Plastisol ink

GridView VueListe

6 article(s)

  1. 2.5 Kg of screen printing transfer powder - 80 to 200 microns

    Product In stock

    Ref:powder 80-200

    2.5Kg transfer powder - 80 to 200microns

    This transfer powder is to be applied on your screen printing transfer. After firing your transfer at 100°C for 1min30-2min, the powder will melt into the ink. Finally, during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.

    1/ Make these frames with a mirror image
    2/ print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
    3/ Once all the colours are superimposed, sprinkle the powder and remove the excess powder.
    4/ Bake your transfer at 100°C for 1min30-2minutes - Your transfer is ready!

    The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

    This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.

    The powder can be stored in a dry place for 2 years.

    This powder gives your transfer an excellent resistance to washing (up to 90°C).

    To know more about it
    EX. VAT : 71,50 € INCL. VAT : 85,80 €

  2. 2.5 Kg of fine screen printing transfer powder - 0 to 80 microns

    Product In stock

    Ref:Powder 0-80 microns

    2,5Kg of transfer powder - 0 to 80 microns

    This transfer powder is used for the realization of your screen printing transfers. The fine powder is used directly mixed with your ink in a proportion of 10 to 15% depending on the viscosity of your ink.

    After firing your transfer at 100°C for 1min30 - 2min, the powder will melt in the ink. Finally during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.

    1/ Make these frames with a mirror image
    2/ Print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
    3/ Once all the colours are superimposed, apply the last layer of ink containing the powder.
    4/ Bake your transfer at 100°C for 1min30 - 2minutes - Your transfer is ready!

    This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.

    The powder can be stored in a dry place for up to 2 years. 

    This powder gives your transfer an excellent resistance to washing (up to 90°C).

    Tip Créadhésif : press your transfer at 160°C-180°C for 10 to 15 seconds. Peeling is done cold.

     

    To know more about it
    EX. VAT : 71,50 € INCL. VAT : 85,80 €

  3. < 2

    in stock

    Transparent Plastisol glue for screen printing transfer: ready to use

    Product In stock

    Ref:AM122124
    Transparent Plastisol glue for screen printing transfer: ready to use This glue is used on silicone paper. It is ideal for the realization of silk-screen transfer to be applied on light-coloured textiles. Characteristics: Adhesive for preparation of transfer sheets (silicone) and Flock finishing sheets. Good elasticity and flexibility Phthalate-free High elasticity and flexibility Good resistance to washing Read more
    EX. VAT : 23,25 € INCL. VAT : 27,90 €

  4. < 2

    in stock

    White Plastisol glue for screen printing transfer: Ready to use

    Product In stock

    Ref:PLAST PF WHITE TRANSFER - AM122109
    Ready to use white glue for screen printing transfer from Amex This ink is used on siliconised paper. Characteristics: Ink for transfer foil preparation Phthalate-free High elasticity and flexibility 6kg jar Learn More
    EX. VAT : 13,00 € INCL. VAT : 15,60 €

  5. Plastisol AMEX ink - 6 and 7 Kg jar

    Product In stock

    Ref:PLAST - 6KG

    Plastisol quick-flash AMEX ink in 6 and 7 Kg pots

    All our AMEX inks are phthalate-free. They are used for direct printing on cotton, synthetic or mixed fabrics.

    PLAST PF ink is the flagship of the AMEX brand. It is a plastisol system, versatile and easy to use, composed of a considerable variety of neutral, coloured and white bases which can be mixed according to the desired effects.

    PLAST PF ink does not air dry and therefore allows screen printing with frames with a high number of threads (>120 threads/cm2).

    Drying:
    Direct application on fabrics: in an oven for 2 minutes at 150°C
    Application on transfer paper: in an oven for 1 minute at 120-140°C

    You can use it wet-on-wet or with an intermediate flash (3-5 seconds).

    You will obtain with this ink a high covering power, a soft touch, and an excellent colour result.

    To know more about it
    EX. VAT : 40,00 € INCL. VAT : 48,00 €

  6. 50% discount

    Plastisol AMEX ink - 1 kg jar

    Product In stock

    Ref:PLAST PF

    Plastisol ink is the flagship of the AMEX brand. It is a versatile and easy to use plastisol system, composed of a considerable variety of neutral, coloured and white bases which can be mixed according to the desired effects.

    All our AMEX inks are used for direct printing on cotton, synthetic or mixed fabrics.

    AMEX Seriplastik AMEX ink does not air-dry and can therefore be screen printed with frames with a high number of threads (>100 threads/cm²).

    Drying :

    Curing between 150/160° C for 2/3 minutes.
    Ink ready to use, homogenize before use.
    The colours can be mixed together to obtain new shades. However, it is recommended not to mix more than 3 bases together at a time.
    For better opacity and brightness, we recommend adjusting the off-contact and pressure settings.

    To know more about it

    Normal price : 18,00 €

    Special Price EX. VAT : 7,50 € INCL. VAT : 9,00 €

GridView VueListe

6 article(s)