Water-based ink

GridView VueListe

5 article(s)

  1. Texprint Water Ink - 1 kg - Drying at room temperature

    Product In stock

    Ref:Texprint Mono

    Texprint Waterbased Ink - Drying at room temperature

    Texprint Mono ink is an opaque water-based ink that dries at room temperature. It is available in various colours and can be used on dark textiles. Ready to use!

    Characteristics:
    - Excellent opacity
    - Single-component ink
    - Drying at room temperature

    Printing:
    In order to obtain excellent opacity and vivid colours, we advise you to carefully adjust your off-contact and squeegee pressure when printing.
    We also advise you to use screens with a mesh size between 34 and 55 threads/cm2.
    It is not recommended to use this ink on a "wet-on-wet" application.

    Drying:
    Texprint Mono ink dries in 72 hours at 40°C. To speed up drying, you can also dry at 100°C.

    Additive :
    - Thickening agent ( Texprint Addensante M ) : add 1 to 5%
    - Universal catalyst ( Texprint universal catalyst ) : increases the resistance to washing : add 1 to 5%
    - Retarding agent ( Texprint Retarding Gel ) : reduces drying on the screen : add 5%
    - Retarding agent ( Texprint Additive S ) : reduces drying on the screen without reducing viscosity : add 5%
    - Texprint No Tack : to increase opacity and obtain a soft touch

    Cleaning:
    Cleaning with water

    Available in 1kg jar

    To know more about it
    EX. VAT : 12,00 € INCL. VAT : 14,40 €

  2. 2.5 Kg of screen printing transfer powder - 80 to 200 microns

    Product In stock

    Ref:powder 80-200

    2.5Kg transfer powder - 80 to 200microns

    This transfer powder is to be applied on your screen printing transfer. After firing your transfer at 100°C for 1min30-2min, the powder will melt into the ink. Finally, during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.

    1/ Make these frames with a mirror image
    2/ print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
    3/ Once all the colours are superimposed, sprinkle the powder and remove the excess powder.
    4/ Bake your transfer at 100°C for 1min30-2minutes - Your transfer is ready!

    The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

    This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.

    The powder can be stored in a dry place for 2 years.

    This powder gives your transfer an excellent resistance to washing (up to 90°C).

    To know more about it
    EX. VAT : 71,50 € INCL. VAT : 85,80 €

  3. 2.5 Kg of fine screen printing transfer powder - 0 to 80 microns

    Product In stock

    Ref:Powder 0-80 microns

    2,5Kg of transfer powder - 0 to 80 microns

    This transfer powder is used for the realization of your screen printing transfers. The fine powder is used directly mixed with your ink in a proportion of 10 to 15% depending on the viscosity of your ink.

    After firing your transfer at 100°C for 1min30 - 2min, the powder will melt in the ink. Finally during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.

    1/ Make these frames with a mirror image
    2/ Print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
    3/ Once all the colours are superimposed, apply the last layer of ink containing the powder.
    4/ Bake your transfer at 100°C for 1min30 - 2minutes - Your transfer is ready!

    This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.

    The powder can be stored in a dry place for up to 2 years. 

    This powder gives your transfer an excellent resistance to washing (up to 90°C).

    Tip Créadhésif : press your transfer at 160°C-180°C for 10 to 15 seconds. Peeling is done cold.

     

    To know more about it
    EX. VAT : 71,50 € INCL. VAT : 85,80 €

  4. Adhesive glue for extensible substrates: Texicoll Perfect - Water-based ink

    Product In stock

    Ref:AM100708

    This product is strictly prohibited in delivery BY PLANE for DOM-TOM and countries abroad. Any material or goods considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints and chemicals).

    Découvrez la colle Texicoll Perfect de chez Amex adaptée aux encres à eau pour tous les transferts sérigraphiques sur supports extensibles. Simple d'utilisation,de haute qualité, elle est transparente et bénéficie d'une haute élasticité. Ses propriétés vous permettront de réaliser des créations sur tout type de supports extensibles, qui contiennent entre autre de l'élastane. 

    Application:
    Cette colle s'utilise avec des encres à base d'eau Texprint pour la réalisation de transferts sérigraphiques ou pour la pose de mylar ou flock en sérigraphie. Elle est adaptée aux textiles 100% coton ou cotons avec fibres synthétiques. Elle peut s'appliquer sur un papier siliconé ou polyester.

    L'Astuce Créadhésif : afin d’obtenir un résultat optimum, il est recommandé d’ajuster au mieux le contact de l'écran avec le support et la pression de la raclette. Avant de valider une production auprès de l'un de vos clients, nous vous conseillons de réaliser des tests afin de valider le résultat obtenu.

    Vendue en pot de 1 ou 5 kg 

    To know more about it
    EX. VAT : 15,00 € INCL. VAT : 18,00 €

  5. Adhesive Glue for Low Temperature Transfer: Texicoll BT - Water-based ink

    Product In stock

    Ref:AM100702

    This product is strictly prohibited in delivery BY PLANE for DOM-TOM and countries abroad. Any material or goods considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints and chemicals).

    Retrouvez la colle adhesive à base d'eau TEXICOLL BT de Amex pour le transfert à Basse Température sur textile.

    Elle s'utilise sur un papier siliconé ou polyester, ou avec du mylar et feuille de finition flock. Elle est adaptée aux textiles 100% coton ou aux cotons avec fibres synthétiques. 

    Vendu au format 1kg ou 5kg.

    Caractéristiques :
    - Haute élasticité
    - Hautes propriétés adhésives
    - Excellente résistance au lavage et au sèche-linge
    - Maille imprimable jusqu’à 43 Fils/ CM
    - Transfert à 80°C (pelage à froid)
    - Sans PVC et sans phtalates
    - Sans formaldéhyde

    L'Astuce Créadhésif : afin d’obtenir un résultat optimum, il est recommandé d’ajuster au mieux le contact de l'écran avec le support et la pression de la raclette. Avant de valider une production auprès de l'un de vos clients, nous vous conseillons de réaliser des tests afin de valider le résultat obtenu.

    To know more about it
    EX. VAT : 15,00 € INCL. VAT : 18,00 €

GridView VueListe

5 article(s)