Silkscreen printing

In this section you will find a wide variety of screen printing kits as well as all the equipment and accessories needed to start screen printing textiles.

In order to be always close to your needs, we also propose cleaning kits adapted to water based and plastisol inks.

Complete and practical, our kits will adapt to all your needs. Whether you are a beginner or experienced screen printer, for your own pleasure or to start an activity, you will inevitably find your happiness on our site!

What are the advantages of screen printing?
- A simple and economical printing technique that requires few tools
- A wide range of possibilities (gradient patterns, multi-colour)
- An irreproachable behaviour on the long term
- A professional quality finish
- Intense colours and good opacity
- A great precision of the line
- A great resistance of the colors to the light

And to finally find all the answers to your questions, do not hesitate to consult our section "textile serigraphy" as well as all the Creadhesif tips which benefit most of our products.

GridView VueListe

Items 1 to 10 out of a total of 12

Page :
  1. 1
  2. 2
  1. Adhesive glue for extensible substrates: Texicoll Perfect - Water-based ink

    Product In stock

    Ref:AM100708

    This product is strictly prohibited in delivery BY PLANE for DOM-TOM and countries abroad. Any material or goods considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints and chemicals).

    Découvrez la colle Texicoll Perfect de chez Amex adaptée aux encres à eau pour tous les transferts sérigraphiques sur supports extensibles. Simple d'utilisation,de haute qualité, elle est transparente et bénéficie d'une haute élasticité. Ses propriétés vous permettront de réaliser des créations sur tout type de supports extensibles, qui contiennent entre autre de l'élastane. 

    Application:
    Cette colle s'utilise avec des encres à base d'eau Texprint pour la réalisation de transferts sérigraphiques ou pour la pose de mylar ou flock en sérigraphie. Elle est adaptée aux textiles 100% coton ou cotons avec fibres synthétiques. Elle peut s'appliquer sur un papier siliconé ou polyester.

    L'Astuce Créadhésif : afin d’obtenir un résultat optimum, il est recommandé d’ajuster au mieux le contact de l'écran avec le support et la pression de la raclette. Avant de valider une production auprès de l'un de vos clients, nous vous conseillons de réaliser des tests afin de valider le résultat obtenu.

    Vendue en pot de 1 ou 5 kg 

    To know more about it
    EX. VAT : 15,00 € INCL. VAT : 18,00 €

  2. Adhesive Glue for Low Temperature Transfer: Texicoll BT - Water-based ink

    Product In stock

    Ref:AM100702

    This product is strictly prohibited in delivery BY PLANE for DOM-TOM and countries abroad. Any material or goods considered dangerous is prohibited in the hold or cabin (example: all gas cylinders, industrial lacquers, varnishes or paints and chemicals).

    Retrouvez la colle adhesive à base d'eau TEXICOLL BT de Amex pour le transfert à Basse Température sur textile.

    Elle s'utilise sur un papier siliconé ou polyester, ou avec du mylar et feuille de finition flock. Elle est adaptée aux textiles 100% coton ou aux cotons avec fibres synthétiques. 

    Vendu au format 1kg ou 5kg.

    Caractéristiques :
    - Haute élasticité
    - Hautes propriétés adhésives
    - Excellente résistance au lavage et au sèche-linge
    - Maille imprimable jusqu’à 43 Fils/ CM
    - Transfert à 80°C (pelage à froid)
    - Sans PVC et sans phtalates
    - Sans formaldéhyde

    L'Astuce Créadhésif : afin d’obtenir un résultat optimum, il est recommandé d’ajuster au mieux le contact de l'écran avec le support et la pression de la raclette. Avant de valider une production auprès de l'un de vos clients, nous vous conseillons de réaliser des tests afin de valider le résultat obtenu.

    To know more about it
    EX. VAT : 15,00 € INCL. VAT : 18,00 €

  3. < 2

    in stock

    Transparent Plastisol glue for screen printing transfer: ready to use

    Product In stock

    Ref:AM122124
    Transparent Plastisol glue for screen printing transfer: ready to use This glue is used on silicone paper. It is ideal for the realization of silk-screen transfer to be applied on light-coloured textiles. Characteristics: Adhesive for preparation of transfer sheets (silicone) and Flock finishing sheets. Good elasticity and flexibility Phthalate-free High elasticity and flexibility Good resistance to washing Read more
    EX. VAT : 23,25 € INCL. VAT : 27,90 €

  4. < 2

    in stock

    White Plastisol glue for screen printing transfer: Ready to use

    Product In stock

    Ref:PLAST PF WHITE TRANSFER - AM122109
    Ready to use white glue for screen printing transfer from Amex This ink is used on siliconised paper. Characteristics: Ink for transfer foil preparation Phthalate-free High elasticity and flexibility 6kg jar Learn More
    EX. VAT : 13,00 € INCL. VAT : 15,60 €

  5. < -1

    in stock

    AMEX white water etching ink

    AMEX Discharge White Rodent Ink

    Product In stock

    SKU: TEXPRINT_DISCHARGE_WHITE_AM100629

    A gnawing ink is a water-based ink. It can be used as an undercoat for printing with water-based or plastisol inks. This new and unique formula allows the base to look and behave more like a plastisol ink rather than a water-based ink.

    After opening the jar, you will immediately notice that this base is creamier, holds better and looks shinier than any other base you have used before.

    Our rodent ink can be used with most 100% cotton T-shirts (does not set on polyester).

    WARNING: white etching ink, as well as neutral etching ink, must be activated with a activating agent.

    This agent should be mixed at the base in a proportion of 4 to 6% (we recommend 6%). Make sure that you only activate the amount of ink you need for your print job, because once mixed, the ink has a service life of 6 to 8 hours.


    How to apply a base coat: An undercoat can be applied by printing on gummy ink that will alter the colour of your substrate. Dry quickly (flasher) and then do your print wet on wet. For a silky, shiny result try our white rodent bases which will create a white base.

    Tip Créadhésif : use white gummy ink to obtain a silky and glossy finish.

    To know more about it
    EX. VAT : 20,00 € INCL. VAT : 24,00 €

  6. Rodent base for plastisol ink: Ryocharge

    Product In stock

    Ref.:ryocharge

    Imagine the look and feel of a gnawing ink with plastisol. Just add 50% RyoCharge additive with 50% plastisol ink, mix with the activator and you can now print with a hybrid plastisol/rodent ink. RyoCharge additive works very well with all Plastisol inks.

    Note, RyoCharge base must be activated with activator for rodent ink

    Available in 1 gallon or 5 gallon jars

    Application:

    1) Mix RyoCharge 50/50 with your Plastisol ink. Stir until a homogenous consistency is obtained for mixing. Do not use high speed mixers that can heat the ink and make it harden in the container.
    2) Add 3 to 6% by weight of activating agent to the mixture, and mix until the agent is completely dissolved in the ink.

    Once mixed, the ink can be kept for up to 24 hours.

    Printing:

    Use a squeegee with high hardness. Print wet-on-wet without intermediate drying. The true colour will only appear once the baking process has been completed. On long print runs, when dry, spray the screen with water to improve ink viscosity.

    Drying:

    Bake for a minimum of 90 seconds at 160°C to activate the gumming agent and obtain good wash resistance. Evaporation of the water too quickly stops the gnawing reaction and can lead to dull colours.

    To know more about it
    EX. VAT : 160,00 € INCL. VAT : 192,00 €

  7. Plastisol AMEX ink - 6 and 7 Kg jar

    Product In stock

    Ref:PLAST - 6KG

    Plastisol quick-flash AMEX ink in 6 and 7 Kg pots

    All our AMEX inks are phthalate-free. They are used for direct printing on cotton, synthetic or mixed fabrics.

    PLAST PF ink is the flagship of the AMEX brand. It is a plastisol system, versatile and easy to use, composed of a considerable variety of neutral, coloured and white bases which can be mixed according to the desired effects.

    PLAST PF ink does not air dry and therefore allows screen printing with frames with a high number of threads (>120 threads/cm2).

    Drying:
    Direct application on fabrics: in an oven for 2 minutes at 150°C
    Application on transfer paper: in an oven for 1 minute at 120-140°C

    You can use it wet-on-wet or with an intermediate flash (3-5 seconds).

    You will obtain with this ink a high covering power, a soft touch, and an excellent colour result.

    To know more about it
    EX. VAT : 40,00 € INCL. VAT : 48,00 €

  8. Texprint Water Ink - 1 kg - Drying at room temperature

    Product In stock

    Ref:Texprint Mono

    Texprint Waterbased Ink - Drying at room temperature

    Texprint Mono ink is an opaque water-based ink that dries at room temperature. It is available in various colours and can be used on dark textiles. Ready to use!

    Characteristics:
    - Excellent opacity
    - Single-component ink
    - Drying at room temperature

    Printing:
    In order to obtain excellent opacity and vivid colours, we advise you to carefully adjust your off-contact and squeegee pressure when printing.
    We also advise you to use screens with a mesh size between 34 and 55 threads/cm2.
    It is not recommended to use this ink on a "wet-on-wet" application.

    Drying:
    Texprint Mono ink dries in 72 hours at 40°C. To speed up drying, you can also dry at 100°C.

    Additive :
    - Thickening agent ( Texprint Addensante M ) : add 1 to 5%
    - Universal catalyst ( Texprint universal catalyst ) : increases the resistance to washing : add 1 to 5%
    - Retarding agent ( Texprint Retarding Gel ) : reduces drying on the screen : add 5%
    - Retarding agent ( Texprint Additive S ) : reduces drying on the screen without reducing viscosity : add 5%
    - Texprint No Tack : to increase opacity and obtain a soft touch

    Cleaning:
    Cleaning with water

    Available in 1kg jar

    To know more about it
    EX. VAT : 12,00 € INCL. VAT : 14,40 €

  9. 2.5 Kg of screen printing transfer powder - 80 to 200 microns

    Product In stock

    Ref:powder 80-200

    2.5Kg transfer powder - 80 to 200microns

    This transfer powder is to be applied on your screen printing transfer. After firing your transfer at 100°C for 1min30-2min, the powder will melt into the ink. Finally, during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.

    1/ Make these frames with a mirror image
    2/ print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
    3/ Once all the colours are superimposed, sprinkle the powder and remove the excess powder.
    4/ Bake your transfer at 100°C for 1min30-2minutes - Your transfer is ready!

    The pressing conditions for your transfer are 160°C-180°C for 10 to 15 seconds, cold peeling.

    This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.

    The powder can be stored in a dry place for 2 years.

    This powder gives your transfer an excellent resistance to washing (up to 90°C).

    To know more about it
    EX. VAT : 71,50 € INCL. VAT : 85,80 €

  10. 2.5 Kg of fine screen printing transfer powder - 0 to 80 microns

    Product In stock

    Ref:Powder 0-80 microns

    2,5Kg of transfer powder - 0 to 80 microns

    This transfer powder is used for the realization of your screen printing transfers. The fine powder is used directly mixed with your ink in a proportion of 10 to 15% depending on the viscosity of your ink.

    After firing your transfer at 100°C for 1min30 - 2min, the powder will melt in the ink. Finally during the transfer using a heat press, the hot melt powder is reactivated and will allow the ink to adhere to your textile.

    1/ Make these frames with a mirror image
    2/ Print the colours on siliconised paper as opposed to direct printing on textile and finish with the white undercoat. Quickly dry the inks between prints.
    3/ Once all the colours are superimposed, apply the last layer of ink containing the powder.
    4/ Bake your transfer at 100°C for 1min30 - 2minutes - Your transfer is ready!

    This technique is ideal when you want to store and preserve your transfer prints for on-demand textile printing.

    The powder can be stored in a dry place for up to 2 years. 

    This powder gives your transfer an excellent resistance to washing (up to 90°C).

    Tip Créadhésif : press your transfer at 160°C-180°C for 10 to 15 seconds. Peeling is done cold.

     

    To know more about it
    EX. VAT : 71,50 € INCL. VAT : 85,80 €

GridView VueListe

Items 1 to 10 out of a total of 12

Page :
  1. 1
  2. 2