt after having installed the pre-printed image on it.
    - With a camera: place the mat on a flat surface. Take a picture of the entire mat with the pre-printed image on it. The photo can be taken from the front or slightly at an angle. Transfer the image to your computer.

    3. In your Silhouette Studio software, click on the PixScan icon (top left) and follow the on-screen instructions to import your image.


    4. Perform your cutout as usual.


    Tip Creadhesif: Simplify your life by using your smartphone's camera to import the carpet visual and the pre-printed image into your software. All you need to do is calibrate your smartphone using the link available in the Silhouette Cameo 3.1 version.

    To know more about it
    EX. VAT : 14,16 € INCL. VAT : 16,99 €

  5. < -50

    in stock

    Transport sheet for Silhouette Portrait

    Transport sheet for Silhouette Portrait

    Product In stock

    SKU:SILH_CUT-MAT-8

    La feuille de transport est utilisée pour effectuer la découpe du papier et maintenir l'ensemble solidaire.

    Cette feuille de transport est dotée d'une grille graduée qui représente parfaitement l'espace de travail que l'on retrouve sur le logiciel Silhouette Studio.

    Dimensions : 20 x 30 cm

    Cette feuille est compatible avec la Silhouette Portrait.

    To know more about it
    EX. VAT : 12,49 € INCL. VAT : 14,99 €

  6. < -6

    in stock

    Portrait & Cameo Silhouette Roller Loader

    Product In stock

    Ref:SILH_ROLL-FEEDER

    Grâce à ce chargeur de rouleau, vous obtiendrez une découpe fine et précise, en toute simplicité. Ce rouleau vous permettra de positionner avec précision votre rouleau de vinyle ou de flex, qui sera ainsi guidé parfaitement lors de la réalisation de la découpe.

    Ce chargeur de rouleau est compatible avec la Silhouette Portrait et la Silhouette Cameo.

    Tous les rouleaux compris entre 22 et 32 cm peuvent être utilisés avec ce chargeur.

    Le + du Produit est que ce chargeur de rouleau est livré avec un cutter à main pour séparer la matière une fois la découpe terminée.

    L'Astuce Créadhésif: Utilisez les emplacements prévus sur le chargeur de rouleau pour accueillir les patins de la Silhouette, vous positionnerez ainsi correctement votre chargeur sur la silhouette cameo ou portrait.

    To know more about it
    EX. VAT : 36,66 € INCL. VAT : 43,99 €

  7. < -21

    in stock

    Power supply - Silhouette Charger Cameo & Portrait

    Product In stock

    Ref:SILH_feeding-silhouette-camera-portrait

    Vous avez perdu le chargeur de votre Silhouette Cameo ou de votre Silhouette Portrait ? Le vôtre ne fonctionne plus correctement ? Pas de panique, nous avons un chargeur de remplacement pour vous ! 

    To know more about it
    EX. VAT : 24,00 € INCL. VAT : 28,80 €

  8. < -22

    in stock

    Squeegee Silhouette

    Product In stock

    SKU:SILH_TOOL-02-3T

    Petit accessoire indispensable dans la pose de vinyle, la raclette vous permettra d'appliquer votre film de transfert sur le vinyle avec précision pour un résultat professionnel. Vous pourrez facilement lisser votre matière en éliminant les bulles d'air qui auraient pu se former.

    Cette raclette s'utilise également pour nettoyer votre feuille de transport.

    Craquez pour cet outil malin, pratique à petit prix !

    L'Astuce Créadhesif: Vous pouvez également utiliser cette raclette pour lisser tous types de supports papiers dans le cadre d'activités telles que le scrapbooking ou pour nettoyer votre surface de travail.

    To know more about it
    EX. VAT : 3,66 € INCL. VAT : 4,39 €

  9. < -2

    in stock

    Silhouette Spatula

    Silhouette Spatula

    Product In stock

    SKU:SILH_TOOL-03-3T

    Cet outil est l'accessoire idéal si vous possédez une Silhouette Cameo ou Silhouette Portrait.

    La spatule Silhouette vous permettra de décoller en finesse tous les supports maintenus sur la feuille de transport, sans déchirer le support découpé.

    Son bout fin et pointu permet de réaliser un travail précis, sur tous types de supports découpés.

    L'Astuce Créadhesif: Utilisez cette spatule pour nettoyer votre feuille de transport de toutes les aspérités. Vous pouvez notamment l'utiliser pour "gratter" les petits morceaux de papiers trop collés à votre feuille de transport.

    To know more about it
    EX. VAT : 6,66 € INCL. VAT : 7,99 €

  10. < -42

    in stock

    Reusable Stencil Silhouette 30 x 60 cm

    Product In stock

    Ref:SILH_MEDIA-STENCIL

    Do you want to make stencils that last?

    This product is made for you. This stencil, of high quality, is reusable several times, and will allow you to realize a mutitude of creations.

    This stencil is perfectly suited for cutting plotters. Cameo Silhouette or Silhouette Portrait.

    In the same section, you will also find our Adhesive vinyls.

    To know more about it
    EX. VAT : 9,16 € INCL. VAT : 10,99 €

GridView VueListe

Articles 11 to 20 out of a total of 33

Page :
  1. 1
  2. 2
  3. 3
  4. 4