Silkscreen printing

In this section you will find a wide variety of screen printing kits as well as all the equipment and accessories needed to start screen printing textiles.

In order to be always close to your needs, we also propose cleaning kits adapted to water based and plastisol inks.

Complete and practical, our kits will adapt to all your needs. Whether you are a beginner or experienced screen printer, for your own pleasure or to start an activity, you will inevitably find your happiness on our site!

What are the advantages of screen printing?
- A simple and economical printing technique that requires few tools
- A wide range of possibilities (gradient patterns, multi-colour)
- An irreproachable behaviour on the long term
- A professional quality finish
- Intense colours and good opacity
- A great precision of the line
- A great resistance of the colors to the light

And to finally find all the answers to your questions, do not hesitate to consult our section "textile serigraphy" as well as all the Creadhesif tips which benefit most of our products.

GridView VueListe

Articles 21 to 30 out of a total of 41

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Screen printing pallet size XL

    Out of stock

    Ref:paletteXL

    This palette will allow you to screen print on XL size T-shirts or textiles such as tablecloths, sheets, etc...

    Made in MDF, and benefiting from a white melamine coating, you are assured to obtain a better heat resistance.

    Delivered without fixing support. DImension: 50.5 cm x 66cm

    This pallet is compatible with the following carousels:
    - Screen printing carousel 1 color
    - Screen printing carousel 4 colors / 1 jeannette

    Tip Creadhesif: Remember to fold the sleeves of your textile under the pallet. To fix your textile on the pallet, we also recommend that you apply aerosol glue or the Nearm Probond glue sold on our site. You will then be able to make your print with complete peace of mind.

    To know more about it
    EX. VAT : 49,92 € INCL. VAT : 59,90 €

  2. < 2

    in stock

    Silkscreen pallet adult size 40 x 40cm

    Product In stock

    Ref.: 40cm pallet

    This palette allows you to print on children's and teenagers' T-shirts.

    It is made of MDF with a white melamine coating for heat resistance.

    Delivered without fixing support. Dimension: 40 cm x 40 cm

    Compatible with the following carousels:
    - 1 colour screen printing carousel
    - 4 colour / 1 banner screen printing carousel

    Tip Creadhesive: Remember to fold the sleeves of your textile under the pallet. To fix your textile on the pallet, we also recommend that you apply aerosol glue or Nearm Probond glue sold on our site. You will then be able to make your print with complete peace of mind.

    To know more about it
    EX. VAT : 40,83 € INCL. VAT : 49,00 €

  3. < -1

    in stock

    AMEX white water etching ink

    AMEX Discharge White Rodent Ink

    Product In stock

    SKU: TEXPRINT_DISCHARGE_WHITE_AM100629

    A gnawing ink is a water-based ink. It can be used as an undercoat for printing with water-based or plastisol inks. This new and unique formula allows the base to look and behave more like a plastisol ink rather than a water-based ink.

    After opening the jar, you will immediately notice that this base is creamier, holds better and looks shinier than any other base you have used before.

    Our rodent ink can be used with most 100% cotton T-shirts (does not set on polyester).

    WARNING: white etching ink, as well as neutral etching ink, must be activated with a activating agent.

    This agent should be mixed at the base in a proportion of 4 to 6% (we recommend 6%). Make sure that you only activate the amount of ink you need for your print job, because once mixed, the ink has a service life of 6 to 8 hours.


    How to apply a base coat: An undercoat can be applied by printing on gummy ink that will alter the colour of your substrate. Dry quickly (flasher) and then do your print wet on wet. For a silky, shiny result try our white rodent bases which will create a white base.

    Tip Créadhésif : use white gummy ink to obtain a silky and glossy finish.

    To know more about it
    EX. VAT : 20,00 € INCL. VAT : 24,00 €

  4. Detergent Lumi Inkowash 118 ml

    Product In stock

    Article number: LUMI-WASH-118ML

    This product is used with Inkodye emulsion from the Lumi range. The use of these two products will allow you to make fashion creations in all simplicity, and this with very few materials! It is the perfect alternative to screen printing to get a professional look in a quick and easy way.

    This detergent is used at the time of washing (washing machine).

    Discover also our Easy'kit which includes all the materials you need to get started.

    Are you wondering how to make a T-shirt using Lumi products? Nothing could be easier:
    1) Shake theInkodye (emulsion) and apply it to the T-shirt using the applicator roller.
    2) Remove the excess emulsion by gently dabbing your T-shirt with a paper towel.
    3) Print your design on a typon and attach it to the T-shirt.
    4) Then expose your t-shirt to natural light for 10 to 20 minutes.
    5) Peel your typon (transparent film) from the T-shirt (transparent film)
    6) Wash your T-shirt using Inkowash. To do this, pour 3 capfuls of Inkowash into your machine (for a machine half full).

    Tip Créadhesif: To optimise the effectiveness of the Inkowash, wash your fabric twice in the washing machine: once with a hot cycle, and again with a cold cycle.

    The + Product is an application for Iphone which has been developed especially for this new range of products. Thanks to this application, you will be able to modify your black and white photos to create your negatives. To discover the application, Click here.

    To know more about it
    EX. VAT : 8,25 € INCL. VAT : 9,90 €

  5. Rodent base for plastisol ink: Ryocharge

    Product In stock

    Ref.:ryocharge

    Imagine the look and feel of a gnawing ink with plastisol. Just add 50% RyoCharge additive with 50% plastisol ink, mix with the activator and you can now print with a hybrid plastisol/rodent ink. RyoCharge additive works very well with all Plastisol inks.

    Note, RyoCharge base must be activated with activator for rodent ink

    Available in 1 gallon or 5 gallon jars

    Application:

    1) Mix RyoCharge 50/50 with your Plastisol ink. Stir until a homogenous consistency is obtained for mixing. Do not use high speed mixers that can heat the ink and make it harden in the container.
    2) Add 3 to 6% by weight of activating agent to the mixture, and mix until the agent is completely dissolved in the ink.

    Once mixed, the ink can be kept for up to 24 hours.

    Printing:

    Use a squeegee with high hardness. Print wet-on-wet without intermediate drying. The true colour will only appear once the baking process has been completed. On long print runs, when dry, spray the screen with water to improve ink viscosity.

    Drying:

    Bake for a minimum of 90 seconds at 160°C to activate the gumming agent and obtain good wash resistance. Evaporation of the water too quickly stops the gnawing reaction and can lead to dull colours.

    To know more about it
    EX. VAT : 160,00 € INCL. VAT : 192,00 €

  6. Detergent Lumi Inkowash 237 ml

    Product In stock

    Article number: LUMI-WASH-237ML

    This product is used with Inkodye emulsion from the Lumi range. The use of these two products will allow you to make fashion creations in all simplicity, using very few materials! It is the perfect alternative to screen printing to achieve a professional look in a quick and easy way.

    This detergent is used at the time of washing (washing machine). Discover also our Easy'kit which includes all the necessary material to start with peace of mind.

    Are you wondering how to make a T-shirt using Lumi products? Nothing could be easier:
    1) Shake theInkodye (emulsion) and apply it to the T-shirt using the applicator roller.
    2) Remove the excess emulsion by gently dabbing your T-shirt with a paper towel.
    3) Print your design on a templateand attach it to the T-shirt.
    4) Then expose your artwork to natural light for 10 to 20 minutes.
    5) Peel off your artwork(transparent film) from the T-shirt (transparent film)
    6) Wash your T-shirt using the Inkowash. To do this, pour 3 caps of Inkowash into your machine (for a machine half full).

    Tip Créadhesif: To optimize the effectiveness of the Inkowash, wash your textile twice in the washing machine: once with a hot cycle, and a second time with a cold cycle.

    The + of the Product is an application for Iphones which was developed especially for this new range of products. Thanks to this application, you will be able to modify your black and white photos to create your negatives. To discover the application, click here .

    To know more about it
    EX. VAT : 16,58 € INCL. VAT : 19,90 €

  7. Shadow & Objects Printing Kit

    Product In stock

    Article number: Shadow

    Are you looking to make a shadow of an object in print? This kit is for you!

    With this kit, discover how to personalise objects and textiles using only the power of the sun. This is the ideal kit to start screen printing with a minimum of equipment and a small budget. You will be able to create a true-to-life shadow of a leaf or a flower!

    Ideal for anyone looking for a simple, effective and quick solution, this kit allows you to personalise textiles in a durable way.

    Tip Créadhesif: Use the acrylic support to hold the object (a leaf or a flower for example) during exposure to the sun.

     

     

    To know more about it
    EX. VAT : 26,58 € INCL. VAT : 31,90 €

  8. < 3

    in stock

    Ready to press 1 colour Phosphorescent

    250 Prêt-à-presser Transfert sérigraphique 1 couleur Phosphorescent ou Rétroréfléchissant

    Product In stock

    Réf.:TS_250 planche Phospho

    With this technique, no more constraints of colours and materials to realize your creations!
    Screen printing transfer allows you to personalise all types of textiles and products (cotton, polyester, nylon, surveillance, luggage, bathing suits, etc.) in any colour.

    Technical Information:

    - Printable area: 280 x 400 mm
    - 1 colour

    The minimum purchase for this product is 20 boards.

    Tip for your single color files: prepare your file in black without background whatever the printing color

    To know more about it
    EX. VAT : 370,50 € INCL. VAT : 444,60 €

  9. 25 test sheets for screen printing

    Product In stock

    Ref.:testsquare

    The test squares for screen printing are used to carry out a print test before starting production.

    They are handy to find pinholes and to set up a precise setting between several colours before printing starts.

    Size: 30.5 x 40.5 cm

    To know more about it
    EX. VAT : 10,42 € INCL. VAT : 12,50 €

  10. Plastisol AMEX ink - 6 and 7 Kg jar

    Product In stock

    Ref:PLAST - 6KG

    Plastisol quick-flash AMEX ink in 6 and 7 Kg pots

    All our AMEX inks are phthalate-free. They are used for direct printing on cotton, synthetic or mixed fabrics.

    PLAST PF ink is the flagship of the AMEX brand. It is a plastisol system, versatile and easy to use, composed of a considerable variety of neutral, coloured and white bases which can be mixed according to the desired effects.

    PLAST PF ink does not air dry and therefore allows screen printing with frames with a high number of threads (>120 threads/cm2).

    Drying:
    Direct application on fabrics: in an oven for 2 minutes at 150°C
    Application on transfer paper: in an oven for 1 minute at 120-140°C

    You can use it wet-on-wet or with an intermediate flash (3-5 seconds).

    You will obtain with this ink a high covering power, a soft touch, and an excellent colour result.

    To know more about it
    EX. VAT : 40,00 € INCL. VAT : 48,00 €

GridView VueListe

Articles 21 to 30 out of a total of 41

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5