Consumables for Screen Transfer

Discover all the equipment you need to make screen printing creations and in particular our OKI 9541WT printer! This technical jewel is the ideal ally for this technique. You will also find additional equipment, namely carousels adapted to screen printing available in several formats. We also offer a wide range of consumables (toner, paper, film, glue, etc.). No need to look any further, we have all the material you need to start your creations.

Find many explanations, tips and tricks via our video tutorials on our channel YouTube : Créadhésif ! You can also subscribe to our various Free online training (Webinar). Register now in the Support section of our website.

GridView VueListe

2 article(s)

  1. 2.5 Kg of screen printing transfer powder - 80 to 200 microns

    Product In stock

    Ref:powder 80-200

    2.5Kg transfer powder - 80 to 200microns

    This transfer powder is to be applied on your screen printing transfer. After firing your transfer at 100°C for 1min30-2min, the powder will melt into the ink. Finally, during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.

    1/ Make these frames with a mirror image
    2/ print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
    3/ Once all the colours are superimposed, sprinkle the powder and remove the excess powder.
    4/ Bake your transfer at 100°C for 1min30-2minutes - Your transfer is ready!

    The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

    This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.

    The powder can be stored in a dry place for 2 years.

    This powder gives your transfer an excellent resistance to washing (up to 90°C).

    To know more about it
    EX. VAT : 71,50 € INCL. VAT : 85,80 €

  2. 2.5 Kg of fine screen printing transfer powder - 0 to 80 microns

    Product In stock

    Ref:Powder 0-80 microns

    2,5Kg of transfer powder - 0 to 80 microns

    This transfer powder is used for the realization of your screen printing transfers. The fine powder is used directly mixed with your ink in a proportion of 10 to 15% depending on the viscosity of your ink.

    After firing your transfer at 100°C for 1min30 - 2min, the powder will melt in the ink. Finally during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.

    1/ Make these frames with a mirror image
    2/ Print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
    3/ Once all the colours are superimposed, apply the last layer of ink containing the powder.
    4/ Bake your transfer at 100°C for 1min30 - 2minutes - Your transfer is ready!

    This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.

    The powder can be stored in a dry place for up to 2 years. 

    This powder gives your transfer an excellent resistance to washing (up to 90°C).

    Tip Créadhésif : press your transfer at 160°C-180°C for 10 to 15 seconds. Peeling is done cold.

     

    To know more about it
    EX. VAT : 71,50 € INCL. VAT : 85,80 €

GridView VueListe

2 article(s)