heat press

Créadhésif vous propose un large choix de presses à chaud vous permettant de démarrer une activité à moindre frais ou bien de consolider votre activité avec une production soutenue.
Les presses à textiles sont conçues pour différentes applications, principalement pour le flockage et la sublimation.
Largement utilisées pour des transferts sur supports plats comme des tee-shirts ou des serviettes, elle peuvent aussi servir au pressage sur puzzles, tapis de souris, carreaux de carrelage, magnets et bien d'autres articles sublimables.

 



Retrouvez de nombreuses explications, conseils et astuces via nos tutoriels vidéos sur notre chaine YouTube : Créadhésif ! Vous pouvez également vous inscrire à l'un de nos Webinars gratuits (catégorie Support sur notre site).

 

GridView VueListe

Articles 21 to 30 out of a total of 38

Page :
  1. 1
  2. 2
  3. 3
  4. 4
  1. Presse à chaud Stahls Hotronix Dual Air Fusion IQ

    Product In stock

    Réf.:STH_DUALAIR_162908

    Cut your production time in half with the STAHLS' Hotronix® AirFusion IQ® press!

    This heat press automatic is composed of two worktops with two lower trays of 40 x 50 cm to allow you to work faster and more efficiently.

    With 8 positioning lasers (4 on each work surface) that will allow you to align all your graphics more precisely, the AirFusion IQ press is ideal for large productions. The lasers are connected to the workstations and can be individually adjusted via the central screen.

    The central screen is touch-sensitive and allows you to program the time, temperature and pressure very easily. 4 presets are already integrated and you can program and memorize your own settings in unlimited to save precious time.

    The 2 trays can be replaced with the quick change system and the 2 workstations can be ordered together or separately.

    Operates in fully automatic, semi-automatic and manual modes.

    Tip Créadhésif Generate production statistics directly via the touch screen to check your productivity.

    Warning: This press requires the use of a compressor.

    A delay of one week may apply to this product.

    To know more about it
    EX. VAT : 7 390,00 € INCL. VAT : 8 868,00 €

  2. < 6

    in stock

    Interchangeable mask plate 14cm x 14cm for Secabo heat presses

    Interchangeable mask plate 14cm x 14cm for Secabo heat presses

    Product In stock

    Réf.:SCB_109.501.05_arrondi 14

    Interchangeable face mask tray 14cm x 14cm for heat press Secabo.

    This tray is suitable for a wide variety of face mask types.
    Due to its size and different corner radii (20 and 40 mm), the tray can be adapted to other transfer objects.

    This model is suitable for Secabo TC5 / TC7 Smart, TPD7; TPD7 Premium and TS7 / TS7 Smart presses.
    The optional mounting kit is mandatory for use without the quick-loading system for TC5 / TC7 Smart presses and only with the quick-loading system for TPD7, TPD7 Premium and TS7
    .

    To know more about it
    EX. VAT : 89,00 € INCL. VAT : 106,80 €

  3. < -2

    in stock

    15 cm circular interchangeable plate for Secabo heat presses

    Interchangeable circular interchangeable platen 15cm diameter for Secabo heat presses

    Product In stock

    Réf.:SCB_109.501.04_diam. 15

    Interchangeable circular interchangeable tray 15 cm diameter for heat press Secabo.

    This tray is suitable for a wide variety of product types, complex objects, as well as face masks.

    This model is suitable for Secabo TC5 / TC7 Smart, TPD7; TPD7 Premium and TS7 / TS7 Smart presses.
    The optional mounting kit is mandatory for use without the quick-loading system for TC5 / TC7 Smart presses and only with the quick-loading system for TPD7, TPD7 Premium and TS7
    .

    To know more about it
    EX. VAT : 89,00 € INCL. VAT : 106,80 €

  4. new ! Secabo Thermobase Bottom Heating Tray TB7 40cm x 50cm

    Product In stock

    Article number: SCB_109.545.21

    Do you want to make white toner laser transfer? Then this tray is the right accessory for you!

    The Thermobase TB7 platen is a heating platen compatible with all Secabo 40 x 50 cm presses such as the TC7 SMART, TS7 SMART, TPD7 and TPD7 PREMIUM, as well as many older models.
    With the new TB7 the heat in a transfer press comes not only from above, but also from below. This results in lower transfer temperatures, shorter transfer times and reduced marks on textiles.In addition, the temperature can be reduced by the second heating plate, which in turn is gentle on the fabric. The heated bottom plate is particularly recommended for sensitive textiles.
    Transfers made with a white toner printer and sublimation transfers are also much more reliable, reproducible and of better quality with a fixed heat base plate! The temperature of the TB7 is regulated with its own Secabo controller.
    The Thermobase is lightly padded, but can also be equipped with a hard or extra soft mat, depending on the application.

    Its 3 + Products :

    Recommended for toner transfer 

    For toner transfers, it is usually necessary to press two sheets (paper/film) and then remove them at the same temperature. This process is much easier and more reliable with a heated lower platen, which gives better transfer results compared to standard lower platens. The new heat press "THE BEAST" does it perfectly with this new TB7 tray. 

    Easy to assemble

    The heated lower platen TB7 fits all new Secabo heat presses and can also be mounted on quick-change trolleys and sliding carriages, so that smaller exchangeable platens can be used easily.

    Particularly suitable for sensitive textiles

    The lower heating plate TB7 tends to press at a lower temperature because the energy does not have to "pass through" the textile completely through the upper heating plate. Parallel heating from below therefore protects the textiles.


    To know more about it
    EX. VAT : 499,00 € INCL. VAT : 598,80 €

  5. < -44

    in stock

    Secabo TC7 Lite 40 x 50 cm

    Presse à chaud électromagnétique modulaire Secabo TC7 Lite 40 x 50 cm

    Product In stock

    Réf.:SCB_109.007.23 _TC7 Lite

    With the development of this new wallet press, Secabo is introducing a modular system that offers you a multitude of possibilities. You will benefit from more flexibility thanks to easily interchangeable components. The new LITE models can be equipped with lower platens or heating platens if required.

    The heat press TC7 LITE is a modular electromagnetic press with a 40cm x 50cm printing format. You will be able to perform another task at the same time as your pressing in all serenity, thanks to its automatic opening system. The pressing process can be interrupted at any time by pressing a push button (e.g. for pre-pressing textiles). The temperature and pressing time can be easily selected using thedigital display. The pressure adjustment wheel makes it easy and fast to adjust to the printed material. The control unit, heating plate, bottom plate and frame can be removed and replaced in a few simple steps.

    The TC7 LITE heat press can be used on T-shirts, mouse pads, puzzles, ceramic tiles and any other flat surface using Flex, Flock, transfer paper, sublimation and screen printing. The new press offers comfort of use thanks to its electromagnetic mechanism and a gain in productivity thanks to the automatic raising at the end of the time. You will find all the comfort of a pneumatic press without the constraints of using a compressor.

  6. The elements included with the Secabo TC7 LITE press
  7. - Mechanical base
    - Hot plate and base plate
    - LITE control box
    - Power cord C13
    - Tools
    - Instructions for use

  • Compatible with accessories
  • This heat press Secabo can be equipped with optional interchangeable platens of different sizes, but also with a membrane platen, a quick change system and a sliding carriage for use as a double platen press.
    The membrane platen will allow you to easily make textiles with buttons, zippers, seams etc. The TB7 heated bottom plate will allow you to have less marks on the plate, it is recommended for sensitive textiles and white toner transfers.

  • The Secabo TC7 Lite press has many advantages!
  • - Intelligent display functions with digital controllers
    - Simple control concept
    - Robust, state-of-the-art press
    - Easy-to-adjust and variable pressure
    - Reliable control system reduces temperature fluctuations
    - Wide opening angle of 40°C for safe and comfortable working
    - Even temperature distribution

  • Our valuable advice
  • To protect your upper heating plate and better distribute the heat, you can find Teflon sheets or covers in 40x50cm format

    In order to raise the part of your textile that you wish to press, think of the Teflon cushions (in kit or in unit) allowing you to heat only the desired part.
    Strongly advised for textiles with buttons, zips, or delicate textiles


    With this press, your creations will take on a whole new dimension! 

    Order your plotter on Créadhésif, and get 5% off your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.

     

    To know more about it

    EX. VAT : 839,00 € INCL. VAT : 1 006,80 €

  • < -22

    in stock

    heat press Secabo TC5 Lite modular electromagnetic system 38 x 38 cm

    heat press Secabo TC5 Lite modular electromagnetic system 38 x 38 cm

    Product In stock

    Reference:SCB_109.005.22_TC5 Lite

    The heat press TC5 LITE is a modular electromagnetic press with a wallet opening and a printing format of 38cm x 38cm.
    You will be able to perform another task at the same time as pressing, thanks to its automatic opening system. The pressing process can be interrupted at any time by pressing a push button (e.g. for pre-pressing textiles). The temperature and pressing time can be easily selected using thedigital display. The pressure adjustment wheel makes it easy and fast to adjust to the printed material, the control unit, heating plate, bottom plate and frame can be removed and replaced in a few simple steps.

    The TC5 LITE heat press can be used on T-shirts, mouse pads, puzzles, ceramic tiles and any other flat surface using Flex, Flock, transfer paper, sublimation and screen printing. The TC5 Lite is comfortable to use thanks to its electromagnetic mechanism and a gain in productivity thanks to the automatic lift at the end of the timer. You will find all the comfort of a pneumatic press without the constraints of using a compressor.

  • The elements included with the Secabo TC5 Lite press
  • - Mechanical base
    - Hot plate and base plate
    - LITE control box
    - Power cord C13
    - Tools
    - Instructions for use

  • The Secabo TC5 Lite press has many advantages!
  • - Intelligent display functions with digital controllers
    - Simple control concept
    - Robust, state-of-the-art press
    - Easy to adjust and variable pressure
    - Reliable control system reduces temperature fluctuations
    - Wide opening angle of 40°C for safe and comfortable working
    - Even temperature distribution

  • Upgrade your Secabo TC5 Lite press
  • This heat press Secabo can be equipped with optional interchangeable platens of different sizes, but also with a membrane platen, a quick change system and a sliding carriage for use as a double platen press.
    The membrane platen will allow you to easily make textiles with buttons, zippers, seams etc.
    The TB7 heated bottom plate will allow you to have less marks on the plate, it is recommended for sensitive textiles and white toner transfers.

  • Our valuable advice
  • To protect your upper heating plate and better distribute the heat, you can find Teflon sheets or covers in 40x50cm format

    In order to raise the part of your textile that you wish to press, think of the Teflon cushions (in kit or in unit) allowing you to heat only the desired part.
    Strongly advised for textiles with buttons, zips, or delicate textiles


    With this press, your creations will take on a whole new dimension! 

    Order your plotter on Créadhésif, and get 5% off your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.

     

    To know more about it

    EX. VAT : 719,00 € INCL. VAT : 862,80 €

  • < 2

    in stock

    TS7 Smart The Beast

    new ! heat press Secabo TS7 THE BEAST

    Product In stock

    Réf.:SCB_109.011.15_THE BEAST

    You are looking for a press for your DTF or LASER transfers, the TS7 THE BEAST is made for you !!!

    More efficient and robust, the new TS7 Smart Secabo press with automatic side opening is the very first fully designed and assembled press in Germany. This press is dedicated to professionals for all kinds of high-end marking. It is ideal to facilitate the setting up of your transfers thanks to its automatic side opening which offers a particularly spacious working space.

    + Product : The Ts7 The Beast press is equipped with a TB7 lower heating plate, to make your most difficult textile markings and transfers in laser printing with White Toner.
    The TB7 heated bottom plate is ideal for making your most difficult white toner laser transfers. The temperature of the plate is independently adjustable thanks to the detachable case.

    The TS7 THE BEAST adapts to your working environment by selecting the right or left opening direction.
    You can press products up to 70 mm thick with a maximum pressure of 250 g/cm².

    Like all products in the SMART range, the TS7 THE BEAST has a Bluetooth interface, a digital display with easy adjustment of the temperature up to 225°C and the pressing time (999s. max.) for each tray.

    You can access a database of different transfer manufacturers with the Secabo Smart Transfer App, and recommendations based on the trays used.

    The TS7 THE BEAST press is scalable according to your needs. Indeed it is compatible with the standard platen, the fast loading cart, the interchangeable platens, the sliding cart.

    * The optional flocking accessory kit contains: 1 flaker, 1 ergonomic film cutter, 1 X-Acto scalpel knife

     Order your press on Créadhésif, then get 5% off your consumables for 1 year. To benefit from this offer, please contact the sales department after your purchase at [email protected], specifying your name and order number.

    Tip: You can also use the TB7 heating plate for theweeding of your flexes - Set to a hundred degrees - Place your flex on the plate, the heat allows you to weed more easily the flex around your cuts


    To know more about it
    EX. VAT : 2 349,00 € INCL. VAT : 2 818,80 €

  • < -14

    in stock

    Interchangeable tray 8cm x 12cm for Secabo heat presses

    Interchangeable tray 8cm x 12cm for Secabo heat presses

    Product In stock

    Réf.:SCB_109.501.03_plateau 8*12

    Interchangeable tray 8cm x 12cm for heat press Secabo.

    For use with TC5, TC7 and TS7 TPD7 press models.

    For use without loading trolley, the optional mounting kit is required.

    To know more about it
    EX. VAT : 89,00 € INCL. VAT : 106,80 €

  • < 6

    in stock

    heat press double tray 40 x 50 cm

    Presse à chaud électrique double plateaux 40 x 50 cm

    Product In stock

    SKU:XNH_FJXHB2-2N -Woodscrew

    Discover our latest heat press with double trays 40 x 50 cm !

    This electric and automatic press will allow you to realize transfers in sublimation, flocking, laser transfer or DTF of high quality. It is ideal for large scale production. Its 2 lower platens of 40 x 50 cm each are easily interchangeable thanks to the quick change system located under the platens. This press is also equipped with a 2 hands closing system to offer you more security during your pressings.

    Time, temperature and pressure settings are easily programmed via the touch screen. With this automatic press, the top plate moves by itself from one plate to the other. You can control the speed of movement with the wheel on the side of the press.

    You can customize all types of media up to 4.5 cm thick.

    A sleep mode is also available to save energy. 

    Tip CréadhésifIf you want to press difficult areas (near buttons, zippers, on shirt collars, ...), you can use a Teflon pad to ensure even pressure on the entire surface. Your pressing will be more efficient and will improve the adhesion of your visual on the support. 

    To know more about it
    EX. VAT : 2 491,67 € INCL. VAT : 2 990,00 €

  • Interchangeable trays for Stahls cap press

    Product In stock

    Ref:STH_PLCAP

    Interchangeable trays are designed for Stahls' cap presses. With the "Quick Change" system it will only take you a few seconds to change your tray. This product is available in many different sizes to fit all cap sizes.

    Available sizes:
    - 7 x 16 cm
    - 6 x 8 cm
    - 7.5 x 14.5 cm
    - 9 x16 cm
    - 10 x 16 cm
    - 10 x 22 cm

    A delay of one week may apply to this product.

    To know more about it
    EX. VAT : 90,00 € INCL. VAT : 108,00 €

  • GridView VueListe

    Articles 21 to 30 out of a total of 38

    Page :
    1. 1
    2. 2
    3. 3
    4. 4